* Change: In vlsispad, in Dots, add an enable/disable flag because when printing
into a cmess, it is only the base class ostream which is took into account
as none of it's methods are virtuals (silly me).
* Bug: In Etesian, print into cmess instead of cout and make use of the Dots
enabling feature.
* New: In Katabatic, added AutoContact::migrateConstraintBox() to transfert
constraint from one contact to another.
New flag for AutoContact, CntWeakTerminal for AutoContact which are at
the other of a segment directly connected to a terminal. They may hold
special constraints in case of caged terminals (computed in Kite).
In AutoHorizontal & AutoVertical, in ::_makeDogleg(), transfert flags
and constraints when breaking a segment directly connected to a terminal.
* New: In Kite, in protectCagedTerminals(), uses cross constraint on the
AutoContact opposite to the ContactTerminal (CntWeakTerminal) instead
of moving up one terminal over two consecutives. This is simpler without
degrading the routing quality.
* Change: In Knik, in Vertex, add a "blocked" flag to signal disabled
vertexes in the grid (must not be used by the global router).
Modificate the Graph::getVertex() method so that when a vertex
is geometrically queried, if is a blocked one, return a non-blocked
neighbor. This mechanism is introduced to, at last, prevent the
global router to go *under* the pad in case of a commplete chip.
* New: In Katabatic, in AutoSegment, a new state has been added: "reduced".
A reduced segment is in the same layer as it's perpandiculars.
To be reduced, a segments has to be connected on source & target to
AutoContactTurn, both of the perpandiculars must be of the same layer
(below or above) and it's length must not exceed one pitch in the
perpandicular direction.
To reduce an AutoSegment, call ::reduce() and to revert the state,
call ::raise(). Two associated predicates are associated:
::canReduce() and ::mustRaise().
Note: No two adjacent segments can be reduced at the same time.
* Bug: In Katabatic, in GCellTopology, add a new method ::doRp_AccessPad()
to connect to the pads. Create wiring, fixed and non managed by
Katabatic, to connect the pad connector layer to the lowest routing
layers (depth 1 & 2). The former implementation was sometimes leading
to gaps (sheared contact) that *must not* occurs during the building
stage.
Remark: This bug did put under the light the fact that the initial
wiring must be created without gaps. Gaps are closed by making doglegs
on contacts. But this mechanism could only work when the database if
fully initialised (the cache is up to date). Otherwise various problems
arise, in the canonization process for example.
* New: In Katabatic, in AutoContactTerminal::getNativeConstraintBox(),
when anchored on a RoutingPad, now take account the potential rotation
of the Path's transformation. Here again, for the chip's pads.
* New: In Kite, support for reduced AutoSegment. TrackSegment associateds
to reduced AutoSegment are *not* inserted into track to become
effectively invisibles. When a segment becomes reduced, a TrackEvent
is generated to remove it. Conversely when it is raised a RoutingEvent
is created/rescheduled to insert it. All this is mostly managed inside
the Session::revalidate() method.
* New: In Kite, in KiteEngine::createGlobalGraph(), in case of a chip,
mark all global routing vertexes (Knik) that are under a pad, as blockeds.
* Bug: In Cumulus, in PadsCorona.Side.getAxis(), inversion between X and
Y coordinate of the chip size. Did not show until a non-square chip
was routed (i.e. our MIPS R3000).
* Change: In Stratus1, in st_placement.py add the ClockBuffer class for
backward compatibility with the MIPS32 bench. Have to review this
functionnality coming from the deprecated placeAndroute.py.
In st_instance.py, no longer creates the Plug ring of a Net.
In my opinion it just clutter the display until the P&R is called.
Can re-enable later as an option (in Unicorn).
* Change: In Unicorn, in cgt.py, more reliable way of loading then running
user supplied scripts. Borrowed from alliance-checker-toolkit doChip.py .
In Katabatic & Kite, remove all hard-coded values related to track pitches.
* New: In <Session>, add more convenience function to access RoutingGauge
characteristics.
* New: In <AutoSegment>, <AutoContact>, add support for the "depth spin",
that is, if the source/target contacts are going "top" or "down".
Used to compute the perpandicular pitch. Need a small modification
of the revalidation mechanism. The observers of <AutoSegment> are
notified when the spin changes.
* New: In <AutoSegment>, the getPPitch() method allow to compute the
"perpandicular pitch". For now it is simply the greatest from the
source perpandicular pitch and the target perpandicular pitch.
Make uses of the "depth spin".
* New: In <TrackElement>, <TrackSegment>, cache the perpandicular pitch.
Updated through the notification from the observable.
When upgrading from doxygen 1.5.x to 1.8.5 the way the documentation
is generated has underwent many changes, particularly in the headers.
* Change: In <header.html>, must include the javascripts <jquery.js>
and <dynsections.js>.
* In <CMakeLists.txt>, as the header is customized, doxygen seems not
copy some files like the javascripts and some images (open.png,
closed.png). So we copy them from doxygen installation and make
the CMakeLists.txt install them. I hope they will not change too
much in the future.
* In <doxyfile>, disable markdown support as it do not interpret
correctly the formating we already adopted (with a left margin
to put command into). Use HTML_EXTRA_STYLESHEET instead of
HTML_STYLESHEET. Enable the index (DISABLE_INDEX=NO), for the
top header. Enable dot for inheritance diagram. Set the
EXAMPLE_PATH=. to include the synthetic hierarchy.
Correct the tag inclusion (faulty path in some places).
* In <SoC.css>, create style for the new header generated by doxygen.
* In the documentation, move the synthetic hierarchy into a module.
Project hierarchy reorganisation:
* With svn, we were doing a tool by tool checkout, suppressing the
whole repository hierarchy level.
* The tools were also grouped, inside one repository, into multiple
projects (<bootstrap>, <vlsisapd>, <coriolis>).
* We do not want to split up each tool into a separate repository,
given their tight integration (except for vlsisapd).
* We choose to simplify, and consider all tools in a svn repository
one project. Due to the way Git clone repositories, the directory
containing the project is now to be seen under "src/".
CMake modifications:
* Now that the <vlsisapd> and <bootstrap> projects are merged into
coriolis, modificate the top CMakeLists.txt of each tool to uses
only Coriolis (and bootstrap hard wired).
CCB compile script modifications:
* Uses the new source tree hierarchy, with the project directory
inserted.
* Remove (comment) all parts relateds to svn managment.
* Git is sufficiently simple so that we do not want to integrate
command shortcut into the script.
SVN cleanup:
* Remove the obsolete <chamsin> tool, that has become the full fledged
<chams> project long time ago.
- Change: adopt a tree layout compliant with the UNIX FHS.
* includes under TOP/include/coriolis2.
* shared datas under TOP/shared/coriolis2.
* docs under TOP/share/doc/coriolis2.
* configuration under TOP/etc/coriolis2
* ./crlcore:
- Change: In Environment, comply to the new tree layout, search configuration
files under TOP/etc/coriolis2/.
* ./knik:
- Change: In flute, comply to the new tree layout, get the "POW*.dat" files
from TOP/share/coriolis2/flute-2.4.
- Change: In the CMakeLists.txt, in all the install commands remove all
the leading "/" as they prevents the CMAKE_INSTALL_PREFIX to be took
into account. It was nevertheless working because buildCoriolis.py was
using DESTDIR which is prepended anyway.
* ./goodies:
- Change: In buildCoriolis.py, no longer uses the DESTDIR but instead
CMAKE_INSTALL_PREFIX.
./coriolis/src/crlcore,
./coriolis/src/knik,
./coriolis/src/katabatic,
./coriolis/src/kite,
./coriolis/src/equinox,
./coriolis/src/solstice,
./coriolis/src/ispd:
- SVN MOVE: Source tree simplification & uniformisation. Now all tools
are at the same level, directly under the root of the repository.
No more "coriolis/src".
Jean-Paul Chaput