* Change: In Hurricane, the NetRoutingProperty is moved into Hurricane
from Katabatic. Needed for Knik to be able to access thoses
informations.
* Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in
case of identical area, select the component of lowest id.
This should not be needed if the component ordering was fully
deterministic as it should be (will investigate later).
This is to ensure that the choosen component is always the
same, especially between save/load of a global routing.
* Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate
the segments only if the topology is valid (no NULL in the
cached segments).
* Bug: In Katabatic, in GCellTopology::construct(), throw an error
if the topology is bad instead of trying to continue (and core
dump later... ).
* Bug: In Kite, in BuildPowerRails, distinguish the name of the master
net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the
name of the net in the *chip* netlist. Must use the later to make
comparison as they may differs.
* Change: In Knik, in save/load solution, exclude nets that are not
globally routed by Knik. That is which NetRoutingProperty is not
*Automatic*.
* Bug: In Cumulus, in chip.BlockPower take account of the layer
width extention to sligthy shrink the connector thus avoiding a
notch with standart cell in some cases.
* Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner
trees for the leaf clocks, as it seems overconstrained for the
router. First move was to lower them in M2/M3 (instead of M3/M4)
but that was not sufficent.
* New: In Cumulus, RSavePlugin for recursively saving a physical
hierarchy.
* New: In documentation, first embryo for RDS file. Should have been
in Alliance git, but I prefer to keep newest doc in Coriolis.
* Change: In bootstrap, in ccb, builder and coriolisEnv.py, correct detection
of the windows architecture (32 or 64 bits). Under Cygwin, add the
directory of the dll into the PATH also. Uses "site-package" as the
location of Python modules (*not* "dist-package").
Use gnu++0x under Cygwin instead of c++11.
* Change: In Etesian, if Coloquinte is not found, do not stop the compilation,
just disable the tool altogether.
* Change: In Hurricane, In Backtrace, disable backtrace under Cygwin as it
uses features specific of the glibc.
* Change: In Knik, use HUGE_VAL instead of HUGE (not present under Cygwin),
add the <cmath> header.
* Change: In Unicorn, Coloquinte no longer stops the compilation.
* Change: In bootstrap, in ccb & builder, build by default with Qt4 and
provide a --qt5 command line switch to enable Qt5.
FindBootstrap.cmake now provides a qtX_wrap_cpp() macros to be
independant of the version of Qt being used.
Add all thoses options to the graphical interface to the builder.
* Change: In all the tools using Qt, switch to the qtX_*() macros from
FindBootstrap.cmake.
* Change: In Hurricane, in CellViewer, revert to the Qt4 way of connecting
signal/slots for backward compatibility.
* New: In all to CMakeLists.txt, disable the warning about deprecated
WIN32 under cygwin.
* New: In boostrap, in ccb.py, coriolisEnv.py and builder/Configuration.py
add recognition in uname for the values returned under Windows/Cygwin.
* New: In Documenation, in UsersGuide.rst add some informations about
Cygwin and a section for the devel branch.
* New: In Knik, in <KnikEngine>, the methods ::initGlobalRouting(), ::run()
and ::Route() now accepts one argument, a reference to a map of not to
be routed nets (the key being the name for fast search by name).
This feature is introduced to prevent the routing of nets for which
a global/detailed routing is already supplied by the designer. For now
it applies to the clock tree.
* Change: In Kite, Katabatic & Knik, express the number of tracks truly
available to the global router by the number of tracks reserved to
the local routage inside a GCell. Replace the ratio parameter
"hEdgeCapacity" by an integer parameter "hTracksReservedLocal"
(duplicate for verticals).
It is more explicit to give directly the number of tracks that
are to be used locally, and potentially saves us from rouding
problems when calculating the number of availables tracks.
Note: we cannot do that for the layer saturateRatio as it
uses the density ratio that take account local wires, leading
to fractional results.
* Change: In Katabatic, in <GCellGrid>, rename checkEdgeSaturation()
into checkEdgeOverflow(), more explicit.
* Change: In Knik, in <Graph>, display the computed capacities of the
lower left node edges (should be the same througout all the grid).
* Change: In Unicorn, in <cgt.py>, uses the new parameters names for
edge density.
When upgrading from doxygen 1.5.x to 1.8.5 the way the documentation
is generated has underwent many changes, particularly in the headers.
* Change: In <header.html>, must include the javascripts <jquery.js>
and <dynsections.js>.
* In <CMakeLists.txt>, as the header is customized, doxygen seems not
copy some files like the javascripts and some images (open.png,
closed.png). So we copy them from doxygen installation and make
the CMakeLists.txt install them. I hope they will not change too
much in the future.
* In <doxyfile>, disable markdown support as it do not interpret
correctly the formating we already adopted (with a left margin
to put command into). Use HTML_EXTRA_STYLESHEET instead of
HTML_STYLESHEET. Enable the index (DISABLE_INDEX=NO), for the
top header. Enable dot for inheritance diagram. Set the
EXAMPLE_PATH=. to include the synthetic hierarchy.
Correct the tag inclusion (faulty path in some places).
* In <SoC.css>, create style for the new header generated by doxygen.
* In the documentation, move the synthetic hierarchy into a module.
Miscellaneous:
* Change: In <crlcore>, in display.conf use the same display threshold
for both METAL2 & METAL3.
In alliance.conf, the side of VIAs in the gauge is 2l (not 3l).
In kite.conf, separate edge densities for H/V.
* Change: In <Cell>, in flattenNets() use flag as argument, not a
boolean. Do not create rings for clock or supply nets.
* Change: In <DeepNet>, in _createRoutingPads() do not create rings
for clock or supply net (duplicated policy as in Cell::flattenNets()).
* Bug: In <ControllerWidget>, at last find the bad signal disconnect
that was causing ungraceful messages.
* Change: In <knik>, in Edge display occupancy/capacity in the string
name. Improved display progress and debugging capabilities.
Improved exception catch & breakpoint managment:
* Bug: In <PaletteWidget>, in updateExtensions() replace the calls to
deleteLayer() by delete. This cause the widget to be immediatly
erased instead of waiting for the event queue to be completly
processed. This was causing the widget to be left in a incoherent
state when stoping at a breakpoint.
* Bug: In <BreakpointWidget>, in execNoModal(), flush the main event
loop (QApplication::flush()) *before* lauching the *local* event
loop. This is to ensure all widgets are in their final state when
waiting (especially <PaletteWidget>).
* Change: In <ExceptionWidget>, new method catchAllWrapper() to
execute any std::function< void() > function/method with a "try"/
"catch" wraparound and lauch the widget in case something is catch.
* New: In <hurricane>, support for a oberver pattern, backported from
<katabatic> with an Obervable capable of being linked to any
number of Obervers.
* New: In <Cell>, made it observable to detect Cell change, currently
emit two kind of signals:
- Cell::CellAboutToChange : *before* any change.
- Cell::CellChanged : *after* the change has been completed.
* New: In <UpdateSession>, in Go::invalidate() add the Cell owning the
Go to the UPDATOR_STACK (of course the cell is added only once).
In addition, when the Cell is added, send a notification of
Cell::CellAboutToChange to all it's observers. The slave instances
are also invalidated.
Conversely in UpdateSession::_preDestroy() for each invalidated
Cell send a Cell::CellChanged notification to all observer.
The UPDATOR_STACK has been slightly amended to accept Cell which
are not Gos. Prior to this, the Cell where completly excluded from
the UpdateSession mechanism, so it's instances where never actualised
of anything referring to the Cell for that matter.
Note: we use two different mechanisms to transmit a Cell change,
observers and the slave instance map. I think at some point it
should be unificated.
* Change: In <CellViewer>, make it a Cell observer to redraw when the
cell is modificated (also update the palette).
Uses the catchAllWrapper() to protect all critical actions.
* Change: In <GraphicTool>, no longer need of cellPreModificated and
cellPostModificated signals. Now done through the Cell obersvers.
* Change: In <mauka>, <etesian> & <kite> now uses the catchAllWrapper
method for protection (need to split methods in two, to be able
to pass it as argument). No longer emit cellPreModificated and
cellPostModificated.
Support for RoutingGauge in P&R:
* Bug: In <placeandroute.py>, the connection from the internal power
ring to the connectors was not done correctly. Wrong contact layers
leading to a gap.
* Change: In <BuildPowerRails>, detection of the corona signals based
on how the "pck_px" pad is connected. No longer based on name
matching.
* Change: In <placeandroute.py>, support for 2 routing metal only
(3 metal in the technology).
* Change: In <katabatic> & <kite> support for a "top layer" limitation
on the routing gauge, this allows to use only two routing metals
(METAL2 & METAL3). Work in progress.
Cleanup:
* Cleanup: In <vlsisapd/src/bookshelf>, remove unused file Bookshelf.cpp
(may have been a parser once upon a time).
* Cleanup: In <hurricane>, in Cell::flattenNets() use flags instead of
booleans to be more readable. Allow occurrence placement checking.
* New: In <crlcore> add Python wrapper for the Ispd05 loader.
* New: In <unicorn> add option for direct loading of ISPD05 designs.
* Bug: In <hurricane/src/viewer>, RecordModel must emit
layoutAboutToBeChanged() before changing the record contents (and
layoutChanged() afterwards).
Update to Qt 5:
* Change: Now requires at least cmake 2.8.9.
* Change: CMakeLists.txt needs small changes. Qt modules must be found
one by one (Core, Gui, Widgets). Must add "set(CMAKE_AUTOMOC ON)"
in the top file and replace "qt4" prefix in macros by "qt5".
Added simpler macro "setup_qt()" in FindBootstrap.cmake.
* Change: No longer need to include <QGtkStyle> is is choosen by default
according to the current desktop environment.
* Change: In <hurricane>, In HApplication, launch ExceptionWidget when
a std::exception is catched instead of silently discarting it.
New placer Tool: Etesian
* New: <etesian> analytical placer. Encapsulate Coloquinte from
Gabriel Gouvine.
* New: in <documentation>, add stub demonstration ToolEngine <smurf>.
Needs to be commented.
Miscellaneous:
* New: in <boostrap> and <unicorn>, added support for Etesian, the new
analytic placer. The tool itself will be added in the next commit.
* Bug: in <CellWidget>, when shifting the display buffer, we no longer
can copy the buffer on itself (we should never have). Now go through
a temporary one (PlaneId::AutoCopy) which is added to the
DrawingPlanes. Affect "goLeft()" and "goUp()".
* Bug: In <CellWidget>, remove the WA_PaintOnScreen flag/attribute.
When it's on, no PaintEvent is transmitted to the CellWidget
when it's the central widget of the <CellViewer> (QMainWindow).
It's something I still don't understand from the doc of Qt.
* Change: In <AreaCommand>, use the PlaneId enumeration instead of a
anonymous numerical index.
* Change: In <HApplication>, no longer catch and silently discard
standartd exceptions but launch the ExceptionWidget...
Suppress the now deprecated constructor with "Type" argument.
* Change: In <SelectionModel>, the "reset()" method is deprecated in
Qt5, instead enclose the "clear()" by a "beginResetModel()" and
"endResetModel()" pair.
* New: In <crlcore>, add support for ISPD05 benchmarks (in Bookshelf
format). Forked from ISPD04 and not finished yet.
* Change: In <Mauka>, distinguish the Action string identifier from
<Etesian>
* New: In <unicorn>, add entry for ISPD05 loader. Add entry for
<Etesian> analytic placer.
Details:
* New: in <bootstrap>: add support for devtoolset-2 in ccb. Run the
cmake commands through 'scl', set shell environment variables
BOOST_INCLUDEDIR & BOOST_LIBRARYDIR and disable the default
system path search.
* Change: In various flex scanners add the %nounput to suppress
compiler warnings.
* Change: Little cleanup for g++ 4.8.1 as it's more strict.
* Change: In various top CMakeLists.txt, suppress extraneous '/'
after DESTDIR.
Project hierarchy reorganisation:
* With svn, we were doing a tool by tool checkout, suppressing the
whole repository hierarchy level.
* The tools were also grouped, inside one repository, into multiple
projects (<bootstrap>, <vlsisapd>, <coriolis>).
* We do not want to split up each tool into a separate repository,
given their tight integration (except for vlsisapd).
* We choose to simplify, and consider all tools in a svn repository
one project. Due to the way Git clone repositories, the directory
containing the project is now to be seen under "src/".
CMake modifications:
* Now that the <vlsisapd> and <bootstrap> projects are merged into
coriolis, modificate the top CMakeLists.txt of each tool to uses
only Coriolis (and bootstrap hard wired).
CCB compile script modifications:
* Uses the new source tree hierarchy, with the project directory
inserted.
* Remove (comment) all parts relateds to svn managment.
* Git is sufficiently simple so that we do not want to integrate
command shortcut into the script.
SVN cleanup:
* Remove the obsolete <chamsin> tool, that has become the full fledged
<chams> project long time ago.
- Bug: In Edge::getCost(), when the edge capacity is null, return maximum
cost (HUGE).
- Bug: In Knik::saveSolution(), saves only Segments that belongs to global
routing, that is in GMetalH/GMetalV.
- Change: In KnikEngine, calculation of saturation is now using the RoutingGauge,
but still uses a hard-wired CellGauge.
- Change: Obstacles are now taken into account for saturation.
- Bug: target_link_libraries() must be put back for OSX Snow Leopard
(doesn't seems to affect Leopard). As I do not have an OSX under
my hand it's untested and is likely to fail at that point.
- Library linking: there must not be "target_link_library()" for libraries,
only when building binaries. Avoid clashes between static module
or class variables, and strange reinitialisation of those variables.
- Change: Boost is now always linked staticly.
- Change: adopt a tree layout compliant with the UNIX FHS.
* includes under TOP/include/coriolis2.
* shared datas under TOP/shared/coriolis2.
* docs under TOP/share/doc/coriolis2.
* configuration under TOP/etc/coriolis2
* ./crlcore:
- Change: In Environment, comply to the new tree layout, search configuration
files under TOP/etc/coriolis2/.
* ./knik:
- Change: In flute, comply to the new tree layout, get the "POW*.dat" files
from TOP/share/coriolis2/flute-2.4.
libraries gets installed in "lib64" instead of "lib".
buildCoriolis.py sets automatically LIB_SUFFIX for cmake.
coriolis2.spec modificated to uses lib64 on 64 bits.
- Change: In the CMakeLists.txt, in all the install commands remove all
the leading "/" as they prevents the CMAKE_INSTALL_PREFIX to be took
into account. It was nevertheless working because buildCoriolis.py was
using DESTDIR which is prepended anyway.
* ./goodies:
- Change: In buildCoriolis.py, no longer uses the DESTDIR but instead
CMAKE_INSTALL_PREFIX.
- New: KnikEngine::computeSymbolicWireLength(), which adds to the measurments
1. - The sum of global wire length (in lambdas).
2. - The abutment box area of the design (in square lambdas).
3. - The saturation ratio of the design: wire length divided by area and
normalized by a "fully routed GCell".
- Change: In KnikEngine::initGlobalRouting(), increase the maximal degree
of net to be routed (1000 -> 13000). This to allow the clock to be
routed of the "vld" circuit.
- Bug: In top CMakeLists.txt the SETUP_PROJECT_PATHS was not inserting
X_USER_TOP *before* X_TOP, thus potentially allowing an obsolete
system-wide configuration to shadow an up-to-date local one.
* ./knik:
- Bug: In MatrixVertex, still the same index bug problem (incomplete
correction).
- Bug: In MatrixVertex::getLineIndex() and getColumnIndex(), in regular
mode, when the Y/X coordinate is exactly on the upper right angle,
return the inferior index (instead of superior which is out of bounds).
- Change: In MatrixVertex, RoutingGrid & KnikEngine, replace the _lowerLeftX &
_lowerLeftY by a complete copy of the Cell's abutment box. Makes
easier for getLineIndex() to find out of bound coordinates.
- Change: In KnikEngine & LoadSolution add a time/memory measurement,
for Kite statistics.
- Change: <PROJECT>_SEARCH_PATH are put back into the *first* tool of
a project.
- Bug: In HURRICANE_CHECK_MACRO(), the quiet flag was not correctly
implemented. User ARGV instead of argv (case sensitivity!).
- Change: New structure for the installation & CMake system.
* Tools are now grouped in "projects". There are three projects:
1. - IO: Standalones parsers/drivers (IO_USER_TOP, IO_TOP).
2. - Coriolis: Base & digital tools (CORIOLIS_USER_TOP, CORIOLIS_TOP).
3. - Chams: Analogic tools (CHAMS_USER_TOP, CHAMS_TOP).
Each *project* has a two "TOP" environement variables, for
example: IO_TOP and IO_USER_TOP. Thoses variables are the only
ones useds to locate the tool (CMake modules, headers & libraries).
The local path always takes precedence over the global one.
The localisation process occurs in each tool top CMakeLists.txt
where the macro SETUP_PROJECT_PATH is to be defined. There is no
way to put it in a shared includes file as it's the macro precisely
used to locates the includes... You have to call the macro once for
each project you wants to uses:
SETUP_PROJECT_PATHS(IO)
SETUP_PROJECT_PATHS(CORIOLIS)
* In FindTOOL.cmake, supress the <TOOL>_DIR_SEARCH and uses the
<PROJECT>_DIR_SEARCH instead (example: CORIOLIS_DIR_SEARCH).
* buildCoriolis.py modificated according to the new "TOP" scheme.
./coriolis/src/crlcore,
./coriolis/src/knik,
./coriolis/src/katabatic,
./coriolis/src/kite,
./coriolis/src/equinox,
./coriolis/src/solstice,
./coriolis/src/ispd:
- SVN MOVE: Source tree simplification & uniformisation. Now all tools
are at the same level, directly under the root of the repository.
No more "coriolis/src".
Jean-Paul Chaput
Sophie Belloeil