AutoContact Terminal (S/T is a Terminal) More...

Inheritance diagram for AutoContactTerminal:

Public Member Functions
virtual Box	getNativeConstraintBox () const

virtual AutoSegment *	getSegment (unsigned int) const

virtual AutoSegment *	getOpposite (const AutoSegment *) const

virtual AutoSegment *	getPerpandicular (const AutoSegment *) const

virtual void	updateGeometry ()

virtual void	updateTopology ()

Public Member Functions inherited from AutoContact
Hook *	getBodyHook ()

Hook *	getAnchorHook ()

Component *	getAnchor () const

Net *	getNet () const

const Layer *	getLayer () const

DbU::Unit	getX () const

DbU::Unit	getY () const

DbU::Unit	getDx () const

DbU::Unit	getDy () const

Point	getCenter () const

Point	getPosition () const

DbU::Unit	getWidth () const

DbU::Unit	getHalfWidth () const

DbU::Unit	getHeight () const

DbU::Unit	getHalfHeight () const

Components	getSlaveComponents () const

void	setLayer (const Layer *)

void	setWidth (DbU::Unit)

void	setHeight (DbU::Unit)

void	setSizes (DbU::Unit width, DbU::Unit height)

void	setX (DbU::Unit)

void	setY (DbU::Unit)

void	setPosition (DbU::Unit width, DbU::Unit height)

void	setPosition (const Point &)

void	setDx (DbU::Unit)

void	setDy (DbU::Unit)

void	setOffset (DbU::Unit dx, DbU::Unit dy)

virtual void	translate (const DbU::Unit &tx, const DbU::Unit &ty)

bool	isInCreationStage () const

bool	isInvalidated () const

bool	isInvalidatedCache () const

bool	isTurn () const

bool	isTee (unsigned int direction) const

bool	isHTee () const

bool	isVTee () const

bool	isFixed () const

bool	hasBadTopology () const

bool	canDestroy (unsigned int flags=0) const

bool	canMoveUp (const AutoSegment *moved) const

Contact *	base () const

virtual const Name &	getName () const

size_t	getId () const

virtual Box	getBoundingBox () const

GCell *	getGCell () const

unsigned int	getMinDepth () const

unsigned int	getMaxDepth () const

void	getLengths (DbU::Unit *lengths, AutoSegment::DepthLengthSet &)

Interval	getUConstraints (unsigned int direction) const

DbU::Unit	getCBXMin () const

DbU::Unit	getCBXMax () const

DbU::Unit	getCBYMin () const

DbU::Unit	getCBYMax () const

Box	getConstraintBox () const

Box &	intersectConstraintBox (Box &box) const

void	invalidate (unsigned int flags=0)

void	showTopologyError (const std::string &, unsigned int flags=0)

virtual void	checkTopology ()

void	setGCell (GCell *)

void	setCBXMin (DbU::Unit xMin)

void	setCBXMax (DbU::Unit xMax)

void	setCBYMin (DbU::Unit yMin)

void	setCBYMax (DbU::Unit yMax)

void	setConstraintBox (const Box &box)

bool	restrictConstraintBox (DbU::Unit constraintMin, DbU::Unit constraintMax, unsigned int flags=KbWarnOnError)

void	migrateConstraintBox (AutoContact *other)

Static Public Member Functions
static AutoContactTerminal *	create (GCell gcell, Component anchor, const Layer *layer, Point point, DbU::Unit width, DbU::Unit height)

static AutoContactTerminal *	create (GCell gcell, Component anchor, const Layer *layer, const DbU::Unit dx, const DbU::Unit dy, const DbU::Unit width, const DbU::Unit height)

Static Public Member Functions inherited from AutoContact
static size_t	getAllocateds ()

static const Name &	getStaticName ()

Additional Inherited Members
Static Protected Member Functions inherited from AutoContact
static void	_getTopology (Contact , Component &anchor, Horizontal &, Vertical &, size_t)

Detailed Description

AutoContact Terminal (S/T is a Terminal)

AutoContact that are directly attached by either source or target or both to a terminal.

Member Function Documentation

AutoContactTerminal * create	(	GCell *	gcell,
		Component *	rp,
		const Layer *	layer,
		Point	point,
		DbU::Unit	width,
		DbU::Unit	height
	)

static

Parameters

gcell	The GCell into which create the AutoContact.
rp	The RoutingPad on which to anchor the AutoContact.
layer	The Layer of the AutoContact.
point	The absolute position.
width	The width of the AutoContact.
height	The height of the AutoContact.

Returns: The created AutoContact.

Create a new AutoContactTerminal anchored on rp. point gives the absolute position.

References Component::getBodyHook().

Referenced by GCellTopology::doRp_AccessPad(), and GCellTopology::doRp_AutoContacts().

AutoContactTerminal * create	(	GCell *	gcell,
		Component *	rp,
		const Layer *	layer,
		const DbU::Unit	x,
		const DbU::Unit	y,
		const DbU::Unit	width,
		const DbU::Unit	height
	)

static

Parameters

gcell	The GCell into which create the AutoContact.
rp	The Component on which to anchor the AutoContact.
layer	The Layer of the AutoContact.
x	The absolute X position.
y	The absolute Y position.
width	The width of the AutoContact.
height	The height of the AutoContact.

Returns: The created AutoContact.

Create a new AutoContactTerminal anchored on rp. (x,y) gives the absolute position.

The anchor component rp is most often a Hurricane::RoutingPad (occurrencing a Hurricane::Segment) or directly a Hurricane::Segment, in case of RoutingPad layer promotion.

References Katabatic::CntInCreationStage, Contact::create(), Component::getPosition(), and DbU::getValueString().

Box getNativeConstraintBox ( ) const

virtual

Returns: The native constraint box (that is, whithout any user constraints applied). For AutoContactTerminal, this is the Box of the supporting external component, and for all others the bounding box of the owning GCell.

Reimplemented from AutoContact.

References AutoContact::getAnchor(), GCell::getBoundingBox(), Occurrence::getEntity(), RoutingPad::getOccurrence(), Transformation::getOrientation(), Occurrence::getPath(), Component::getPosition(), RoutingPad::getSourcePosition(), Segment::getSourcePosition(), RoutingPad::getTargetPosition(), Segment::getTargetPosition(), Path::getTransformation(), and DbU::getValueString().

AutoSegment * getSegment ( unsigned int index ) const

virtual

Returns: The nth anchored AutoSegment. The index is significant:

0 : first horizontal (h1).
1 : second horizontal (h2).
2 : first vertical (b1).
3 : second vertical (b2).

Not all the indexes are filled for every AutoContact. For example Turn have h1 and b1, and HTee have h1, h2 and v1.

Implements AutoContact.

References AutoSegment::isHorizontal(), and AutoSegment::isVertical().

AutoSegment * getOpposite ( const AutoSegment * reference ) const

virtual

Returns: The other AutoSegment the same direction as reference, this is only meaningful on AutoContactHTee or AutoContactVTee. If there is no opposite, NULL is returned.

Implements AutoContact.

AutoSegment * getPerpandicular ( const AutoSegment * reference ) const

virtual

Returns: The AutoSegment in the perpandicular direction to reference, this is only meaningful on AutoContacTurn. It there is no unique perpandicular, NULL is returned.

Implements AutoContact.

void updateGeometry ( )

virtual

Compute the new position of the AutoContact based on the AutoSegment positions. The Session mechanism ensure that all AutoSegment are set into their final positions before calling this updator.

Implements AutoContact.

References AutoContact::base(), DebugSession::close(), Katabatic::CntInvalidated, Interval::contains(), AutoContact::getNet(), AutoContact::getUConstraints(), DbU::getValueString(), AutoSegment::getX(), AutoSegment::getY(), AutoContact::hasBadTopology(), Go::invalidate(), AutoSegment::isCreated(), AutoSegment::isHorizontal(), AutoContact::isInvalidatedCache(), Katabatic::KbHorizontal, Katabatic::KbVertical, DebugSession::open(), AutoContact::setX(), AutoContact::setY(), and AutoContact::showTopologyError().

void updateTopology ( )

virtual

Restore the topology (i.e. connexity) of the contact after the incident segment has changed layer.

Based on the layer depth delta between the terminal and the segment three case can occurs:

The delta is zero, then just sets the layer of the contact to the common metal layer.
The delta is one, then sets the contact layer to VIA connecting the two layers.
The delta is two, then create a dogleg to restore the connexity. Depending on whether the terminal was attached to the source or target, sets the layer of the segments.
A delta of more than two is an error, and must never occurs.

As, by default, the perpandicular is set in the layer above the parallel, it may be necessary to adjust his layer as well (to the one below).

Update Terminal Topology

Implements AutoContact.

References DebugSession::close(), Katabatic::CntBadTopology, AutoContact::getAnchor(), RoutingGauge::getContactLayer(), AutoContact::getLayer(), AutoSegment::getLayer(), RoutingGauge::getLayerDepth(), AutoContact::getNet(), Session::getRoutingGauge(), RoutingGauge::getRoutingLayer(), AutoSegment::invalidate(), AutoContact::isInvalidatedCache(), AutoSegment::makeDogleg(), DebugSession::open(), AutoContact::setLayer(), and AutoContact::showTopologyError().

The documentation for this class was generated from the following files:

AutoContactTerminal.h
AutoContactTerminal.cpp
AutoContactTerminal.dox

Katabatic - Routing Toolbox

Public Member Functions

Static Public Member Functions

Additional Inherited Members

Detailed Description

Member Function Documentation