Reintroduce checkpatch problem, because now we can handle them better.
Change-Id: Ib81b9910433ae1a240630b898edb19da8d2d5d83
Signed-off-by: Tim Newsome <tim@sifive.com>
Upstream has a checkpatch failure here. I had fixed it because I didn't
know how else to properly get around it back then. Reintroduce the
problem. Now this file is identical to upstream.
Change-Id: Ic03b6bb42945ddbcfd2fe12c0cab5b05eda1a50c
Signed-off-by: Tim Newsome <tim@sifive.com>
When asked to resume an unavailable target, resume any available targets
and report success.
Change-Id: Ieafc63794c1a6eba8948c0f9ce84fa74f9765041
Signed-off-by: Tim Newsome <tim@sifive.com>
When a target in an SMP group is unavailable, the gdb layer might get an
event for a different target in that SMP group, but not one that is the
primary target for that gdb connection. So propagate events if they're
for any of the targets in the SMP group, not just if it's for the first
one in that group.
Change-Id: I8d6738762acc7c0aef96f56ce2cb7f2eeb233b33
Signed-off-by: Tim Newsome <tim@sifive.com>
Exit early if conditions aren't satisfied, instead of putting the core
code inside an if().
Also return ERROR_FAIL if conditions are satisfied but no matching
registers were found.
Change-Id: I77aa63d9f707bc38d1a71899275ba603914b52c9
Signed-off-by: Tim Newsome <tim@sifive.com>
Move `examine_attempted` flag to target struct to make it target specific.
`Info` messages for retry and `Error` messages for failure added.
Change-Id: Id2fbe7dc68d746c936c8412289d0d149fbd80d71
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Add a new riscv specific commands to disable triggers
Change-Id: Ic1842085aa66851c740e0abcbfbe0adbe930920e
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Copy .travis.yml and tools/scripts/checkpatch.pl from upstream
ee31f1578a.
Addresses #913.
Change-Id: I69ad6b734ebf2cf7110010aa0481b6676124610e
Signed-off-by: Tim Newsome <tim@sifive.com>
If it fails, then pass that failure on. If it's simply not implemented,
then we can fall through and try target_get_gdb_reg_list_noread().
This difference matters when the target representing the current
hwthread is unavailable, but the target that is linked to the gdb
connection is available. In that case we want the operation to return an
error to gdb, instead of reading the register from the target that is
available.
Change-Id: I9c84ca556f818c5580e25ab349a34a226fcf0f43
Signed-off-by: Tim Newsome <tim@sifive.com>
When gdb requests to step an unavailable target, report success. When
the target becomes available, the step can complete.
Change-Id: I969ab56139f72a757552928d59edf6eabd598fa4
Signed-off-by: Tim Newsome <tim@sifive.com>
Extend riscv set_ebreak* commands.
Now it can be called without args to print current value.
riscv_ebreak* flags are moved to riscv_info struct.
Change-Id: Ib46e6b6dfc0117599c7f6715c7aaf113e63bd7dc
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
and DP_SELECT_DPBANK.
Use the defined symbols instead of magic numbers.
Change-Id: I19c86b183e57e42b96f76eed180c0492cd67bee1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7539
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
DP_SELECT_APSEL and DP_SELECT_APBANK is no more used in ADIv6.
Change-Id: I4176574d46c6dc8eb3fe3aef6daab6e33492c050
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7538
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
add refresh command for lattice devices
rename gowin reprogram to refresh
rename virtex2 program to refresh
Change-Id: I9da83a614b96da3e947ac4608b0a291b1d126914
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7839
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Provide jtagspi with specific procedures to be able to
use jtagspi for programming spi-flash devices on cologne
chip gatemate devices.
Change-Id: Ifa1c4ca6e215d7f49bd21620898991af213812e9
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7838
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Provide jtagspi with information to use jtagspi for
programming spi-flash devices on intel devices using
a proxy bitstream.
Change-Id: Ib947b8c0dd61e2c6fa8beeb30074606131b1480f
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7837
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Provide jtagspi with information to use jtagspi for
programming spi-flash devices on xilinx devices
using a proxy bitstream.
Change-Id: I68000d71de25118ed8a8603e544cff1dc69bd9ba
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7836
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Provide jtagspi with information to use jtagspi for
programming spi-flash devices on efinix trion and
titanium devices using a proxy bitstream.
Change-Id: I4a851fcaafe832c35bd7b825d95a3d08e4d57a7b
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7826
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Provide jtagspi with specific procedures to be able to
use jtagspi for programming spi-flash devices on lattice
certus and certus po devices.
Change-Id: I6a8ec16be78f86073a4ef5302f6241185b08e1c6
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7825
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Provide jtagspi with specific procedures to be able to
use jtagspi for programming spi-flash devices on lattice
ecp5 devices.
Change-Id: I4a4a60f21d7e8685a5b8320b9c6ebdc2693bbd21
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7824
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Provide jtagspi with specific procedures to be able to
use jtagspi for programming spi-flash devices on lattice
ecp2 and ecp3 devices.
Change-Id: I39028aba47a74a0479be16d52d318f4bff7f2ed4
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7823
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tim Newsome
Kirill Radkin
liangzhen
Parshintsev Anatoly
Peter Mamonov
Tomas Vanek
Daniel Anselmi