Use LOG_TARGET_xxx() for log messages as it is used for other targets.
Change-Id: Ia7e9629d89f2e6cb3f9c156e74ac1a02960f9373
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8663
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use LOG_TARGET_xxx() for log messages as it is used for other targets.
Change-Id: I2f937c937a5c09d91dc82b4323be3276ab60b01a
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8662
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Add a target-related log function for user messages as it already
exists for other log levels.
Change-Id: I9076677d6451b900332583e748bab3f83df56d3b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8661
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Previously, Linux assigned gpiochip numbers sequentially depending on
when the chip driver was probed. As RP1 is on the end of a PCIe link, it
is probed later than the on-board chips (including expanders connected
over SPI/I2C). This meant that RP1's gpiochip assignment was at an
offset that could potentially change.
A downstream kernel patch now assigns fixed offsets for RP1 and the
onboard gpiochips. Query the device tree to get proper GPIO_CHIP index.
Change-Id: I759978d4b3021c815a7d9febb41961cd1d3d185c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8650
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Tested-by: jenkins
Tested with NUCLEO-U083RC development board.
Change-Id: Iec668b45166543adcd1fa5077d41c57a35d3becf
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8648
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
If a sufficient delay was used before reading `abstractcs` during the
batch execution, `dm->abstract_cmd_maybe_busy` was not cleared and the
following call to `wait_for_idle_if_needed()` (e.g. on `resume`), would
result in a call to `wait_for_idle()` performing a redundant read of
`abstractcs`.
While this is not a bug, it impedes the performance.
Change-Id: I9d234ef6d53af96c60892d71247c10e631dfcc3b
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This patch adds support for the nRF54L15 development kit from Nordic
Semiconductor.
Change-Id: I5e362227fed3982ef21f36e41aade196e0ac7031
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8610
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The RISC-V coprocessor is currently not supported. It is attached to the
DAP via AP#2 but the AP implementation is unknown.
The nRFL54L series uses resistive RAM (RRAM) as non-volatile memory
which can be programmed directly. Since it does not fit in the current
flash memory infrastructure of OpenOCD there is no NVM support so far.
Change-Id: I9934af4fd3bb8b7272954fc4b17638c7dabbbee0
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8609
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant.
Change-Id: Ib064d1031f5ad14ed7711c09bb5f5254d0054d59
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8633
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Remove the prefix since it is redundant.
Change-Id: Ieecfb3583d484847514f1298e819ccf6d26abd84
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8632
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant. While at it, also
get rid of the useless exclamation mark.
Change-Id: I16fd6a88b533fac19b4c622cf9740fd32ba7892c
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8611
Reviewed-by: Richard Allen <rsaxvc@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Suggested during review https://review.openocd.org/c/openocd/+/8533
Only the OS part was being checked anyway.
The aim is to facilitate merging all $host_os checks in the future.
Change-Id: Idce1d5872cf19ef423429fa0c3b2ff7ee3945332
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8607
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The Dummy adapter is useful when developing generic JimTcl code.
Besides, the distributed BUGS file states that you should
try to reproduce any crashes with the Dummy adapter, so
it does not make sense that it is not enabled by default.
Change-Id: I145de06de4d2c0011619b1b941200b63e200db23
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8608
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Change the type of task_name[] to char in order to drop a cast.
Change-Id: I233fc862e972e52130fd4ffcb29a3da36f4f8923
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8599
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Using strcpy is potentially dangerous so just use a safer and easier way
to do the same.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Change-Id: Id85f3b7f8af1eaf14c9951ae710546d2437c70b5
Reviewed-on: https://review.openocd.org/c/openocd/+/8597
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The command 'arm core_state' uses the enum in 'arm->core_state' as
an index in the table of strings to print the core state.
With [1] the enum has been extended with the new state for AArch64
but not the corresponding table of strings.
This causes an access after the limit of arm_state_strings[].
Rewrite the table using c99 array designators to better show the
link between the enum list and the table.
Add the function arm_core_state_string() to check for out-of-bound
values allover the file.
Change-Id: I06473c2c8088b38ee07118bcc9e49bc8eafbc6e2
Fixes: [1] 9cbfc9feb3 ("arm_dpm: Add new state ARM_STATE_AARCH64")
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8594
Tested-by: jenkins
The log messages are very inconsistent across the code base. Add a
guideline for log messages to help improve consistency. The guideline is
based on the most commonly used style in the current code base.
Change-Id: I076d68abe588dd04b59580379e97b82d537def23
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8576
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
rtt_write_channel may write less data than requested,
default device buffer size for channel 0 is 16 bytes,
so currently anything larger than this is dropped.
This fix implements per connection buffer and uses the
connection->input_pending flag to retry writes.
Change-Id: I00c845fccb0248550ad0f0fd9cda7bac7976b92b
Signed-off-by: fanoush <fanoush@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8360
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
During the ./configure build stage, error './configure.gnu: line 1: -e:
command not found' can occur.
Problem: the -e flag with echo is not portable. While some shells support
it (e.g., Bash), others (e.g., POSIX /bin/sh on some systems) do not.
Solution: replacing echo -e with printf, since printf is POSIX-compliant
and works consistently across different shells.
Change-Id: I9efbba662599a61bbe1fc56a33dc1ee7ad58826c
Signed-off-by: Pete Moore <pmoore@mozilla.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8653
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
https://review.openocd.org/c/openocd/+/8439 changed variable `words`
from uint8_t to unsigned int in sfdp.c but failed to update the
LOG_DEBUG line to reflect the new type. On macOS this caused:
src/flash/nor/sfdp.c:107:28: error: format specifies type 'unsigned
char' but the argument has type 'unsigned int' [-Werror,-Wformat]
The formatting of the debug line has been updated to reflect the updated
type.
Change-Id: Ifc7ddb1279ab2603901c969d9c09af847f3a3caf
Signed-off-by: Pete Moore <pmoore@mozilla.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8660
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Registers were not invalidated if the hart became unavailable.
* Improved logging in the case register invalidation involves loss of
information.
Change-Id: Icfb5e190dd6dcb1a97e4d314d802466cab7a01e4
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This changes will allow to unite read_memory/write_memory fucntions
to one access function
(1) Replaced read/write functions arguments with one structure
(2) Unified read_memory/write_memory function pointers
to be stored in same structure
Signed-off-by: Farid Khaydari <f.khaydari@syntacore.com>
this commit fixes a regression introduced in
ba8c1eef5a.
The regression was caused by removal of these lines:
```
- /* Register prefix: "csr_" or "custom_" */
- strcpy(name, reg_type);
- name[strlen(reg_type)] = '_';
```
causing all CSR names with custom names to be parsed as empty strings.
Add maskisr command support to Xtensa NX targets allowing masking
of interrupts during single stepping.
Change-Id: I3835479de8015f1a2842afd1aeab24829e385031
Signed-off-by: Henrik Mau <henrik.mau@analog.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8575
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Use LOG_TARGET_xxx() for the remaining log messages.
Change-Id: If52e3935b57e4c39212ce6b5111ff65159de1373
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8580
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use LOG_TARGET_xxx() for the remaining log messages.
Change-Id: I4b86b206d17dead0662388e827204b40a7d29edd
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8579
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant. While at it, also
get rid of the useless exclamation mark.
Change-Id: I8707342c602cea735c5a423b37ebe40a3aafb137
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8578
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant.
Change-Id: I9c23c0479ba40be24e471309e720060cd03763ee
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8577
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Catch an invalid option like "--enable-buspirate=rubbish".
Also mention all valid values in the help text for those options.
Change-Id: Ib0fb8904132d07cc5cde421aa816ca6971a08769
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8540
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
List AC_ARG_ADAPTERS was missing a comma separating two of the elements.
Also verify that each adapter is set to either 'auto', 'yes' or 'no',
which should prevent such issues from going unnoticed in the future.
Change-Id: I0d407e03b1e5a3edc61d7dc93d5ffa70fe079b3c
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8534
Tested-by: jenkins
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Also convert the Bus Pirate to the common PROCESS_ADAPTERS logic.
Change-Id: Ifa8ebcee380c16d7e308ba7a75dbffdb74208285
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8533
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Tested-by: jenkins
The stlink driver, both in dapdirect and in HLA modes, pretends to
store locally the value of the adapter speed in order to use it
later-on during adapter initialization.
It doesn't work in dapdirect mode since the code to store locally
the value will not be executed until the adapter is already fully
initialized.
This cause an issue in dapdirect mode:
- due to the local value, still kept at -1, the adapter will be
initialized to the lowest clock speed (5 KHz on stlink v2 in SWD
mode);
- after the adapter initialization the framework will again set
the speed with the value requested by the user.
Some target, like nRF51822, only accepts JTAG/SWD speed in a
defined range of frequencies. The initial speed of 5 KHz used by
dapdirect can be out of range, making the target debug port not
working.
The adapter framework already stores the value of speed and makes
it available through adapter_get_speed_khz().
Drop struct hl_interface_param::initial_interface_speed.
Let the code to use adapter_get_speed_khz().
Change-Id: Ie11bf0234574f2a9180d3d3a16efb78e08dfcd86
Reported-by: Andrzej Sierżęga <asier70@gmail.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8574
Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
Tested-by: jenkins
Change the variable name to 'is_configure' to be compatible with the
coding style and use 'bool' as data type.
Change-Id: I8609f9807c8bd14eaf6c93acf63fd51b55c9bbbb
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8573
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The functions:
- semihosting_opcode_to_str();
- semihosting_write_fields();
- semihosting_set_field();
are not referenced outside the file.
Make them static.
Change-Id: Ia8d35554673145fdfe0e501543eb18919863039f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8551
Tested-by: jenkins
The function esirisc_jtag_get_eid() is not used outside the file.
Make it static.
The function esirisc_jtag_disable_debug() is never used.
Make it static and mark it as unused.
Change-Id: I5c99cbf77cc9c527b6e18a3f67caa24f8551d09c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8550
Tested-by: jenkins
The function is not used.
Drop it!
Change-Id: I1625e03714b5a842f668098191c39cce34f815e8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8549
Tested-by: jenkins
Marc Schink
Tomas Vanek
Evgeniy Naydanov
R. Diez
Antonio Borneo
Paul Fertser
fanoush
Pete Moore
Evgeniy Naydanov
Farid Khaydari
Anatoly Parshintsev
Parshintsev Anatoly
Henrik Mau