Commit Graph

72 Commits

Author SHA1 Message Date
oharboe 5aa93a5e8a target read/write is no longer attempted for target_xxx() functions when the target has not been examined(fails w/error).
git-svn-id: svn://svn.berlios.de/openocd/trunk@580 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-15 17:03:13 +00:00
oharboe d300ecfc8e fixed gaffe for default examine implementation
git-svn-id: svn://svn.berlios.de/openocd/trunk@567 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-11 15:49:31 +00:00
oharboe c4a2fdbc39 Reset wip. Just adding hooks. This is just to reduce the size of the actual change, no change in behaviour.
git-svn-id: svn://svn.berlios.de/openocd/trunk@565 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-11 14:06:42 +00:00
oharboe 0d7d64b5e9 Wip - split target setup and target examination
git-svn-id: svn://svn.berlios.de/openocd/trunk@564 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-11 11:19:17 +00:00
oharboe 7805be1b3a added target->type->examine(). Eventually this will allow for bringing up telnet/gdb *before* jtag chain has been validated + it might fix some reset halt problems seen as examine() needs to run after TRST has been asserted.
git-svn-id: svn://svn.berlios.de/openocd/trunk@563 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-11 06:52:52 +00:00
oharboe a064722743 - added "init" command. "init" and "reset" at end of startup script is equivalent
to daemon_startup(still supported).
- print warning if srst and trst change state at the same time when srst_and_trst
is seperate
- reset now performs a trst, examines and validates the jtag chain before targets
assert reset
- if startup fails to examine and validate the jtag chain, try a reset before
trying again


git-svn-id: svn://svn.berlios.de/openocd/trunk@552 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-09 05:50:34 +00:00
oharboe 2b7504c279 - only if "reset halt" or "reset init" are issued will the reset vector be set up
- If communication fails during assert between assert/deassert and during
assert, warnings are printed. The warning suggests using srst_only if the
clock locks up as that would allow the reset vector to be set up before
asserting reset.

git-svn-id: svn://svn.berlios.de/openocd/trunk@544 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-07 10:48:44 +00:00
oharboe 381dc0efab - the reset mode parameter is now DEPRECATED. It is implemented
as an optional parameter with default reset_init. This is to streamline
things w.r.t. the target library.


git-svn-id: svn://svn.berlios.de/openocd/trunk@540 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-04 14:09:03 +00:00
oharboe 35b3c95299 - reverted some of the changes that possibly broke arm926ejs. Waiting
for a bit more info before I can tell with confidence whether or not
this would have any effect.
- worked on error propagation and output for flash

git-svn-id: svn://svn.berlios.de/openocd/trunk@539 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-04 13:47:38 +00:00
oharboe d3f0549f08 - Work on fixing erase check. Many implementations are plain broken.
Wrote a default flash erase check fn which uses CFI's target algorithm
w/fallback to memory reads. 
- "flash info" no longer prints erase status as it is stale. 
- "flash erase_check" now prints erase status. erase check can take a 
*long* time. Work in progress
- arm7/9 with seperate srst & trst now supports reset init/halt
after a power outage. arm7/9 no longer makes any assumptions
about state of target when reset is asserted.
- fixes for srst & trst capable arm7/9 with reset init/halt
- prepare_reset_halt retired. This code needs to be inside
assert_reset anyway
- haven't been able to get stm32 write algorithm to work. Fallback
flash write does work. Haven't found a version of openocd trunk
where this works.
- added target_free_all_working_areas_restore() which can
let be of restoring backups. This is needed when asserting
reset as the target must be assumed to be an unknown state.
Added some comments to working areas API
- str9 reset script fixes
- some guidelines
- fixed dangling callbacks upon reset timeout 


git-svn-id: svn://svn.berlios.de/openocd/trunk@536 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-03 14:00:17 +00:00
oharboe b174a5b6a3 optional count argument to mwX
git-svn-id: svn://svn.berlios.de/openocd/trunk@532 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-02 06:21:24 +00:00
oharboe 86d3e74464 target_call_timer_callbacks_now() now invokes periodic callbacks immediately
git-svn-id: svn://svn.berlios.de/openocd/trunk@529 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-31 19:34:01 +00:00
ntfreak d47e1b8f36 - rename log functions to stop conflicts under win32 (wingdi)
git-svn-id: svn://svn.berlios.de/openocd/trunk@523 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-25 15:45:17 +00:00
ntfreak 4622cb15a9 - armv7m control register now set as dirty when switching context
- armv7m added core_mode to cortex_m3_debug_entry DEBUG msg
- cortex_m3 changed WARNINGS to DEBUG msg in cortex_m3_resume

git-svn-id: svn://svn.berlios.de/openocd/trunk@519 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-21 12:53:29 +00:00
oharboe 3b2a068ea9 added profile command. It was added to simplify evaluation by testers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@516 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-14 11:20:46 +00:00
oharboe 7de7bc80fc - adds two speeds to jtag_speed. reset and post reset speed. Default
is post reset = reset speed.
- removed infinite loop's and exit()'s upon poor arm7/9 communication
- cleaned up error messages a bit. Push ERROR() up into fn's that
  fail and can say something meaningful about what failed.


git-svn-id: svn://svn.berlios.de/openocd/trunk@511 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-13 10:14:41 +00:00
oharboe 0424155dfc - Fixed various error handling when looking for memory leaks
- Fixed memory leak in gdb_server.c
- pushed "Error:" statements up into fn's that know something about what went wrong
- load_image now fails if target_write_memory() fails
- only issue an asynchronous halt() upon connect of GDB. Synchronous halt/reset
  doesn't really work as what's required to initialize the target might involve a
  special monitor sequence for the target in question
- syntax error handling improved(fewer exit()'s)


git-svn-id: svn://svn.berlios.de/openocd/trunk@482 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-10 12:11:07 +00:00
oharboe c78b4fe426 - Improves error handling upon GDB connect
- switch to synchronous halt during connect. This fixes the bug
  where poll() was not invoked between halt() and servicing the
  'g' register packet
- halt() no longer returns error code when target is already halted, just
  logs a warning. Only the halt() implementation can say anything
  meaningful about why a halt() failed, so error messages are pushed
  up to halt()
- fixed soft_reset_halt infinite loop bug in arm7_9_common.c. The rest
  of the implementations are still busted.
- by using USER() instead of command_print() the log gets the 
  source + line #. Nice.
- no longer invoke exit() if soft_reset_halt fails. A reset can often 
  fix the problem.

git-svn-id: svn://svn.berlios.de/openocd/trunk@475 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-07 21:49:16 +00:00
oharboe 087ccf3b6e warnings & comments fixes.
git-svn-id: svn://svn.berlios.de/openocd/trunk@449 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-05 19:33:53 +00:00
oharboe 6d95014674 * fixed malloc corruption in target->debug_reason
* GDB remote server will now remain online even if the target
	  is in a funny state, e.g. if it requires a reset, it is
	  running while GDB is not in the continue or step packet,
	  e.g. via monitor resume/halt commands in GDB script.
	* Added some _DEBUG_GDB_IO_ debug tools
	* Fixed a couple of GDB server lockups, e.g. when O packets
	  detect a severed connection
	* added ACK upon connection (send +).
	* added keep-alive messages to reset so GDB protocol remains happy.
	* fixed crash when timing out connection to GDB

git-svn-id: svn://svn.berlios.de/openocd/trunk@445 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-05 10:28:32 +00:00
oharboe f955b90d28 Fixed GDB timeout crash - regression introduced back when log_add/remove_callback was added.
git-svn-id: svn://svn.berlios.de/openocd/trunk@442 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-04 13:13:55 +00:00
oharboe d3f0919233 Tweaked logging output.
TODO is retired(hopelessly out of date).

git-svn-id: svn://svn.berlios.de/openocd/trunk@400 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-29 15:32:07 +00:00
oharboe 3a3fc30014 - clean up target output strings a bit
- open_file_from_path() now uses logging feature
- open_file_from_path() no longer uses paths for anything but "r" mode. Fixes 
  bug  waiting to happen.


git-svn-id: svn://svn.berlios.de/openocd/trunk@389 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-29 11:31:49 +00:00
oharboe 4febcd8313 Michael Bruck:
arm11

--- Added burst memory transfer mode

This does not explicitly query command execution but rather uses a small
delay produced by the FT2232 on certain TAP commands.

A potential failure of this process is detected afterwards and the
program terminates with an error.

'arm11 memwrite burst disable'
  can be used to switch this feature off.

'arm11 memwrite error_fatal disable'
  can be used to prevent the program to exit on an memory write error


--- Added support for interrupt breaking via VCR register

Use 'arm11 vcr' command to set.


--- Cleaned up the handling of

halt/resume/step/poll, target->state, target->debug_reason,
target_call_event_callbacks() at least as far as I could guess the
intended behaviour from other targets.

Did some overall positive tests with GDB.


--- Added support for breakpoints

Hardware breakpoints only. All breakpoints will be treated as hardware
breakpoints.

All ARM11's seem to have at least 6 hardware breakpoints.

--- Stepping over BKPT added

Modification to PC without touching the target.

--- Stepping over a B or BL to self will do nothing


git-svn-id: svn://svn.berlios.de/openocd/trunk@385 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-29 07:03:28 +00:00
drath 3d6bcf0792 - convert all files to unix line-ending
git-svn-id: svn://svn.berlios.de/openocd/trunk@347 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25 17:48:04 +00:00
oharboe 687a9553c9 From Michael Bruck
- bugfix in server.c
- removed unused parameter from jtag_add_ir_scan et al. This
wasn't necessary in hindsight but anyway.
- arm11 source committed but not not in Makefile.am/target.c for now.

git-svn-id: svn://svn.berlios.de/openocd/trunk@341 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25 08:22:18 +00:00
oharboe e482118106 - using ERROR_COMMAND_SYNTAX_ERROR to print syntax in a couple of places
- some more flash cleanup of checking halted state
- moved output handler into options.c
- very slightly tweaked server.c to make it a bit more compatible with eCos
- retired arch_state. Not quite sure how I managed to leave that out last time.

git-svn-id: svn://svn.berlios.de/openocd/trunk@338 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25 07:50:03 +00:00
oharboe 1aa854684d - fixed target->type->poll() return value
- added arch_state to show status of currently selected target
- simplified target->type->arch_state() api.
- clean up telnet output a bit
- fixed GDB output for arch_state
- removed a couple of unecessary exit()'s
- cleaned up error propagation a bit in a few places

git-svn-id: svn://svn.berlios.de/openocd/trunk@332 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-24 18:52:45 +00:00
vpalatin 3c58540e02 - fix read/write size for small unaligned accesses (thanks Michael Bruck)
git-svn-id: svn://svn.berlios.de/openocd/trunk@318 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-22 16:43:13 +00:00
vpalatin 5cc4601c5f - add support for Marvell Feroceon (thanks to Nicolas Pitre for this patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@315 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-21 11:43:04 +00:00
ntfreak 95df797b2e - add search paths via new arg -s (-search). Thanks Ted Roth
- updated docs for new command

git-svn-id: svn://svn.berlios.de/openocd/trunk@312 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-19 20:04:57 +00:00
ntfreak 5c0e8efa05 - Fixed bug in pathmove for XScale
- added virtual address to working_area.
- Improved error messages in a number of places
- Added ERROR_COMMAND_SYNTAX_ERROR that commands can return to have syntax printed
- Added help for some config commands
- Added verification of sw breakpoints with ERROR() message
- Removed a couple of exit()'s and replaced with error message
- cosmetic fix to armv4_5.c, easier to read
- added polymorphic(with default) virt2phys and mmu enable query function to target.h
- added virt2phys command that uses target->type->virt2phys() fn
Thanks to Øyvind Harboe

git-svn-id: svn://svn.berlios.de/openocd/trunk@310 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-19 19:26:17 +00:00
ntfreak a92d27afb0 - Added a "User:" debug level. These are messages that are intended for the user and are part of normal operation.
- Faster DEBUG/INFO() when they are disabled
- target_read/write_buffer() now uses 16 and 32 bit access for single word aligned requests. Other requests are serviced as quickly as possible.
- *much* faster read/write GDB packets, removing timeout problems.
- GDB read/write packets w/single word aligned 32/16 bit access now use 32/16 bit word access.
- working area can now be changed on the fly. Provides a way to move working area about as MMU is enabled/disabled.
- cleaned up error messages for verify_image.
Thanks Øyvind Harboe

git-svn-id: svn://svn.berlios.de/openocd/trunk@302 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-18 14:32:43 +00:00
ntfreak 70b2de2a63 - added synchronous wait/resume patch. Thanks Øyvind Harboe
- updated docs for halt and wait_halt and resume commands

git-svn-id: svn://svn.berlios.de/openocd/trunk@285 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-09 11:44:17 +00:00
ntfreak da2bbc90fc - added synchronous reset patch, Thanks Øyvind Harboe
- added target_init_reset which calls target_process_reset after all drivers have been initialised

git-svn-id: svn://svn.berlios.de/openocd/trunk@284 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-07 20:20:11 +00:00
mifi 57b5028c63 - added patch to solve the reset problem with arm9 and cortex which Spen had found.
https://lists.berlios.de/pipermail/openocd-development/2008-January/000729.html

(Thanks to Spen for the patch)

git-svn-id: svn://svn.berlios.de/openocd/trunk@279 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-02 13:42:37 +00:00
ntfreak 8d6292d9a0 fixed incorrect elf segment size - Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@277 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-25 18:09:21 +00:00
mifi 080b2e3f2f - added patch to check some malloc problems.
(thanks to Øyvind Harboe for the patch)

git-svn-id: svn://svn.berlios.de/openocd/trunk@276 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-24 21:04:09 +00:00
mifi 651ba91465 - added patch to fix crash in load_image on corrupt elf file or out of memory.
(thanks to Øyvind Harboe for the patch)

git-svn-id: svn://svn.berlios.de/openocd/trunk@274 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-23 19:28:10 +00:00
bodylove db3d66f951 - Eleminated leading tabs/white space
git-svn-id: svn://svn.berlios.de/openocd/trunk@268 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-21 19:34:45 +00:00
ntfreak 68b97e4b5c - add support for cortex_m3 target_request debugmsgs
- target request handler disabled by default until a target has been registered

git-svn-id: svn://svn.berlios.de/openocd/trunk@259 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-17 12:45:06 +00:00
ntfreak 6c9b804d61 - minimum autoconf 2.59 is now required and verified - due to issues with AS_HELP_STRING
- native win32 now handles WSAECONNRESET - no longer exits openocd
- qCRC packet now works correctly under cygwin (gdb compare-sections command)
- removed __USE_GNU define from gdbserver.c
- gdb qSupported packet is now handled, with this we are able to tell gdb packet size, memory map of target
- added new target script gdb_program_config - called before gdb flash programming
- new gdb server command gdb_memory_map (enable|disable> - default is disable
- new gdb server command gdb_flash_program (enable|disable> - default is disable
- gdb flash programming supported - vFlash packets
- image_elf_read_section now does not clear any remaining data, this was causing the gdb checksum to fail with certain files
- reformat of usbprog.c
- memory leak in command_print fixed
- updated texi doc to include new commands
- added gdb programming section to docs

git-svn-id: svn://svn.berlios.de/openocd/trunk@246 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-29 13:51:48 +00:00
ntfreak 55f2fe830a - removed flash write_image - binary compare function has been moved to verify_image command
- minor code reformat and cleanup
- updated docs to include new commands

git-svn-id: svn://svn.berlios.de/openocd/trunk@243 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-20 16:19:10 +00:00
mifi 9e6cec0dd3 - added patch to display device information as INFO too
- added patch which fixes a crash upon flash write error
- added patch which will improve the reset handling when 
  SRST is tied to TRST

(thanks to Oyvind Harboe for these patches)

git-svn-id: svn://svn.berlios.de/openocd/trunk@218 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-09 15:36:21 +00:00
ntfreak e27696f6b0 - add verify_image command
- add support for gdb qCRC packet (compare-sections command)

git-svn-id: svn://svn.berlios.de/openocd/trunk@210 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-10-22 08:44:34 +00:00
ntfreak ce8768f463 - cleaned up str7, str9 and stm32 flash drivers
- str7 flash driver now checks correct busy bits depending on device
- str9 flash driver now disables ITCM order as per st programming manual
- added str7 disable_jtag command
- added gdb_detach command
- updated arm966e cp15 support
- fix crash on mingw build when enabling target_request debugmsgs

git-svn-id: svn://svn.berlios.de/openocd/trunk@209 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-10-08 13:12:39 +00:00
mlu ed36a8d15d - Fixed display of sector sizes in flash.c
- Clean up, remove unused variables and code in armv7, cortex_m3 and stellaris code 
- Move restore_context from cortex_m3 to armv7m
- Updated halt handling for cortex_m3


git-svn-id: svn://svn.berlios.de/openocd/trunk@206 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-09-10 17:43:08 +00:00
drath 29000b204d - reworked presto.c to allow use of either FTD2XX or libftdi (libftdi not functional yet). Configure option changed from --enable-presto to
--enable-presto_ftd2xx and --enable-presto_libftdi
- completed trace point support for use with ARM7/9 DCC
- completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities)
- fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy)
- fixed bug in image_add_section (thanks to Pavel Chromy)
- at91sam7 sector erase reworked (thanks to Pavel Chromy)
- merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets



git-svn-id: svn://svn.berlios.de/openocd/trunk@194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-14 09:48:54 +00:00
drath 20e4e77cdf - renamed M5960 USB JTAG to "flyswatter"
- make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin)
- various whitespace fixes
- removed various warnings
- add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann)
- fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin)
- switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed)
- added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include
semihosting, all ARM7/9 only for now)
- added support for GDB vFlashXXX packets (thanks to Pavel Chromy)
- added support for receiving data via ARM7/9 DCC
- reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash
write_image' (write image files (bin, hex, elf, s19) to a target).
- added support for AMD/ST/SST 29F400B non-cfi flashes



git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-10 19:44:06 +00:00
ntfreak f251b925ff - motorola s19 file loader added
- added checksum support to intel hex file loader
- elf file loader now ignores any bss sections
- mingw build now always opens files in binary mode

git-svn-id: svn://svn.berlios.de/openocd/trunk@185 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-31 09:15:59 +00:00