* Change: In Hurricane, the NetRoutingProperty is moved into Hurricane
from Katabatic. Needed for Knik to be able to access thoses
informations.
* Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in
case of identical area, select the component of lowest id.
This should not be needed if the component ordering was fully
deterministic as it should be (will investigate later).
This is to ensure that the choosen component is always the
same, especially between save/load of a global routing.
* Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate
the segments only if the topology is valid (no NULL in the
cached segments).
* Bug: In Katabatic, in GCellTopology::construct(), throw an error
if the topology is bad instead of trying to continue (and core
dump later... ).
* Bug: In Kite, in BuildPowerRails, distinguish the name of the master
net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the
name of the net in the *chip* netlist. Must use the later to make
comparison as they may differs.
* Change: In Knik, in save/load solution, exclude nets that are not
globally routed by Knik. That is which NetRoutingProperty is not
*Automatic*.
* Bug: In Cumulus, in chip.BlockPower take account of the layer
width extention to sligthy shrink the connector thus avoiding a
notch with standart cell in some cases.
* Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner
trees for the leaf clocks, as it seems overconstrained for the
router. First move was to lower them in M2/M3 (instead of M3/M4)
but that was not sufficent.
* New: In Cumulus, RSavePlugin for recursively saving a physical
hierarchy.
* New: In documentation, first embryo for RDS file. Should have been
in Alliance git, but I prefer to keep newest doc in Coriolis.
* Change: In bootstrap, in ccb & builder, build by default with Qt4 and
provide a --qt5 command line switch to enable Qt5.
FindBootstrap.cmake now provides a qtX_wrap_cpp() macros to be
independant of the version of Qt being used.
Add all thoses options to the graphical interface to the builder.
* Change: In all the tools using Qt, switch to the qtX_*() macros from
FindBootstrap.cmake.
* Change: In Hurricane, in CellViewer, revert to the Qt4 way of connecting
signal/slots for backward compatibility.
* New: In Katabatic, add the ability to decorate some (i.e. few) nets
with a state that indicate to Katabatic & Kite what to do with it.
The possible states are:
1. Fixed : all the wire are in fixed positions. The router cannot
move them and account them as obstacles.
2. ManualGlobalRoute : a user-defined topology is supplied. The
wires still have to be detailed route in "Detailed Pre-Route"
but will be skipped for the global routing and fixed for the
general Detailed route.
3. AutomaticGlobalRoute : ordinary nets, to be global routed then
detail routed.
4. Excluded : do not try to global or detail route thoses nets.
5. MixedPreRoute : mask combining Fixed and ManualGlobalRoute.
Not all nets have this property, only those that needs a special
processing.
To ease the access to the state, it is nested inside a
PrivateProperty in the net (NetRoutingProperty), with an extension
access class (NetRoutingExtension).
* New: In Kite, take account of NetRoutingState. Pointers to the
net's states are strored inside an internal map for faster access.
The property is *not* deleted when Kite is destroyed. The property
will remains until the Net itself is destroyed.
As a consequence, the lists that where passed to high level
function are removed as the information can now be accessed directly
through the net NetRoutingProperty.
* New: In Unicorn, in CgtMain, comply with the update interface.
* New: In documentation, update the User's Guide to explain the Pre-routed
step of Kite.
Update to Qt 5:
* Change: Now requires at least cmake 2.8.9.
* Change: CMakeLists.txt needs small changes. Qt modules must be found
one by one (Core, Gui, Widgets). Must add "set(CMAKE_AUTOMOC ON)"
in the top file and replace "qt4" prefix in macros by "qt5".
Added simpler macro "setup_qt()" in FindBootstrap.cmake.
* Change: No longer need to include <QGtkStyle> is is choosen by default
according to the current desktop environment.
* Change: In <hurricane>, In HApplication, launch ExceptionWidget when
a std::exception is catched instead of silently discarting it.
New placer Tool: Etesian
* New: <etesian> analytical placer. Encapsulate Coloquinte from
Gabriel Gouvine.
* New: in <documentation>, add stub demonstration ToolEngine <smurf>.
Needs to be commented.
Miscellaneous:
* New: in <boostrap> and <unicorn>, added support for Etesian, the new
analytic placer. The tool itself will be added in the next commit.
* Bug: in <CellWidget>, when shifting the display buffer, we no longer
can copy the buffer on itself (we should never have). Now go through
a temporary one (PlaneId::AutoCopy) which is added to the
DrawingPlanes. Affect "goLeft()" and "goUp()".
* Bug: In <CellWidget>, remove the WA_PaintOnScreen flag/attribute.
When it's on, no PaintEvent is transmitted to the CellWidget
when it's the central widget of the <CellViewer> (QMainWindow).
It's something I still don't understand from the doc of Qt.
* Change: In <AreaCommand>, use the PlaneId enumeration instead of a
anonymous numerical index.
* Change: In <HApplication>, no longer catch and silently discard
standartd exceptions but launch the ExceptionWidget...
Suppress the now deprecated constructor with "Type" argument.
* Change: In <SelectionModel>, the "reset()" method is deprecated in
Qt5, instead enclose the "clear()" by a "beginResetModel()" and
"endResetModel()" pair.
* New: In <crlcore>, add support for ISPD05 benchmarks (in Bookshelf
format). Forked from ISPD04 and not finished yet.
* Change: In <Mauka>, distinguish the Action string identifier from
<Etesian>
* New: In <unicorn>, add entry for ISPD05 loader. Add entry for
<Etesian> analytic placer.
- New: ChipTools, regroup all datas and utilities to manage a full-chip
design.
- Change: In LoadGrByNet/GCellConfiguration::_GCell_xG_1Pad(), uses straight
perpandicular wires on top & right pads. The GCells under those connectors
are fully saturated, wires must go out as straight as possible.
- Change: In AutoHorizontal/AutoVertical, update the "terminal" flag after
slackening. This is to avoid global that are no longer connected to
terminals behave as such.
- Change: In AutoSegment::canMoveUp() & canPivotUp(), prevent all local segments
to go up. This is to avoid cluttering upper levels with small segments.
- Change: In GCellConfiguration, for xG_xL3, detect straight vertical topologies
and for them to be fixed (new flag FIXED_GLOBAL set by the topological
builder instead of the constructor). This prevent the router to do
stupid things...
To sets the "Fixed" flag *after* the axis of global segments have been
positionned correctly adds a "_toFixGlobals" static table lookup.
- Change: In GCell::stepDesaturate(), if less than one free track remains in
the upper layer, do not move up the segment. This allows from a minimum
free room for expansion.
- Change: In GCell::_getString(), display indexes and layer names in various
saturation tables.
- Change: In AutoSegment, allow move up of local Segment. ::moveUp() and
::canMoveUp() arguments go from booleans to flags, which are more
explicits.
- Change: In loadGlobalRouting(), more exlicit message as to why a net is
filtered out the routing set (POWER, GROUND, CLOCK or BLOCKAGE).
- New: ChipTool, module with utilities specific to chip routing. Containing
a function to pre-break wires around a block.
- New: In loadGlobalRouting/GCellConfiguration, adds supports for RoutingPad
connected on chip's pad.
- New: In GCellGrid/GCell, can compute the density in three modes: average,
max of H/V and max of layer. Currently implemented in getMaxHVDensity(),
should be unificated with getDensity(). Used for display purposes.
- Bug: In AutoContact, when splitting a contact, add a specific check for
"one layer span".
- Bug: In AutoSegment::canMoveUp(), do not move up fixed segments.
- Bug: target_link_libraries() must be put back for OSX Snow Leopard
(doesn't seems to affect Leopard). As I do not have an OSX under
my hand it's untested and is likely to fail at that point.
- Library linking: there must not be "target_link_library()" for libraries,
only when building binaries. Avoid clashes between static module
or class variables, and strange reinitialisation of those variables.
- Change: Boost is now always linked staticly.
./metis,
./mauka,
./katabatic,
./kite :
- Change: switch toward the XML configuration system. Suppress the need
of a default static configuration (now built on demand from the XML
database).
In Mauka and Kite, suppress the ConfigurationWidget, wich are
obsoleted by the generic XML configuration widget.
- Change: adopt a tree layout compliant with the UNIX FHS.
* includes under TOP/include/coriolis2.
* shared datas under TOP/shared/coriolis2.
* docs under TOP/share/doc/coriolis2.
* configuration under TOP/etc/coriolis2
* ./crlcore:
- Change: In Environment, comply to the new tree layout, search configuration
files under TOP/etc/coriolis2/.
* ./knik:
- Change: In flute, comply to the new tree layout, get the "POW*.dat" files
from TOP/share/coriolis2/flute-2.4.
libraries gets installed in "lib64" instead of "lib".
buildCoriolis.py sets automatically LIB_SUFFIX for cmake.
coriolis2.spec modificated to uses lib64 on 64 bits.
- Change: In the CMakeLists.txt, in all the install commands remove all
the leading "/" as they prevents the CMAKE_INSTALL_PREFIX to be took
into account. It was nevertheless working because buildCoriolis.py was
using DESTDIR which is prepended anyway.
* ./goodies:
- Change: In buildCoriolis.py, no longer uses the DESTDIR but instead
CMAKE_INSTALL_PREFIX.
./coriolis/src/crlcore,
./coriolis/src/knik,
./coriolis/src/katabatic,
./coriolis/src/kite,
./coriolis/src/equinox,
./coriolis/src/solstice,
./coriolis/src/ispd:
- SVN MOVE: Source tree simplification & uniformisation. Now all tools
are at the same level, directly under the root of the repository.
No more "coriolis/src".
Jean-Paul Chaput
Sophie Belloeil