* New: In Anabatic::Edge::ripup(), sort edges to ripup by decreasing
length so the longest gets riped up first.
In two metals mode, ripup all segments *except* those who have
terminal contact in the GCell, because they must use it anyway.
* Bug: In Anabatic::GCell::getEdgeAt(), the size hint flag was not
correctly selected, leading to the use of an edge in the wrong
side. So deleted segments where not deleted from their edges,
leading to core dump. Don't understand how it can have not shown
until now.
* New: In KatanaEngine::annotateGlobalGraph(), for two metal gauges,
decrease the edge capacity on both north and south side for each
terminal in the GCell. As a terminal must be accessed through
north or south it blocks the whole vertical track (hence both
edges).
* New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary
workaround for a Hurricane problems. When an instance is moved, the
RoutingPads that use it must be moved accordingly, but they are not
invalidated so they stay in the wrong QuadTree.
New method ::_resizeMatrix() to be called when the associated Cell
is resized.
* Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(),
the *target* constraints where never merged.
* Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(),
now return a boolean to tell if it was ok (must not encounter a NULL
GCell while progessing from source to target).
* New: In Anabatic::Configuration and Anabatic:Session, create new methods:
- getDHorizontalLayer()
- getDhorizontalDepth()
- getDHorizontalWidth()
- getDHorizontalPitch()
And so on for Vertical and Contact.
They supply depth-independant informations about the H/V layers to
build the initial detailed routing.
The AutoSegment::create() methods have been modificated accordingly.
* New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow"
for implementing 2-Metal blocks.
Rename the GCell::setXY() method in GCell::setSouthWestCorner(),
move the contents of GCell::updateContactsPosition() into it and
suppress it.
WARNING: In case of a GCell shrink this may cause problems. But for
now we only expand...
New method GCell::getNetCount() to count the number of Net going
though the GCell.
* Change: In Anabatic::Edge, add specific support for capacity of 2-Metal
routing channels.
* Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()"
calls by "not gcell->isAnalog()". Add more check so that the methods
pertaining to the analog routing (GRData) are not called in digital
mode.
* New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific
cases. That is, always break in case of vertical pass-through or
U-turn. The global routing must always be broken in H-Channel.
* New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism
to ensure the revalidation. The "::revalidate()" method is then moved
as "::materialize()" (overload of Go) and "::_invalidate()" becomes
"::invalidate()"
* Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX.
* New: In GCellTopology, added support for building 2-Metal topologies.
* ForkStack is now an object attribute as many methods do need it.
* To push segments/hook on the stack, a new method "push()" is
available. Perform NULL and fromHook checking. Can also setup
_southWestContact or _northEastContact if it is the "from" edge.
* N/S/E/W edges are now vector as in digital channel mode there
can be more than one.
* Added build topological build methods:
- doRp_2m_Access() RoutingPad stem access.
- _do_2m_1G_1M1() North or south access.
- _do_2m_2G_1M1() North AND south access.
- _do_2m_xG() H-Channel routing.
* New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds.
* New: In Anabatic::Vertex, new static method ::getValueString() for a
friendly text rendering.
* New: In Katana::DigitalDistance, support for channel routing.
* Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(),
for channel routing, calls to setupPowerRails() and
protectRoutingPads() must be called after the core block has
been fully dimensionned.
::runGlobalrouter() contains the code tasked with the grid creation
and channel sizing.
* New: In KatanaEngine: Added support for core block, for 2-Metal routing.
May be expanded for over-the-cell routing in the future.
Added methods :
- isDigitalMode()
- isAnalogMode()
- isMixedMode()
- isChannelMode()
- getBlock() / addBlock()
- setupChannelMode()
- createChannel()
* New: In Katana, new class Block to manage core blocks and perform
channel routing.
* New: In Katana::Session, new convenience method "isOpen()".
* Bug: In Anabatic::GCell, new functions getConstraintUMax() to return the
correct bounding box for the last north/east GCell. The GCells do not
own their north/east edges, except for the last ones. Thoses functions
must distinct from getUMax() because for them, the shrink is always
applied. getConstraintBox() uses the "getConstraintUMax()" functions.
* Bug: In Anabatic::AutoContact, initialize the constraint box from the
new GCell::getConstraintUMax(), to manage correctly the boundaries
of the nothernmost & easternmost GCells. The problem was showing for
pins on the north/east side of a circuit, the constraint
* Bug: In Anabatic::AutoContactHTee, Anabatic::AutoContactVTee and
Anabatic::AutoContactTerminal forgot to call the _preCreate() function
in the various create().
* Bug: In Matrix::getUnder(), if on the N/E boundary, decrease by one to
be enclosed in it.
- Modified: Matrix is now correctly updated for irregular floorplans.
Dijkstra:
- Modified: Source and Target contacts are now correctly chosen in _materialize.
* Change: In Anabatic:
- Long wires, going straight accross multiple GCells were splitted
into a long sequence of segment+contact, one for each gone-through
GCell. It was memory-consuming and algorithmically inefficient.
Now there is only one straight wire.
As a consequence, Edges now store the list of all segments
going through them. That way we do not need to load a Net into
Dijkstra before riping up some of it's segment. The ripup mechanims
can now be implemented right at AnabaticEngine level, without
dependencies over Dijkstra. Note that long wires are automatically
broken in two if we need to attach a new branch on it (breakAt()).
And fused back into one if a branch is removed (unify()).
* Bug: In Anabatic:
- In _propagate(), on reaching a target, forgot to remove it from
the queue before pushing it back with the new distance. It also
simplificate the core algorithm as target as treated normal nodes.
* New: In Anabatic:
- Update cdebug to use the fastest macro version.
- More readable drawings of GCells and Edges.
- Added timer support.
- The distance is now computed in DbU::Unit (aka long) and not in
normalized float.
- The distance function is now a callback (std::function<>) that
can be changed (a default is provided at initialization).
- New concept of branch in the agglomerated connex component.
Each trace back part create a "branch" (tagged with a "branchId").
When a node is reached with the same distance, but from two
different branches, choose the the branch that was lastly created.
This create a slightly different tree which grows outward from
the newest branches.
- Makes the horizontal edges *slightly* longer than the vertical ones
to skew the tree to use vertical edges, as it is usually less
congested than the horiontal one (due to metal1 cell terminals).
It is also my understanding that it is useful to reduce the
number of vias, whithout introducing a via cost.
* New: In Bootstrap:
- Script sprof.py to perform sprof & demangle libraries execution
profile.
* ToDo: In Anabatic:
- Corner optimization. Sometimes when two corners are possible, the
wrong one is choosen. That is, one of it's edge cannot be used for
further grow of the tree.
* Bug: In Anabatic:
- In Dijktra::load(), do not create Contact while looping over the Net's
components (for RoutingPads).
- In Dijkstra::propagate(), reset the connexId of reached Vertexes
on updating the stamp to avoid using connexId from previous runs.
Push the vertexes on the queue while backtracking (with a distance
of 0.0). Do not reset the "_from" as we need it in Dijkstra::toWires()
to know how were the routing is.
- In Edge::getDistance(), convert to float more early so the normalisation
do not always end up in zero.
- In GCell::_add(), when the axis of the new edge is equal to one already
on the given side, adds it *after* the existing edge and not before.
(to be coherent with the way GCells are split in two)
- In GCell::hcut() and GCell::vcut(), create an Edge if is equal to X/Y Max,
*but* the new chunk is flat. The new chunk is then expected to expand
"below".
- In GraphicsAnabaticEngine::drawGCell(), display the id of the GCell in
a small box at the center of it's bounding box. Nothing displayed for
flat GCells, to avoid cluttering.
* Bug: In Anabatic:
- In Dijkstra/Vertex, use the new Observer for fast access from the GCells.
- In Dijktra::propagate() loop detection.
- In Dijkstra, reset the "_from" of vertexes between two propagates on
the same Net (otherwise: loops...).
- In Matrix, there must be two different way of calculating an index from
a position. One for the min, which is rounded to superior. And one for
the max which is rounded to inferior.
- In Matrix::updateArea(), checks for invalid indexes.
* Change: In Hurricane, in CellWidget, enable the drawing of ExtensionGos
according to the the threshold paramaters (as layers do).
* Change: In CRL Core, provide DrawingStyle for Anabatic::GCell &
Anabatic::Edge. Use the exact name of the ExtensionGo.
In kite.conf, add settings for the size of an edge as the optimal
size may change between analog & digital designs.
* New: In Anabatic:
- Support for fast position query using a matrix.
- Computation of the Edge capacity, based on the routing gauge parameters.
- Graphic display of the edges capacity. Added configuration
parameters to size the bounding box of an Edge.
* Bug: In Anabatic:
- GCell::_moveEdges was both too complex (some cases never arise the
way we divide GCells) and bugged.
Jean-Paul Chaput
EricLaoGitHub