- Change: In RoutingEvent::State::conflictSolve1_v1b(), when finding obstacles
in candidates tracks, no longer ignore blockages (segments from pads that
connot be broken because they see *no* conflicts...).
- New: In NegociateWindow/RoutingEvent, adds a more comprehensive stage
"Repair". Perform in three stage: first try to place with a relaxed
constraint (one GCell on each side). Second try to minimize the faulty
segment. Third perform another "repack perpandicular" but this time
the faulty segment is re-inserted *before* any of it's perpandiculars.
- New: In RoutingEvent::cacheAxisHint(), when a segment has a parent, that
is comes for a "moveUp()", uses the parent axis hint as it's own.
- New: In State::slackenTopology(), in the global FSM, adds a special
operation when reaching MaximumSlack: forceOverLocals(), try to insert
the global on track containing only local segments. Should tend to
concentrate locals on a small set of shared tracks. Most useful on the
highest layers.
- New: In State::slackenTopology(), in the "MoveUp" state, try to find the
more appropriate segment to move up (Manipulator::desaturate()).
Effectively move up the longest segment fully enclosing the one we are
processing.
- New: In State::slackenTopology(), add a check for fully blocked segments
in the local segment FSM. Calls State::solveFullBlocked().
- New: In KiteEngine::createGlobalGraph(), decrease the vertical capacity
of one track inside the core. Helps smooth the vertical density.
- Change: In Manipulator::insertInTrack(), when a track is freed for a
to be inserted changes the priorities so that the segment is immediatly
inserted. Parallels ripeds and theirs perpandiculars are replaced
only *after*. This is the opposite of the previous behavior.
- Change: In NegociateWindow::NegociateOverlapCost(), account the costs
of terminals only for deep depth layers (M1, M2 & M3).
- Change: In RoutingEvent::insertInTrack(), expand the excluded interval
by a half-pitch (2.5l) instead of one lambda.
- Change: In State::State(), do not uses DiscardGlobal if the ripup count
exceed 5. Case of the "Strap" segments that can be ripped a lot
before changing state.
- Change: In State::_processNegociate(), no longer lock into position
(fixed) the local terminal segments as a last resort.
- Change: In RoutingEvent::_processNegociate(), no longer ripup perpandiculars
when a segment is inserted in a free space. Reduce the number of
events whithout degrading the routing quality.
- Change: In State::conflictSolve1_v1b(), if getLongestConflict() is nul,
ignore the track, the conflict must occurs on another track.
- Change: In TrackCost, add a flag support. First uses, a flags to prevent
a local of the topmost layer to ripup a global which is in moveUp
state.
- Bug: In State::solveFullBlockage(), after have been freed, reset the
segment state to "moveUp".
- Bug: In manipulator::minimize(), the axisHint was miscalculated if the
punctual span was empty.
- New: In RoutingEvent, while routing a full chip, transient full blockages
may happens due to the initial position of some perpandiculars on theirs
optimal positions. Check for it and perform a "ripupPerpandicular" with
the perpandiculars re-routed first (on normal operation, this is the
reverse).
- Change: In NegociateWindow::NegociateOverlapCost(), do not account terminals
if the layer is *above* METAL3 as it is unlikely that it's truly directly
connected to a terminal (true at least for our designs).
- Change: In RoutingEvent::State, add a "fullBlocked" flag to perform the
full blockage direction while building the state object.
- Change: In RoutingEvent::cacheAxisHint(), when the TrackSegment has parent,
uses the parent current axis position and not it's axis hint.
- Change: In Manipulator::insertInTrack(), when the overlapped segment is a
Local and is completly enclosed (shrinkLeft & shrinkRight), no longer
rip it up but force a shrink left/right instead.
- Bug: In RoutingEvent, the event sorting function was sorting in the *wrong*
order! The less prioritary first! With the correct sort, we won an
additionnal 30% in speed (total: 69%). From the "reference" time we have
a 3.2 speed-up. And we can successfully process denser designs...
- New: In BuildPowerRails, special processing for the power ring segments.
The "diagonal" of vias at each corner is causing a misbehavior of the
routing algorithm (due to fully saturated GCells in one direction).
As a temporary fix, extend the segments so they form a "square corner".
(problem arise on "d_in_i(22)").
- New: In RoutingEvent::_processNegociate, disable the "isForcedToHint()"
feature. No noticeable loss of quality or speed.
- New: In TrackElement/TrackSegment, wraps the AutoSegment parent's mechanism.
Allows to gets the DataNegociate of either the segment or it's parent.
- New: State::solveFullBlockages(), dedicated method to solves the case when
all the allowed tracks of a segment are blocked, tries to moves up
local segments and to break-up global ones.
- New: RoutingEventLoop, a more sophisticated way to detect looping.
Maintain a dynamic histogram of the last N (default 10) segments routeds,
with the count of how many times they have occurred. If that count
exeed 40, we *may* be facing a loop.
- Change: In State::conflictSolve1, implement new policy. The global segments
no more can be broken by local ones. The idea behind is that breaking
a global on the request of a local will only produce more cluttering
in the GCell. Globals must be keep straigth pass through, especially
inside near-saturated GCells. Globals breaking however can occurs at
another global's request.
- Change: In TrackCost, implement the new policy about locals segments that
cannot break globals segments. The sorting class now accept flags to
modulate the sorting function. Two options avalaibles: IgnoreAxisWeigth
(to uses for strap segments) and DiscardGlobals (to uses with locals).
- Change: In TrackCost, the "distance to fixed" have now an upper bound of
50 lambdas (no need to be greater because it means it's outside the
begin & en GCells). Take account not only of fixed segment, but also
of placed segments which makes bound.
- Bug: In Track::_check(), while calling each individual TrackSegment check,
uses it as the *first* argument of the "or", otherwise it may not be
called.
- Bug: In ProtectRoutingPad, loop over segment Collections while modificating
it was producing non-deterministic results. The fact that a collection
must be not modificated while beeing iterated is becoming a more and more
painful problem.
- Change: Big cleanup. Supress all the GCell level: GCell, GCellGrid,
GCellRoutingSet. Blockages now managed inside the BuildPower.
- New: In NegociateWindow, Histogram of GCell densities in Gnuplot
format.
- Change: Propagate renaming "obstacle" -> "blockage".
- Bug/Change: In Configuration, the value of the extensionCap was too big
(1.5 lambda), reduce to 0.5 lambda. This is a problem, the extension
should be coupled to the layer as it is not the same for each METAL.
- Bug: When using TrackElement, always uses the virtual "->isFixed()" method
instead of trying to access to "->base()->isFixed()" as the base may be
NULL in case of blockage/fixed segment.
- Change: Merge PowerRails & Blockage trans-hierarchical construction (into
PowerRails). All blockages are groupeds under "blockagenet".
Allows to remove TrackBlockage & BuildBlockages.
- Change: In KiteEngine::annotateGloblalGraph(), when routing a full chip,
ring power segments around the core must completly saturate the edges
in their segment direction. This is to prevent the global router to
use paths under the power/ground ring (may generate unsolvable configs).
- Change: In KiteEngine::annotateGloblalGraph(), when routing a full chip,
distinguish three areas: the core (65%), the corona (90%) and the pads
(100%). Capacities on the edges are sets accordingly.
- Change: In RoutingEvent, introduce an alternative algorithm for
conflictSolve1, FindPath which try to deduce the breakpoints from a
truly explorated path. Unfortunatly this gives worst results than the
Cs1Candidates method. The why should be investigated as it's a critical
point in the algorithm.
- Change: In Manipulator::ripupPerpandicular(), when a caged perpandicular
is encountered, instead of just "stopping", rip it up and change is
axis hint (actually increase) it's axis hint so it stands a chance to
go outside the track with an obstacle.
- Change: In RoutingEvent/State::slackenTopology(), allow move up of local
segments when they are tightly constrained *and* blocked (cageds).
Partial modification of functions calls from booleans to flags.
- Bug: In NegociateWindow::NegociateOverlapCost, check for fixed segments
before trying to get DataNegociate. The lack of DataNegociate cause the
TrackElement to be discarted. It's a failsafe behavior, but it leads to
overlaps.
- Bug: In ProtectRoutingPad, in Pad Cells only, *do not* protect RoutingPad
to avoid the edge capacity over the pad to decrease to zero. This is
due to unused RoutingPads being accounted as blockages.
- New: In BuilPowerRails & BuildBlockage, specific support for chip-level
design. The Alliance "top chip" design hierarchical structure is
hard-coded. Top level POWER/GROUND/CLOCK nets must always have the
<vsse>, <vdde>, <ck>, <vssi>, <vddi>, <ckc>, <cki> names.
Specific method to get trans-hierarchical root nets, espcially in
case of global ones (POWER/GROUND). Clock is *not* global.
Some correction in the manner obscured tracks are computeds.
- New: ProtectRoutingPad module that perform a more clean work for protecting
unused RoutingPad.
- Bug: In BuildPowerRails, uses stable_sort<> instead of sort<>, which
causes unexplained core dumps (seems to try to perform a comparison
using the "end" pseudo element). Already occured in Knik, no explanation
other than a STL bug.
- Change: Slight changes in the weights to move up. Now needs a full empty
track instead of a half one.
- New: In Configuration & RoutingEvent, adds support for minimal break length
by layer (METAL1 through METAL7).
- New: Added measures for final detailed wirelength, wirelength expansion ratio,
failed wirelength, number of processeds events and number of unique events.
./metis,
./mauka,
./katabatic,
./kite :
- Change: switch toward the XML configuration system. Suppress the need
of a default static configuration (now built on demand from the XML
database).
In Mauka and Kite, suppress the ConfigurationWidget, wich are
obsoleted by the generic XML configuration widget.
- New: Adds support to restrict the number of routing layers. Not enabled yet
because the router needs some more tweak if using only two routing layers.
- Change: In Configuration, sets the default expandStep parameter to
0.99 (gives better results).
- Change: In KiteEngine::_computeCagedConstraints(), detect and build
a list of segments on which caged constraints are incompatibles
(tearing effect shown in ieee_division). All caged constraints
functions are modificated accordingly.
- Change: In Session::_revalidate(), makes doglegs on Segment with
incompatible caged constraints.
- Mark: vld & ieee_division works.
- Bug: In top CMakeLists.txt the SETUP_PROJECT_PATHS was not inserting
X_USER_TOP *before* X_TOP, thus potentially allowing an obsolete
system-wide configuration to shadow an up-to-date local one.
* ./kite:
- Change: In Configuration/KiteEngine, propagate changes in Configuration
in Kite. Note that a *second* singleton is created at Kite level.
- New: KiteEngine::printConfiguration() method to allow quick checks of
the router's main parameters.
- New: ConfigurationWidget to display/sets all the revelant Katabatic/
Kite configuration parameters. To be used with the TabSettings from
the ControllerWidget.
The ConfigurationWidget is bound to the default (static) Kite
configuration, as once it has been run you obviously cannot change the
router's settings.
- Change: In TrackFixedSegment, when the source/target coordinates of the
fixed segment are outside the grid (i.e. the Cell Abutment Box) truncate
them.
- Change: In GCell::addTrackSegment, when looking for overlap between the
to be inserted TrackSegment and Blockage segment, shrink the Blockage
span by one DbU to avoid false overlap when they are just edges connexes.
- Bug: In RoutingEvent::slackenTopology, in the local segment FSM, looping
on the MaximumSlack state. Now also checks the state count.
- Change: In TrackSegment::canMoveUp() & canPivotUp() adds the "reserve"
parameter and uses it in RoutingEvent to prevent over saturated GCells.
- Change: In Configuration, parameters adjustements: expandStep increased to
0.40. Makes RoutingSets biggers but no noticeable slow down.
- Bug: In RoutingEvent::Manipulator::forceToTrack(), wrong return code,
was always return true, blocking the explorations of least good
Track.
- Bug: In RoutingEvent::_processNegociate(), must reset the "insert state"
while looping on candidate. This bug was having the same effect as
(and masking) the previous one!
- Bug: In TrackSegment::moveUp(), reset the ripup count after the move
up...
- Change: At various DebugSession opening points, sets the debug level to
200 to avoid extraneous debugging output.
- New: KiteEngine::dumpMeasures() to create a data file for later uses
by gnuplot. In interactive mode, this function is called in the
"finalize layout" stage.
- New: Adds measurments "algo", "fin" & "Segs".
./coriolis/src/crlcore,
./coriolis/src/knik,
./coriolis/src/katabatic,
./coriolis/src/kite,
./coriolis/src/equinox,
./coriolis/src/solstice,
./coriolis/src/ispd:
- SVN MOVE: Source tree simplification & uniformisation. Now all tools
are at the same level, directly under the root of the repository.
No more "coriolis/src".
Jean-Paul Chaput