Tomas Vanek a867e36f78 target armv7m: multi-block erase check ... Tested on PSoC6 (Cortex-M0+ core), onboard KitProg2 in CMSIS-DAP mode, adapter_khz=1000. Plain read: flash read_bank 0 /dev/null takes 48 seconds. erase_check without this change: flash erase_check 0 takes horrible 149 seconds!! And the same command with the change applied takes 1.8 seconds. Quite a difference. Remove the erase-value=0 version of algorithm as the new one can check for any value. If the target is an insane slow clocked CPU (under 1MHz) algo timeouts. Blocks checked so far are returned and the next call uses increased timeout. Change-Id: Ic0899011256d2114112e67c0b51fab4f6230d9cd Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4298 Tested-by: jenkins Reviewed-by: Jonas Norling <jonas.norling@cyanconnode.com> Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>		2018-04-10 06:17:00 +01:00
..
Makefile	target armv7m: multi-block erase check	2018-04-10 06:17:00 +01:00
armv4_5_erase_check.inc	armv4_5: Integrate build of erase check code	2016-05-22 15:50:49 +01:00
armv4_5_erase_check.s	armv4_5: Integrate build of erase check code	2016-05-22 15:50:49 +01:00
armv7m_erase_check.inc	target armv7m: multi-block erase check	2018-04-10 06:17:00 +01:00
armv7m_erase_check.s	target armv7m: multi-block erase check	2018-04-10 06:17:00 +01:00
stm8_erase_check.inc	stm8 : new target	2017-12-07 07:53:13 +00:00
stm8_erase_check.s	stm8 : new target	2017-12-07 07:53:13 +00:00