* New: In CRL::PyAllianceFramework, export getCatalog(), in PyCatalog,
export the getState(name) method and add a PyCatalog_Link().
In PyCatalogState, add PyCatalogState_Link(), cannot use the
macro because of the C++ name resolution operator (Catalog::State).
* New: In Isobar, export the RoutingPads collection to the Python interface.
* New: In Hurricane::Net, export the getRoutingPads() method to the
Python interface (hence the need of the previous export).
* Bug: In Hurricane python module, forgot to add the Segment type.
* Change: In Isobar/layer.getEnclosure() wrapper check and cast the Layer
argument into BasicLayer.
* Change: In CRL::RoutingGauge::getLayerGauge(Layer*), getLayerType() and
getLayerDirection() no longer check layer identity based on layer
mask instead of just Layer* pointer. To allow a unified call wether
the layer is real or symbolic.
* Change: In CRL::RoutingLayerGauge::getTrackIndex() and getTrackPositon(),
no longer consider negative indexes as invalid and reset them to
zero. The check for out of bound index is now left to Anabatic &
Katana.
* Change: In CRL/RoutingGauge.getRoutingLayer() and getContactLayer(),
more detailed error message.
* Change: In CRL/RoutingLayerGauge.getTrackIndex() and getTrackPosition(),
indexes are now signed long instead of unsigned.
* Change: In boostrap, remove support for Chams.
* New: In Hurricane::Technology, added support for DTR rules, UnitRule,
PhysicalRule and TwoLayersPhysicalrule. Added devices descriptors and
models descriptors (for Spice). Spice description is not used yet
but kept anyway in case of future use.
* New: Hurricane::Analog whole library and it's Python interface. This
provides support for transistors, capacitors and resistors. Only
transistor support is fully implemented as of now.
* New: In CRL/python/coriolisInit.py, read configuration files for the
Analog extension (analog.conf & devices.conf). Thoses are optionals
and a simple warning is issued if not found.
Added helpers/AnalogTechno.py DTR loading helper.
Add analog configuration files for 180/scn6m_deep_09.
* New: Oroshi tool that provides actual layout drawing for transistors.
* Change: In Hurricane::Polygon, store the points so they are always
ordered in the counter-clockwise (trigonometric) direction. This
simplicificate internal computations.
* New: In Hurricane::Polygon, added getSubPolygons() methods, that
split horizontally the polygon in sub-polygons of about 1000
vertexes. This is mainly to be used by the GDSII driver to abide
to the XY 4000 points limitation.
* New: In Hurricane::Isobar, export support for Point collections so
the various contour Polygon methods can be created in the Python
interface.
* New: In CRL::GdsDriver, split the Polygons into set of sub-polygons
of less than 1000 vertexes. Use the getSubPolygons() method.
* Change: In stratus1.dpgen_RF2, makes more explicit error messages
about placement by displaying the faulty vs. expected coordinates.
* New: In CRL, implement a GDSII parser. The complete syntax is supported,
but only a few subset is really taken into account. It is intended to
load the layout of standard cells only. The interface of the cell is
provided through a LEF file and it complete layout through the GDSII.
The loader work in a Library way. It takes a Hurricane library as
argument and search in the GDSII library structures with a name
matching the Cell of the library and complete them.
* Change: In Hurricane::Component, put the Contour methods at Component
level so we can use them in a generic way in the CellWidget drawing
primitives.
* New: Hurricane::Rectilinear polygon, for small rectlinear polygons.
Should be less than 100 vertexes. For bigger ones, use Polygon
which allows slanted egdes.
* Bug: In CRL, freepdk_45/technology.conf, there seems to be an incoherency
bettween the GDSII layer numbers as defined in the Cadence FreeePDK45.tf
file and the one used in the supplied layout of the GDSII cells.
For now, we align on the GDSII cells to get nice layouts, but it
has to checked.
* New: In Hurricane::Diagonal, new object to represent 45° and 135°
segments (X routing). Althought they have source & target, they
are not articulated like Horizontal & Vertical, due to the
combined displacement of X and Y (diagonal).
Maybe we should create a common class for all the polygons
to make "::getContour()" a method.
Now we could represent self capacitances and high frequency
wires.
* New: Hurricane::Triange as been renamed into Hurricane::Polygon.
Add support for convex polygons. Polygon are approximateds by
excess by a manhattan rectilinear polygon (with potentially
thousands of vertexes). To reduce the memory footprint,
compaction techniques reducing by at least a factor 4 has been
implemented. We could go further by only storing the non-repetitive
part of the edge (defined by the integral fraction dY/dY).
We will see, if the program slows too much.
The manhattan approximate is always computed but displayed
only if the polygon grid step is greated than 4 pixels.
The level of approximation of the polygons can be controlled
through the "DbU::_polygonStep" parameter.
* Change: In CRL/coriolisInit.py and CRL/helpers/Technology.py, regroup
all DbU related parameters into "technoConfig" (i.e. suppress
"viewerConfig"). Update all the relevant technology.conf configuration
files.
Change the loader behavior so that "technoConfig" is read first
and is now responsible for creating the Technology of the DataBase.
* New: In Hurricane::CellWidget, added support for displaying mahanttanized
polygons.
* Change: In documenation/scripts/expample/polygons.py, perform (I hope)
a comprehensive test of the polygons (check all slopes, clockwise and
conter-clockwise).
* New: In Hurricane::DbU, added template to manage vector<> of DbU.
Support for the "polygonStep" parameter.
* New: In Anabatic_AutoSegments collection, added a Flag to the constructors
to allow different behavior between digital and analog modes.
For "Aligneds" and "Perpandiculars" collections, now manage a new
Flag WithDoglegs to follow aligned globals through local doglegs
(for analog nets).
Adjust the log level of collections to 144 (formerly 145).
* New: In Anabatic::AutoSegment, new flag SegAnalog for segments that are
part of an analog net.
Note that with this flag, we reach the 32 bits limit...
* Change: In Anabatic::Constants, Flags are now declared as BaseFlags
objects and *not* uint64_t. This avoids overload resolution problems with
arithmetical overload of the operators.
The BaseFlags/Flags types are now completly "isolated" from the
uint64_t, it has the advantage of showing where unwanted previous implicit
conversions where occuring.
* Change: In Katana::Constants, Flags values are now of BaseFlags type instead
of uint64_t.
* Change: In Anabatic::Dijkstra, lots of log cleanup.
* Change: In Anabatic::GCell::getSide(), make the "shrink" parameter visible
to allow to substract the topmost and rightmost track for axis span
computation in AutoSegment::computeOptimal(). Used for analog mode.
* Change: In NetRoutingState, added a flag for analog mode. Use uint32_t
for the flags type.
* New: In Isobar, export the NetRoutingState and NetRoutingExtension objects.
* Bug: In Hurricane::DbU, replace long by DbU::Unit (aka int64_t) in all
remaining occurrences.
* Change: In Hurricane::DbU::getValueString(), rewrite using ostringstream.
* Change: In Hurricane, in PyHurricane.h, PyAny_AsLong<> template to
convert any kind of Python integer into DbU, making sure we always
use 64 bits integers (long long for 32 bits and long for 64 bits).
PyDbU_FromLong<> template to peform the reverse, DbU to Python
integer in 64 bits (either using PyLong_FromLong() or
PyLong_FromLongLong()).
* Bug: In Isobar, in PyArg_ParseTuple(), never use the "l" direct
converter when reading a DbU. Instead read a PyObject then convert
using PyAny_AsLong<>. This ensure to never do a truncature.
* Change: In Hurricane Commons.h, even when cdebug print nothing, it slow
down the program (three times for Kite!). Create a macro cdebug_log
which calls cdebug *only* if the debug level is active.
* Change: In Hurricane, in Flags add operator overload for "int" type
and not only "unsigned int". Otherwise the compiler complaints about
ambiguous overload when using enum values which are considered as
"int".
Simpler code for the BaseFlags::contains() method.
Added implicit conversion from BaseFlags toward bool type.
* Change: In Hurricane, in Commons, complete replacement of the previous
two trace systems (trace & ltrace) by a stream-based one.
As it is a true object it is much less fragile than the one based
on defines (but maybe a little slower).
Define a reservation table for the trace levels for all the
Coriolis & Chams components.
* Change: All tools, use the new trace system.
* Change: In Hurricane, in PyHurricane.h, in all DirectSet*() macros,
suppress the third parameter giving the function name. It is now
build from stringification of other parameters.
The various macros calls are also modificated all througout
Isobar.
Added PyAny_AsInt() to convert a Python Int or Long into an int.
Maybe we should manage only long, because the type difference seems
ambiguous in Python itself.
* Change: In Hurricane, in PyHurricane.h, in DirectGetBoolAttribute()
deduce the function name to display in messages from the arguments.
Idem for DirectIsAFromCStringAttribute(), DirectGetIntAttribute(),
DirectGetUIntAttribute(), DirectGetDoubleAttribute() and
DirectGetStringAttribute().
* New: In Hurricane, in PyHurricane.h, new macro DirectGetNameAttribute()
to build accessors for method returning a Name.
* New: In Hurricane, in PyHurricane.h, new macro DirectSetIntAttribute()
to build modificators taking int arguments.
* Bug: In Hurricane, in PyHurricane.h, in macro DirectSetBoolAttribute(),
the check for a boolean PyObject was wrong, leading the macro to
systematically emit a Python exception.
* Bug: In Hurricane, in PyInstance method table, PyLibrary_create() was
registered as a NOARGS function, but it *do* have arguments, change
to VARARGS.
* New: In Hurricane, dedicated class BaseFlags to wrap a set of flags.
Similar to the Mask class, only with a slightly different semantic.
Encapsulation of <unsigned int>.
Also provide support for the Inspector, to have a human-readable
display of the flags.
* Change: In Hurricane, in Cell, regroup all the flags under a Flags
sub-class of Cell. No more mixing between booleans and bit flags.
(first use of BaseClass).
* In Hurricane, CRL Core & Knik, many small corrections to suppress
annoying warning messages at compile time.
Most noticeably, Bison errors in VstParserGrammar generated by
rules and token with mismatched return value type. This was not
problematic because the badly defined return value where not used.
But still...
* Bug: In Bootstrap, in coriolisEnv.py, check if devtoolset-2 is already
active before launching it as a sub-shell.
* Bug: In Isobar, In PyHurricane.h, DBoDestroyAttribute() set the proxy
pointer toward the C++ object to NULL. So when the Python object is
deleted no double-deletion occurs on the C++ object.
Add some more trace information in Python link/dealloc.
* Change: In CRL Core, in cyclop, make CMakeLists.txt automatically
choose the right rule for linking the binary wether we use Qt 4 or
Qt 5. Very irksome problem.
* New: In EtesianEngine::addFeed(), do not take into account instances
that are not placed entirely inside the top cell abutment box (was
causing a core dump).
* Bug: In Katabatic, in GCellQueue, correct a mismatch between a GCell
set and the iterators used upon it.
* Bug: In Mauka, in Row & Surface correct a mismatch between a container
and it's iterator.
* New: In Etesian, updated to work with the latest Coloquinte, patch
contributed by G. Gouvine.
Added EtesianEngine::setDefaultAb() to compute an abutment box if
the Cell is completly unplaced.
* New: In cumulus, in ClockTree, now the placer can be configured to be
either Mauka (slow simulated annealing) or Etesian (fast analytic).
New setting 'clockTree.placerEngine' in plugin settings.
* New: In CRL Core, in helpers & alliance.conf, set and read a "PAD"
variable to define the pad model name extension ("px" for "sxlib
and "pxr" for vsxlib, this is provisional).
* New: In CRL Core, in plugin.conf, add parameters to define the name
of used for power & clock supply. We may remove the extention in
the future (to be more coherent with the previous modification).
* New: In Cumulus, in chip.Configuration.GaugeConf._rpAccess(), no
longer place the accessing contact *at the center* of the
RoutingPad. It works under sxlib because buffers & registers all
have same size terminals. But this is not true under vsxlib,
leading to misaligned contacts & wires. Now systematically place
on the slice midlle track (maybe with one pitch above or below).
This is still very weak as we do not check if the terminal
reach were the contact is being put. Has to be strenthened in
the future.
* New: In Cumulus, in chip.Configuration.ChipConf, read the new
clock & power pad parameters.
* Change: In Isobar (and all other Python wrappers), uses PyLong instead
of PyInt for DbU conversions. In PyHurricane argument converter,
automatically check for both PyLong and then PyInt.
* Change: In Cumulus, in chip.PadsCorona, more accurate error message
in case of discrepency in global net connections (i.e. no net
of the same name in instance model and instance model owner.
* Change: In Kite, in BuildPowerRails, when looking up at the pads
model name to find "pck_" or "pvddeck_", do not compare the
extension part. But we still use hard-coded stem pad names,
maybe we shouldn't.
* Bug: In Katabatic, in GCellConfiguration::_do_xG_xM1_xM3(), there
was a loop in the search of the best N/E initial RoutingPad.
* Bug: In Kite, in KiteEngine::protectRoutingPads(), *do not* protect
RoutingPads of fixed nets, they are already through the
BuildPowerRails stage (and it's causing scary overlap warning
messages).
* Bug: In Cumulus, in ClockTree.HTreeNode.addLeaf(), do not create
deep-plug when the core is flat (not sub-modules). All the new
nets are at core level.
* Bug: In Cumulus, in ChipPlugin.PlaceCore.doFloorplan(), ensure
that the core is aligned on the GCell grid (i.e. the slice
grid of the overall chip).
* Bug: In Kite, in GCellTopology::_do_xG_xM1_xM3(), infinite loop
while looking for the bigger N-E RoutingPad. Forgot to decrement
the index...
* Change: In Hurricane, in Plug::setNet(), more informative error messages.
* Change: In Hurricane, In Segment, more informative error messages.
* Change: In Hurricane, In DeepNet, accessor for the Net occurrence.
* Bug: In Katabatic, in AutoSegment::create(), error message uses correct
variables (vertical was using horizontal)...
* Change: In Kite, in BuildPowerRails, already existing wiring in instances
is copied up as blockage. Uses blockage layer instead of true layer
(it was a bug).
* Change: In Kite, in BuildPreRouted, consider as manual global routing
nets with only default wiring (default size wire & contacts).
Non-default routing is flagged as fixed (with the NetRoutingState
property).
Finally get rid of the demonic code from Wu Yifei...
* New: In Isobar, added encapsulation of Interval (don't know how have
forgotten it for so long).
* Change: In Isobar, In PyLayer, new PyLink_LayerDerived() function to
create/link the C++ object to the correct derived class and not the
base one (PyLayer) which then prevent to use the specialized methods.
Must replace PyLink_Layer() througout all the code.
* Change: In Isobar, in PyPoint the "setX()" & "setY()" methods where
still capitalized.
* Change: In Isobar, in PyQuery, complete the exportation of the C++
interface. remove the code belonging to a more "boost" way of
building the Python interface (will do that in a far future).
* New: In CRL Core, In PyAllianceFramework, export isPad() method.
* Change: In Unicorn, in unicornInit.py, protect the loading of each
single plugin by a "try" / "except" clause to the failing of one
plugins do not stop the loading of the next one.
Pass the same dictionnary argument to unicornHook() as for
ScripMain(), this is more uniform this way.
* New: In Cumulus, complete replacement of the chip placement scripts
from Wu Yifei (at last!). The clock-tree integration is still to
be done.
________________________________________________________________________
* New: In Isobar, export the DebugSession mechanism.
* New: In Kite, In KiteEngine, add the ability to run a Python script
(hook) after the initialization of the KiteEngine.
* Change: In Isobar, the Python interface was not exactly mirroring the
C++ one, now it is the case. The Python code should look likes almost
exactly like the C++ one, the only differences remaining being due
to the languages respective syntaxes. Note that in the case of
constructor functions, it leads to a slightly longer notation in
Python that it could have been (mimic the ".create()" static
member). Main modifications:
1. Mirror the static constructor syntax with create():
Cell( ... ) ==> Cell.create( ... )
2. Correct hierarchy for constants in Instance, Net, Pin
& Transformation. For example:
Hurricane.PlacementStatusFIXED
==> Hurricane.Instance.PlacementStatus.FIXED
Hurricane.OrientationID
==> Hurricane.Transformation.Orientation.ID
Hurricane.TypeLOGICAL ==> Hurricane.Net.Type.LOGICAL
Hurricane.DirectionIN ==> Hurricane.Net.Direction.IN
* Change: In CRL Core, correction to match the improved Python API
in the configutation helpers.
* Change: In Cumulus, correction to match the improved Python API.
* Change: In Stratus, correction to match the improved Python API.
* Change: In Documenation, update for the new Python interface
(both user's guide & examples).
* Note: We must port those changes into Chams for it to continue
to run.
* Change: In Documenation, update the Python script support part.
* New: In Hurricane, in CellViewer, create a simpler API to graft menu
and actions into the menubar. Mainly addToMenu() which take care of
the QAction creation but also locate the relevant QMenu, base on
the Qt object name. Regroup all the widget & action creation inside
the body of the constructor, this way almost all actions can be
removed from the attributes of the CellViewer.
addToMenu() is supplied in three flavors:
1. For C++ callbacks in GraphicToolEngines (with a binded
member function method).
2. For running Python scripts to be used by the plugin system.
3. To insert separator in menus (to give a more homogeneous
look).
Remove the last remnants of Stratus scripts (unificated with basic
Python scripts).
* New: In Hurricane, in PyCellViewer, export the interface to graft
Python scripts into the CellViewer menu tree.
* Change: In Etesian, in GraphicEtesianEngine, use the new API to
graft menus & callbacks into the CellViewer.
* Change: In Mauka, in GraphicMaukaEngine, use the new API to
graft menus & callbacks into the CellViewer.
* Change: In Kite, in GraphicKiteEngine, use the new API to
graft menus & callbacks into the CellViewer.
* New: In Cumulus, install Python scripts as plugins for Unicorn under
<PYTHON_SITE_PACKAGES>/cumulus/plugins/.
* New: In Unicorn, in UnicornGui, make uses of the new API for creating
menus in the CellViewer. Creates the stem menu for the P&R tools.
Add a Python initialization mechanism to read the plugins
installeds into <PYTHON_SITE_PACKAGES>/cumulus/plugins/.
- New: In PyDataBase, added method for getDB (the correct name, as alias)
and getRootLibrary().
- New: In PyComponent, added support for the optional BasicLayer argument
of getBoundingBox().
- New: In PyEntity, added support for conversion to/from RoutingPad.
- New: In PyHyperNet, added support for getNetOccurrences().
- New: In PyLibrary, added support for getLibrary().
- New: In NetExternalComponents, added support for setExternal().
- New: In hurricane/doc, added documentation RoutingPad, HyperNet & Query.
- New: In isobar, added support for RoutingPad.
- Change: In PyComponent, getCenter() method moved to it's right place in
the base class.
- Change: In PyPath, added duplicated methods (ApplyOn <-> applyOn and
Invert <-> invert).
- Change: In PyHurricane, add type object for all subtype of Component, then
we can use the Python "isinstance()" function to know the true type of a
component. Useful when looping over a collection of Component.
Name clash: We have used the class name as the name of the constructor
inside the Hurricane module, at a time we where less acquainted with
Python, so the real class are named 'PyVertical' for example, while
'Hurricane' is the constructor function. Should correct this in the
future but it's a huge work as all the Python scripts must be editeds...
- Change: In PyNet, adds the "getComponents()" Collection accessor.
- New: In Occurrence, added method getCompactString() to display a more
compact version of the occurrence.
- New: PyQuery & PyQueryMask expose the Query classe. Only partially implemented,
and with the start of the template based interface disabled.
- Bug: In PyHurricane, PyTypeViaLayer was *not* reference incremented, causing
the type to be desallocated when the Python interpreter was finalizing.
This was causing <isis> to fail.
- New: Added FreeBSD/Ubuntu patches from Otacilio De Araujo
(<otaciliodearaujo@gmail.com>).
* ./hurricane:
- Change: In CellViewer, one unificated method to lauch Python
scripts whatever they are Stratus or not.
- Change: In ScriptWidget, the function lauched is now
"ScriptMain()".
- New: In PyCellViewer, add the refresh method.
- A complete sweep of cleanup to suppress allmost all compiler warnings.
* ./hurricane/doc/hurricane:
- New: Documentation cleanup and update, particularly on the new Layer
derived classes.
* ./hurricane/src/hurricane,
./hurricane/src/isobar,
./hurricane/src/viewer:
- New: Creation of new methods, more explicit on DbU. Based on a to/from
naming scheme.
- New: Python support extented to include all objects needed to configure
through python scripts.
- Change: Finally understood what's causing the _XOPEN_SOURCE redefinition.
Basically the Python.h must be included first before any other
include. The type-puned problem will remains still (that is a Python
problem, not our own).
- Change: In DisplayStyle, uses shared_ptr for DrawingStyle instead of
custom made reference count.
- Change: New problem identified with the Python modules: each module seems
to be built as a complete binary, so all the static C++ initializers are
allocated in each module. In particular the C++ tree inheritance is built
for *each* module so we cannot longer uses the typeid() comparisons
across modules... It was used by boost::program_options to perform is
casts with boost::any and was starting throwing exceptions because of
bad casts. program_option was first initialized in "configuration"
first included by PyViewer then in PyCRL (see Utilities.cpp).
A first solution is to re-order the import of Python modules in
stratus1/st_model so that CRL is imported first.
The second is to not not link "configuration" with boost::program_option
as only the binary vlsisapd-conf-editor needs it.
That is a serious problem of which we must be aware and can cause further
strange behaviors.
Debug code used to diagnostic has been kept commented in the sources a
it may be needed again :-(
This behavior do not affect our singletons because they are part of
dynamic libraries that seems to be correctly shared between the various
Python modules.
- Bug: target_link_libraries() must be put back for OSX Snow Leopard
(doesn't seems to affect Leopard). As I do not have an OSX under
my hand it's untested and is likely to fail at that point.
* ./hurricane:
- Bug: In Instance, correct support for Instance::PlacementStatus::Code.
- New: NetExternalComponents python object wrapper, moves
getExternalComponents() from Hurricane module into that new object.
- New: Breakpoint python object wrapper, to allow stratus1 to stop each
times it calls the viewer.
- Change: In PyHurricane, UpdateSession is now a true object with static
methods.
- Change: In BreakpointWidget uses a local event loop mechanism that no
longer consumes 100% of a CPU while doing nothing... (copied from
Qt's sources of QDialog).
- export MousePositionWidget.h so pharos can use it (displays the (x,y) mouse position in status bar)
ADDS
- add a getOnPhysicalGrid() in DbU
- add getPhysical and getOnPhysicalGrid functions in PyDbU and also defines useful CONSTANTS
I rewrited everything like it was in Coriolis-1 (PyType_create) and reuse the precedent hierarchical system (PyTypeInheritedObjectDefinition)
With all these changes Pharos is able to run the same script several times without any error (and not only 7 times before crash)
Maybe there are still some bugs but it seems ok for the moment :D.
does not throw Error anymore but cerr and return
this way it is possible to execute python script more than one time
Adding trace information for DirectDeleteMethod
deprecated conversion from string constant to char*
still one occurrence of this warning, but I don't know how to treat
it between C++ and Python C API.
Jean-Paul Chaput
Damien Dupuis