Ian Thompson 61d0757acf target/xtensa: invalidate register cache on reset ... Resolves issues where registers are accessed when poll() logic is inactive or has not yet been triggered. Signed-off-by: Ian Thompson <ianst@cadence.com> Change-Id: If7a4d00938fb188b008325249627f7773c3484c5 Reviewed-on: https://review.openocd.org/c/openocd/+/7197 Tested-by: jenkins Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>		2022-09-18 08:12:02 +00:00
..
flash	flash/nor/stm32lx: Add revision 'X' for Cat.4/3 devices	2022-09-17 21:16:48 +00:00
helper	openocd: fix for polling during "expr" computation	2022-09-13 22:14:28 +00:00
jtag	drivers/bcm2835gpio: Fully restore GPIOs after use	2022-09-13 22:17:41 +00:00
pld	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
rtos	rtos: Support looking up .lto_priv.0 appended to symbol name	2022-09-17 20:58:55 +00:00
rtt	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
server	server: add function to get openocd shutdown status	2022-09-03 21:28:11 +00:00
svf	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
target	target/xtensa: invalidate register cache on reset	2022-09-18 08:12:02 +00:00
transport	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
xsvf	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
Makefile.am	openocd: build: add SPDX tag	2022-07-23 13:06:38 +00:00
hello.c	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
hello.h	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
main.c	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
openocd.c	openocd: prevent target polling during 'init'	2022-08-15 13:22:18 +00:00
openocd.h	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00