* Change: In Hurricane, the NetRoutingProperty is moved into Hurricane
from Katabatic. Needed for Knik to be able to access thoses
informations.
* Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in
case of identical area, select the component of lowest id.
This should not be needed if the component ordering was fully
deterministic as it should be (will investigate later).
This is to ensure that the choosen component is always the
same, especially between save/load of a global routing.
* Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate
the segments only if the topology is valid (no NULL in the
cached segments).
* Bug: In Katabatic, in GCellTopology::construct(), throw an error
if the topology is bad instead of trying to continue (and core
dump later... ).
* Bug: In Kite, in BuildPowerRails, distinguish the name of the master
net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the
name of the net in the *chip* netlist. Must use the later to make
comparison as they may differs.
* Change: In Knik, in save/load solution, exclude nets that are not
globally routed by Knik. That is which NetRoutingProperty is not
*Automatic*.
* Bug: In Cumulus, in chip.BlockPower take account of the layer
width extention to sligthy shrink the connector thus avoiding a
notch with standart cell in some cases.
* Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner
trees for the leaf clocks, as it seems overconstrained for the
router. First move was to lower them in M2/M3 (instead of M3/M4)
but that was not sufficent.
* New: In Cumulus, RSavePlugin for recursively saving a physical
hierarchy.
* New: In documentation, first embryo for RDS file. Should have been
in Alliance git, but I prefer to keep newest doc in Coriolis.
* New: In Katabatic, in <AutoContact>, this class is no longer derived
from ExtentionGo. With the simplificated AutoContacts, there is no
reason to do so, and it will save some QuadTree insertions/deletions.
New factory function AutoContact::createFrom(Contact*) which try to
build an AutoContact on top of a Hurricane::Contact. Of course that
base contact *must fit* into one of the predefined Contact
configurations (Terminal, Turn, HTee or VTee).
NOTE: This implies that the pre-routed segments & contacts *are*
correctly articulated, which is not the case when a Cell is read
from disk in "ap" format. The pre-routing feature must be used for
now without any re-read from disk. We will implement a re-articulating
pre-process in the future.
* Change: In Katabatic, in <AutoContact> derived classes, the ::updateCache()
method now display an accurate error message if a segment is connected
but has no AutoSegment conterpart (i.e. the lookup fails).
* New: In Katabatic, in <AutoSegment>, the ::computeOptimal() method is
short-circuited for pre-routed segments, the optimal axis position is
considered to be the one it is currently on (i.e. we trust the designer).
* New: In Katabatic, in <KatabaticEngine>, the ::loadGlobalRouting()
method now accept a map of excluded nets (same as Knik). This map is
the one of pre-routed nets.
* New: In Katabatic, in layer assignment, do not try to displace fixed
segments...
* New: In Katabatic, in <AutoSegment>, new flag SegUserDefined and related
methods to know if a segment comes from the global router (Knik) or
is pre-routed (supplied by the user).
* New: In Kite, In <BuildPowerRails>, support (exclusion) for pre-routed
nets.
* New: In Kite, In <GraphicKiteEngine> new menu entry for running the
router on pre-routed nets ("Detailed Pre-Route"), also integrated
in the all-on-one route command.
* New: In Kite, In KiteEngine, new method ::_initDataBase() that group
all the initialisation steps. It is a mix of calls between Knik and
Kite initializations which are intertwinneds (may have to devellop
a shared common base at a later point). It creates the Knik grid,
then the Katabatic grid, then load pre-routed wires and power rails
and protect isolated RoutingPads.
Add support for a map of pre-routed nets (to be excluded for
Knik calls).
The method "::run()" now uses function flags, firstly to know if
it is managing pre-routed wires or general purposes ones.
* New: In Kite, in <NegociateWindow>, the "::run()" methods has now two
modes. The normal one and the 'KtPreRoutedStage' that is for routing
pre-routed nets. When in pre-route stage, the wires are fixed at the
end of this step.
* New: In Kite, in <TrackElement> add decorator for AutoSegment
isUsedDefined().
* New: In Kite, in <TrackSegment>, the various ::canDogleg() methods
returns false for a pre-routed (user-defined segment).
* New: In Kite, in PyKiteEngine, added new method runNegociatePreRouted().
In Katabatic & Kite, remove all hard-coded values related to track pitches.
* New: In <Session>, add more convenience function to access RoutingGauge
characteristics.
* New: In <AutoSegment>, <AutoContact>, add support for the "depth spin",
that is, if the source/target contacts are going "top" or "down".
Used to compute the perpandicular pitch. Need a small modification
of the revalidation mechanism. The observers of <AutoSegment> are
notified when the spin changes.
* New: In <AutoSegment>, the getPPitch() method allow to compute the
"perpandicular pitch". For now it is simply the greatest from the
source perpandicular pitch and the target perpandicular pitch.
Make uses of the "depth spin".
* New: In <TrackElement>, <TrackSegment>, cache the perpandicular pitch.
Updated through the notification from the observable.
Miscellaneous:
* Change: In <crlcore>, in display.conf use the same display threshold
for both METAL2 & METAL3.
In alliance.conf, the side of VIAs in the gauge is 2l (not 3l).
In kite.conf, separate edge densities for H/V.
* Change: In <Cell>, in flattenNets() use flag as argument, not a
boolean. Do not create rings for clock or supply nets.
* Change: In <DeepNet>, in _createRoutingPads() do not create rings
for clock or supply net (duplicated policy as in Cell::flattenNets()).
* Bug: In <ControllerWidget>, at last find the bad signal disconnect
that was causing ungraceful messages.
* Change: In <knik>, in Edge display occupancy/capacity in the string
name. Improved display progress and debugging capabilities.
Improved exception catch & breakpoint managment:
* Bug: In <PaletteWidget>, in updateExtensions() replace the calls to
deleteLayer() by delete. This cause the widget to be immediatly
erased instead of waiting for the event queue to be completly
processed. This was causing the widget to be left in a incoherent
state when stoping at a breakpoint.
* Bug: In <BreakpointWidget>, in execNoModal(), flush the main event
loop (QApplication::flush()) *before* lauching the *local* event
loop. This is to ensure all widgets are in their final state when
waiting (especially <PaletteWidget>).
* Change: In <ExceptionWidget>, new method catchAllWrapper() to
execute any std::function< void() > function/method with a "try"/
"catch" wraparound and lauch the widget in case something is catch.
* New: In <hurricane>, support for a oberver pattern, backported from
<katabatic> with an Obervable capable of being linked to any
number of Obervers.
* New: In <Cell>, made it observable to detect Cell change, currently
emit two kind of signals:
- Cell::CellAboutToChange : *before* any change.
- Cell::CellChanged : *after* the change has been completed.
* New: In <UpdateSession>, in Go::invalidate() add the Cell owning the
Go to the UPDATOR_STACK (of course the cell is added only once).
In addition, when the Cell is added, send a notification of
Cell::CellAboutToChange to all it's observers. The slave instances
are also invalidated.
Conversely in UpdateSession::_preDestroy() for each invalidated
Cell send a Cell::CellChanged notification to all observer.
The UPDATOR_STACK has been slightly amended to accept Cell which
are not Gos. Prior to this, the Cell where completly excluded from
the UpdateSession mechanism, so it's instances where never actualised
of anything referring to the Cell for that matter.
Note: we use two different mechanisms to transmit a Cell change,
observers and the slave instance map. I think at some point it
should be unificated.
* Change: In <CellViewer>, make it a Cell observer to redraw when the
cell is modificated (also update the palette).
Uses the catchAllWrapper() to protect all critical actions.
* Change: In <GraphicTool>, no longer need of cellPreModificated and
cellPostModificated signals. Now done through the Cell obersvers.
* Change: In <mauka>, <etesian> & <kite> now uses the catchAllWrapper
method for protection (need to split methods in two, to be able
to pass it as argument). No longer emit cellPreModificated and
cellPostModificated.
Support for RoutingGauge in P&R:
* Bug: In <placeandroute.py>, the connection from the internal power
ring to the connectors was not done correctly. Wrong contact layers
leading to a gap.
* Change: In <BuildPowerRails>, detection of the corona signals based
on how the "pck_px" pad is connected. No longer based on name
matching.
* Change: In <placeandroute.py>, support for 2 routing metal only
(3 metal in the technology).
* Change: In <katabatic> & <kite> support for a "top layer" limitation
on the routing gauge, this allows to use only two routing metals
(METAL2 & METAL3). Work in progress.
Jean-Paul Chaput