* New: In Anabatic::AutoSegment, introduce a the kind (associated to a
flag) "LongLocal". Analog GCells can be very wide, so at least some
carefuly choosen long local segments must be took into account as
attractors in the computation of the optimal axis.
* New: In Anabatic::AutoSegment::computeOptimal(), take LongLocal into
account as attractors.
* Change: In ::GCellTopology constructors compare the layers of the
RoutingPads using layer masks instead of Layer pointers. Allows to
find both "METALx" (symbolic) and "metalX" (real).
* Change: In ::GCellTopology::_doHChannel(), _doChannel(), _doStrut()
and _doDevice(), tag long locals as "LongLocal". This need to be
reviewed as it as bind done a bit too quickly.
* Change: In Anabatic::AutoSegment, due too a much bigger span of the
analogic GCells the _optimalMin & _optimalMax bitfields must use
16 bits instead of 8 (they where overflowed).
* New: In Katana, reorganisation of the initialization procedure to fit
both digital and analogic cases. Create an analogInit() method.
* Change: In Katana::RoutingEvent, the _tracksNb and _tracksFree bitfields
where too short for the Analog GCell size, now uses 16 bits instead of
6.
* Bug: In Katana::GraphicKatanEngine::drawGCell(), skip drawing of a
GCell if *both* width and height are under 150 pixels.
* New: In Katana::Session, add a new isOpen() method.
* Change: In Hurricane Commons.h, even when cdebug print nothing, it slow
down the program (three times for Kite!). Create a macro cdebug_log
which calls cdebug *only* if the debug level is active.
* Change: In Hurricane, in Flags add operator overload for "int" type
and not only "unsigned int". Otherwise the compiler complaints about
ambiguous overload when using enum values which are considered as
"int".
Simpler code for the BaseFlags::contains() method.
Added implicit conversion from BaseFlags toward bool type.
* Change: In Hurricane, in Commons, complete replacement of the previous
two trace systems (trace & ltrace) by a stream-based one.
As it is a true object it is much less fragile than the one based
on defines (but maybe a little slower).
Define a reservation table for the trace levels for all the
Coriolis & Chams components.
* Change: All tools, use the new trace system.
* New: In CRL Core, in RoutingLayerGauge, adds a new parameter "obstacleDw".
It represents the distance to add from the *edge* of a blockage segment
to the next *axis* of a routing track. This was previously computed as
the pitch minus the mimimum half wire width. This works if the pitch
is *equal* to the wire width plus the minimal distance (edge to edge).
But if the wire width is less, than it leads to too great a distance
around obstacles, making them bigger than they are. And potentially
blocking everything. To summarize:
before: obstacleDw = pitch - wireWidth/2 (deduced)
after: obstacleDw = explicitly setup, usually:
pitch - max(wireWidth)/2
Modify the Alliance configuration helper and the various kite.conf
file accordingly.
* New: In Kite, in BuildPowerRails, make use of "obstacleDw" to compute
the footprint of a blockage.
* Test: post-receive hook on server should send mail [1].
* New: In VLSISAPD, in Parameter, callback have now a tag, which the
pointer to the caller. This allow for the callback removal when
the caller is destroyed.
* New: In VLSISAPD, in WidgetDescription, when associated to a parameter,
the destructor must remove the associated callback function on
the Parameter.
* New: In Hurricane, added JSON support for Configuration, separated
from vlsisapd, as the support is not available at this point.
JSON support for Configuration, Parameter & LayoutDescription.
* Change: In Hurricane, in JsonStack, the stack of JsonObjects has been
displaced here from HurricaneHandler. This way, all
JsonObject::toData() can access the JsonOjects in the context
of the parser.
* New: In Hurricane, in DBo::toJson() added support for Entity by
reference (ids).
* New: In Hurricane, added JSON support for all Layer sub-class types.
* New: In Hurricane, in Technology, export the Layers, but must be
sorted by increasing mask value.
* New: In Hurricane, in Entity, added support for Entity by reference (ids).
* New: In Hurricane, in DataBase, added technology full support.
* New: In Hurricane, In JsonNet, move the ring rebuild management from
JsonStack to JsonNet.
* New: In Hurricane, added JSON support for NetAlias, NetExternalcomponents
(not cleanly implemented as a Relation).
* New: In Hurricane, new method Cell::fromJson() to load a cell from
a JSON file.
* New: In Hurricane, In Graphics, make it an observable, for when JSON
fully reload the graphic state, it must be able to notify other
objects (namely the Controller).
* New: In Hurricane, in ControllerWidget, observe the Graphics to regenerate
the palette as needed. New method ControllerTab::graphicsUpdated().
* New: In Hurricane, in RawDrawingStyle added a destructor to release the
Qt pen/brush. Added JSON support for HSVr, DrawingStyle, DrawingGroup,
& DisplayStyle.
* New: In Hurricane, in GraphicsWidget, rewrite correctly the readGraphics()
to erase the previous widgets and re-create the new ones.
* New: In Hurricane, in PaletteWidget, correct re-creation of the layout/widgets
in case of Graphics change.
* New: In CRL Core, in System, register the parameters callbacks with
the address of the object, for later deletion.
* New: In CRL Core, in AllianceFramework, make it observable, to notify
library changes. For the AllianceFramework creation, now allow to
completly bypass the Python initialization system, when we expect
to restore it from a full blob. Added methods to sets the default
RoutingGauge & CellGauge.
* New: In CRL Core, added JSON suppport for CellGauge, RoutingLayerGauge
& RoutingGauge.
* New: In CRL Core, in LibraryManager, oberver AllianceFramework, to update
the list of libraries in case of change (for JSON full reload).
* New: In Unicorn, in ExportCellDialog and UnicornGui add an entry to
call the ASCII/GDSII export driver.
* New: In CRL Core, in AgdsDriver, checks for off-grid coordinates (that
is non-integer one) and round them with a warning. This is most
likely that the layout is flawed but it will at leat generate a
readable ASCII/GDSII file.
- A complete sweep of cleanup to suppress allmost all compiler warnings.
* ./crlcore:
- New: Extented Python support for all objects needed to configure Coriolis.
- New: Configuration files and load helpers completly written in Python.
An XML emulation mode is still avalaible.
- New: UsersGuide, as a replacement for README, written in ReST.
- New: Start of Doxygen documentation (mostly for documenting the initialisation
objects & methods).
- Change: In RoutingLayerGauge, no longer throw exception when the position
requested it outside the track grid. Instead returns first/last track
index.
./coriolis/src/crlcore,
./coriolis/src/knik,
./coriolis/src/katabatic,
./coriolis/src/kite,
./coriolis/src/equinox,
./coriolis/src/solstice,
./coriolis/src/ispd:
- SVN MOVE: Source tree simplification & uniformisation. Now all tools
are at the same level, directly under the root of the repository.
No more "coriolis/src".
Jean-Paul Chaput