- Change: Propagate renaming "obstacle" -> "blockage".
- Bug/Change: In Configuration, the value of the extensionCap was too big
(1.5 lambda), reduce to 0.5 lambda. This is a problem, the extension
should be coupled to the layer as it is not the same for each METAL.
- Bug: When using TrackElement, always uses the virtual "->isFixed()" method
instead of trying to access to "->base()->isFixed()" as the base may be
NULL in case of blockage/fixed segment.
- Change: Merge PowerRails & Blockage trans-hierarchical construction (into
PowerRails). All blockages are groupeds under "blockagenet".
Allows to remove TrackBlockage & BuildBlockages.
- Change: In KiteEngine::annotateGloblalGraph(), when routing a full chip,
ring power segments around the core must completly saturate the edges
in their segment direction. This is to prevent the global router to
use paths under the power/ground ring (may generate unsolvable configs).
- Change: In KiteEngine::annotateGloblalGraph(), when routing a full chip,
distinguish three areas: the core (65%), the corona (90%) and the pads
(100%). Capacities on the edges are sets accordingly.
- Change: In RoutingEvent, introduce an alternative algorithm for
conflictSolve1, FindPath which try to deduce the breakpoints from a
truly explorated path. Unfortunatly this gives worst results than the
Cs1Candidates method. The why should be investigated as it's a critical
point in the algorithm.
- Change: In Manipulator::ripupPerpandicular(), when a caged perpandicular
is encountered, instead of just "stopping", rip it up and change is
axis hint (actually increase) it's axis hint so it stands a chance to
go outside the track with an obstacle.
- Change: In RoutingEvent/State::slackenTopology(), allow move up of local
segments when they are tightly constrained *and* blocked (cageds).
Partial modification of functions calls from booleans to flags.
- Bug: In NegociateWindow::NegociateOverlapCost, check for fixed segments
before trying to get DataNegociate. The lack of DataNegociate cause the
TrackElement to be discarted. It's a failsafe behavior, but it leads to
overlaps.
- Bug: In ProtectRoutingPad, in Pad Cells only, *do not* protect RoutingPad
to avoid the edge capacity over the pad to decrease to zero. This is
due to unused RoutingPads being accounted as blockages.
- New: In BuilPowerRails & BuildBlockage, specific support for chip-level
design. The Alliance "top chip" design hierarchical structure is
hard-coded. Top level POWER/GROUND/CLOCK nets must always have the
<vsse>, <vdde>, <ck>, <vssi>, <vddi>, <ckc>, <cki> names.
Specific method to get trans-hierarchical root nets, espcially in
case of global ones (POWER/GROUND). Clock is *not* global.
Some correction in the manner obscured tracks are computeds.
- New: ProtectRoutingPad module that perform a more clean work for protecting
unused RoutingPad.
- Bug: In BuildPowerRails, uses stable_sort<> instead of sort<>, which
causes unexplained core dumps (seems to try to perform a comparison
using the "end" pseudo element). Already occured in Knik, no explanation
other than a STL bug.
- Change: Slight changes in the weights to move up. Now needs a full empty
track instead of a half one.
- New: In Configuration & RoutingEvent, adds support for minimal break length
by layer (METAL1 through METAL7).
- New: Added measures for final detailed wirelength, wirelength expansion ratio,
failed wirelength, number of processeds events and number of unique events.
./metis,
./mauka,
./katabatic,
./kite :
- Change: switch toward the XML configuration system. Suppress the need
of a default static configuration (now built on demand from the XML
database).
In Mauka and Kite, suppress the ConfigurationWidget, wich are
obsoleted by the generic XML configuration widget.
- New: Adds support to restrict the number of routing layers. Not enabled yet
because the router needs some more tweak if using only two routing layers.
- Change: In Configuration, sets the default expandStep parameter to
0.99 (gives better results).
- Change: In KiteEngine::_computeCagedConstraints(), detect and build
a list of segments on which caged constraints are incompatibles
(tearing effect shown in ieee_division). All caged constraints
functions are modificated accordingly.
- Change: In Session::_revalidate(), makes doglegs on Segment with
incompatible caged constraints.
- Mark: vld & ieee_division works.
- Bug: In top CMakeLists.txt the SETUP_PROJECT_PATHS was not inserting
X_USER_TOP *before* X_TOP, thus potentially allowing an obsolete
system-wide configuration to shadow an up-to-date local one.
* ./kite:
- Change: In Configuration/KiteEngine, propagate changes in Configuration
in Kite. Note that a *second* singleton is created at Kite level.
- New: KiteEngine::printConfiguration() method to allow quick checks of
the router's main parameters.
- New: ConfigurationWidget to display/sets all the revelant Katabatic/
Kite configuration parameters. To be used with the TabSettings from
the ControllerWidget.
The ConfigurationWidget is bound to the default (static) Kite
configuration, as once it has been run you obviously cannot change the
router's settings.
- Change: In TrackFixedSegment, when the source/target coordinates of the
fixed segment are outside the grid (i.e. the Cell Abutment Box) truncate
them.
- Change: In GCell::addTrackSegment, when looking for overlap between the
to be inserted TrackSegment and Blockage segment, shrink the Blockage
span by one DbU to avoid false overlap when they are just edges connexes.
- Bug: In RoutingEvent::slackenTopology, in the local segment FSM, looping
on the MaximumSlack state. Now also checks the state count.
- Change: In TrackSegment::canMoveUp() & canPivotUp() adds the "reserve"
parameter and uses it in RoutingEvent to prevent over saturated GCells.
- Change: In Configuration, parameters adjustements: expandStep increased to
0.40. Makes RoutingSets biggers but no noticeable slow down.
- Bug: In RoutingEvent::Manipulator::forceToTrack(), wrong return code,
was always return true, blocking the explorations of least good
Track.
- Bug: In RoutingEvent::_processNegociate(), must reset the "insert state"
while looping on candidate. This bug was having the same effect as
(and masking) the previous one!
- Bug: In TrackSegment::moveUp(), reset the ripup count after the move
up...
- Change: At various DebugSession opening points, sets the debug level to
200 to avoid extraneous debugging output.
- New: KiteEngine::dumpMeasures() to create a data file for later uses
by gnuplot. In interactive mode, this function is called in the
"finalize layout" stage.
- New: Adds measurments "algo", "fin" & "Segs".
./coriolis/src/crlcore,
./coriolis/src/knik,
./coriolis/src/katabatic,
./coriolis/src/kite,
./coriolis/src/equinox,
./coriolis/src/solstice,
./coriolis/src/ispd:
- SVN MOVE: Source tree simplification & uniformisation. Now all tools
are at the same level, directly under the root of the repository.
No more "coriolis/src".
Jean-Paul Chaput