To be more informative (and consistent with flash and pld trees), change
'device' parameter name to 'nand' in NAND source files. This change
eliminates confusing 'device->device->' instance from the code, and
it simplifies the forthcoming command handler patches.
ARM11 and newer cores include updated ETM modules. Recognize
their version codes and some key config differences. Sanity
checked on an OMAP2, with an ETM11RV r0p1 (ETMv3.1).
This still handles only scan chain 6, with at most 128 registers.
Newer cores (mostly, Cortex) will need to use the DAP instead.
Note that the newer ETM modules don't quite fit the quirky config
model of the older ones ... having more port widths is easy, but
the modes aren't the same. That still needs to change.
Fix a curious bug ... how did the register cache NOT get saved??
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This trivial patch allows the config script to find the correct
FTDI2xx libraries under Windows XP x64 using msys.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Add the khz and speed_div functions to the parport interface driver.
Add the parport_toggling_time function that tells the parport driver
how long (in nanoseconds) it takes for the hardware to toggle TCK.
[dbrownell@users.sourceforge.net: tweak doc for clarity, mention
multimeter, and whitespace fixes]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Now that nothing uses the old ETM handle any more, remove it.
Add minimal header tweaks, letting non-ARM7 and non-ARM9 cores
access ETM facilities.
Now ARM11 could support standard ETM (and ETB) access as soon as
it derives from "struct arm" ... its scanchain 6 is used access
the ETM, just like ARM7 and ARM9.
The Cortex parts (both M3 and A8) will need modified access methods
(via ETM init parameters), so they use the DAP. Our first A8 target
(OMAP3) needs that for both ETM and ETB, but the M3 ETM isn't very
useful without SWO trace support (it's painfully stripped down), so
that support won't be worth adding for a while.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Make ETM itself use the new toplevel ETM handle, instead
of the to-be-removed lower level one. As of this patch,
nothing should be using the old ARM7/ARM9-specific handle.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Make both useful ETM port drivers (etb, etm_dummy) use the new
toplevel ETM handle, instead of the to-be-removed lower level one.
Do the same for the "oocd-trace" prototype too; and fix its
error reporting paths: return failure codes, don't exit(), etc
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Make ARM7 and ARM9 cores use the new toplevel ETM handle to
trigger ETM setup, not the to-be-removed lower level one.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Rename "struct armv4_5_common_s" as "struct arm". It needs
a bit more work to be properly generic, and to move out of
this header, but it's the best start we have on that today.
Add and initialize an optional ETM pointer, since that will
be the first thing that gets generalized.
The intent being: all ARMs should eventually derive from
this "struct arm", so they can reuse the current ETM logic.
(And later, more.) Currently the ARM cores that *don't* so
derive are only ARMv7-M (and thus Cortex-M3) and ARM11.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Eliminate duplicate code for linking commands into a list.
Adds a check to ensure the command does not already exist;
if it does, return that one instead of creating a duplicate.
Add help for commands regardless of whether a handler is involved.
With this, all sorts of new commands can be found in 'help' text.
Hopefully, all of them have been documented....
Sadly, the lsort function appears to handle nested lists poorly, such
that sub-commands do not group with their parents.
The command_name function returns a malloced string for a given
command and its parents. This can be used to display a message
to the user, but it is used internally to handle registration
and syntax errors. This helps permit arbitrary command nesting.
Add 'const' keyword to 'char *' parameters to allow command handlers to
pass constant string arguments. These changes allow the 'args' command
handler to be changed to 'const' in a subsequent patch.
Subsequent patches expect all command handlers to use a uniform
parameter naming scheme. In the entire tree, these two files used
standard 'argv' instead of our non-standard 'args'. This patch opts
to reduces the noise required to unify the command handlers, using
dominant 'args' form.
A future patch may be used to convert us back to the standard argv, but
that requires coordination with all developers to minimize disruptions.
Separates various groups of files to be built in logical succession.
In each layer, the core module (target.c, nand.c, etc.) is built _after_
their helper modules (e.g. image.c, nand_ecc.c) but _before_ any of
their drivers (e.g. arm966e.c, mx3_nand.c).
This allows problems introduced at the bottom of the stack to result
in build failures as soon as possible, as the helpers and core should
wrap portions of them.
Various cleanups of ETM related code.
- Saner error return paths
- Simplify arm7_9 init ... no need for extra zeroing!
- Shrink some lines
- Tweak some diagnostics
- Use shorter name for ETM struct type.
- Don't exit()
and similar. The diagnostics look forward to having
this ETM code work with more than just ARM7/ARM9.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The "ARM720 uses the new inheritance/nesting scheme" patch
wrongly scrubbed a calloc() from arm720t_target_create().
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Start switching MMU handling over to a more sensible scheme.
Having an mmu() method enables MMU-aware behaviors. Not having
one kicks in simpler ones, with no distinction between virtual
and physical addresses.
Currently only a handful of targets have methods to read/write
physical memory: just arm720, arm920, and arm926. They should
all initialize OK now, but the arm*20 parts don't do the "extra"
stuff arm926 does (which should arguably be target-generic).
Also simplify how target_init() loops over all targets by making
it be a normal "for" loop, instead of scattering its three parts
to the four winds.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
General rule, this is all board-specific and doesn't belong
in target config files. Some of these were just cosmetic.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Here's a patch for the double-reset problem on STM32. I've tested
downloading and debugging with GDB and Eclipse, and everything seems
to work fine.
This effectively sets reset_config to none. trst_only would also
be ok, but that's better left to a board configuration file since
not all boards wire it up.
The NVIC is used to trigger reset, which at least on this chip also
pulses nSRST so the whole system does get rest -- exactly once.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
First cut of these commands. Øyvind tinkered a bit with
the number parsing to bring it up to speed + rebased it.
Ready for testing.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
- improve some names -- a "default" prefix is not descriptive
- add doxygen @todo entries for some issues
- avr8 isn't ever going to need those MMU hooks
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Contrary to my previous assessment, some opportunities to remove forward
declarations were overlooked. Remove them by moving the definitions
of the command registration and interface structure to the end of files.
Remove useless forward declarations.
Moves command registrations to end of files.
Moves flash structure definitions to end of files.
Signed-off-by: Zachary T Welch <zw@superlucidity.net>
Remove useless forward declarations.
Moves command registrations to end of files.
Moves flash structure definitions to end of files.
Signed-off-by: Zachary T Welch <zw@superlucidity.net>
Remove useless forward declarations.
Moves command registrations to end of files.
Moves flash structure definitions to end of files.
Signed-off-by: Zachary T Welch <zw@superlucidity.net>
Remove useless forward declarations.
Moves command registration to end of file.
Moves flash structure definitions to end of files.
Changes a few references to global flash structure to local refs.
Signed-off-by: Zachary T Welch <zw@superlucidity.net>
Zachary T Welch
David Brownell
Liam Redmond
Jonas Horberg
Thomas Kindler
Michael Bruck
Øyvind Harboe