riscv-openocd

Commit Graph

Author	SHA1	Message	Date
Paul Fertser	a1bbf4b75b	cfg: add srst_nogate to the supported targets, remove from board configs It depends on the particular target whether it can work with SRST asserted or not, so this belongs to the target config rather than the board config. Also, this allows for simple openocd -f myboard.cfg -c "reset_config connect_assert_srst" command to be used whenever a user feels a need to connect to an unresponsive target. Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2459 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>	2015-01-26 20:54:51 +00:00
Paul Fertser	c7384117c6	Allow transports to override the selected target (hla configs unification) This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>	2014-08-11 21:25:56 +00:00
Jens Hoffmann	075c3f8fe2	cfg: Added st nucleo board configs. This patch adds board configs for Nucleo FXXX boards. Change-Id: I25bfd7d63f734bad710917efa67bc6096aa60ef8 Signed-off-by: Jens Hoffmann <jehoffma@gmail.com> Reviewed-on: http://openocd.zylin.com/2022 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>	2014-03-17 17:05:37 +00:00

Author

SHA1

Message

Date

Paul Fertser

a1bbf4b75b

cfg: add srst_nogate to the supported targets, remove from board configs

It depends on the particular target whether it can work with SRST
asserted or not, so this belongs to the target config rather than the
board config.

Also, this allows for simple

openocd -f myboard.cfg -c "reset_config connect_assert_srst"

command to be used whenever a user feels a need to connect to an
unresponsive target.

Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2459
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2015-01-26 20:54:51 +00:00

Paul Fertser

c7384117c6

Allow transports to override the selected target (hla configs unification)

This should allow to share common configs for both regular access and
high-level adapters.

Use the newly-added functionality in stlink and icdi drivers, amend
the configs accordingly.

Runtime-tested with a TI tm4c123g board.

Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
[gus@projectgus.com: context-specific deprecation warnings]
Signed-off-by: Angus Gratton <gus@projectgus.com>
[andrew.smirnov@gmail.com: additional nrf51.cfg mods]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1664
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-08-11 21:25:56 +00:00

Jens Hoffmann

075c3f8fe2

cfg: Added st nucleo board configs.

This patch adds board configs for Nucleo FXXX boards.

Change-Id: I25bfd7d63f734bad710917efa67bc6096aa60ef8
Signed-off-by: Jens Hoffmann <jehoffma@gmail.com>
Reviewed-on: http://openocd.zylin.com/2022
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2014-03-17 17:05:37 +00:00

3 Commits