56090a4d4a
Tested on PSoC6 (Cortex-M0+ core), onboard KitProg2 in CMSIS-DAP mode, adapter_khz=1000. Plain read: flash read_bank 0 /dev/null takes 48 seconds. erase_check without this change: flash erase_check 0 takes horrible 149 seconds!! And the same command with the change applied takes 1.8 seconds. Quite a difference. Remove the erase-value=0 version of algorithm as the new one can check for any value. If the target is an insane slow clocked CPU (under 1MHz) algo timeouts. Blocks checked so far are returned and the next call uses increased timeout. Change-Id: Ic0899011256d2114112e67c0b51fab4f6230d9cd Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4298 Tested-by: jenkins Reviewed-by: Jonas Norling <jonas.norling@cyanconnode.com> Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com> |
||
|---|---|---|
| .. | ||
| checksum | ||
| debug/xscale | ||
| erase_check | ||
| flash | ||
| watchdog | ||
| Makefile | ||
| README | ||
README
Included in these directories are the src to the various ram loaders used within openocd. ** target checksum loaders ** checksum/armv4_5_crc.s : - ARMv4 and ARMv5 checksum loader : see target/arm_crc_code.c:arm_crc_code checksum/armv7m_crc.s : - ARMv7m checksum loader : see target/armv7m.c:cortex_m_crc_code checksum/mips32.s : - MIPS32 checksum loader : see target/mips32.c:mips_crc_code ** target flash loaders ** flash/pic32mx.s : - Microchip PIC32 flash loader : see flash/nor/pic32mx.c:pic32mx_flash_write_code flash/stellaris.s : - TI Stellaris flash loader : see flash/nor/stellaris.c:stellaris_write_code flash/stm32x.s : - ST STM32 flash loader : see flash/nor/stm32x.c:stm32x_flash_write_code flash/str7x.s : - ST STR7 flash loader : see flash/nor/str7x.c:str7x_flash_write_code flash/str9x.s : - ST STR9 flash loader : see flash/nor/str9x.c:str9x_flash_write_code Spencer Oliver spen@spen-soft.co.uk