Without the selection the TAP can be left in bypass.
Change-Id: I79c6bf74802dc9c9475947d1787a3d0b797f3952
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This allows to eliminate up to two DMI NOPs.
Change-Id: I09a18bd896fce2392d1b65d4efb38b53e334a358
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Code cleanup: "slot_t" is unused in riscv013 - remove it.
Change-Id: I9d5a0cf8446a180b1d13a9ce2c86d904b946cf28
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
This would elliminate the need for an extra nop in-between the two reads
in case of a 64-bit register.
Change-Id: I2cddc14f7f78181bbda5f931c4e2289cfb7a6674
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
There was an error introduced by
8319eee9e1.
According to RISC-V Debug Spec 1.0.0-rc1 [3.14.2. Debug Module Contro]:
> 0 (inactive): The module’s state, including authentication mechanism,
takes its reset values (the dmactive bit is the only bit which can be
written to something other than its reset value).
`dmactive` was written together with `hartsel` and `hasel` in
8319eee9e1.
Change-Id: I11fba35cb87f8261c0a4a45e28b2813a5a086078
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This commit is related to testing how OpenOCD responds to `dmi.busy`.
Consider testing on Spike (e.g. `riscv-tests/debug` testsuite). Spike
returns `dmi.busy` if there were less then a given number of RTI cycles
(`required_rti_cycles`) between DR_UPDATE and DR_CAPTURE:
https://github.com/riscv-software-src/riscv-isa-sim/blob/master/riscv/jtag_dtm.cc#L145https://github.com/riscv-software-src/riscv-isa-sim/blob/master/riscv/jtag_dtm.cc#L202
`required_rti_cycles` gets it's value from `--dmi-rti` CLI argument and
is constant throughout the run.
OpenOCD learns this required number of RTI cycles by starting with zero
and increasing it if `dmi.busy` is encountered. So the required number
of RTI cycles is learned during the first DMI access in the `examine()`.
To induce `dmi.busy` on demand `riscv reset_delays <x>` command is
provided. This command initializes `riscv_info::reset_delays_wait`
counter to the provided `<x>` value. The counter is decreased before a
DMI access and when it reaches zero the learned value of RTI cycles
required is reset, so the DMI access results in `dmi.busy`.
Now consider running a batch of accesses. Before the change all the
accesses in the batch had the same number of RIT cycles in between them.
So either:
* Number of accesses in the batch was greater then the value of
`riscv_info::reset_delays_wait` counter and there was no `dmi.busy`
throughout the batch.
* Number of accesses in the batch was less or equal then the value of
`riscv_info::reset_delays_wait` counter and the first access of the
batch resulted in `dmi.busy`.
Therefore it was impossible to encounter `dmi.busy` on any scan of the
batch except the first one.
Change-Id: Ib0714ecaf7d2e11878140d16d9aa6152ff20f1e9
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This allows to merge the implementation in `batch.c` with the one in
`riscv-013.c`.
Change-Id: Ic3821a9ce2d75a7c6e618074679595ddefb14cfc
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
According to the RISC-V Debug Spec (1.0.0-rc1)[3.7 Abstract Commands]:
> While an abstract command is executing (busy in abstractcs is high), a
debugger must not change hartsel, and must not write 1 to haltreq,
resumereq, ackhavereset, setresethaltreq, or clrresethaltreq.
The patch ensures the rule is followed.
Change-Id: Id7d363d9fdeb365181b7058e0ceb0be0df39654f
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This allows to examine each DM ones (e.g. enumerating harts assigned to
the DM). Additionaly, it is guaranteed that the DM is reset before the
examination.
Change-Id: I2333d06ff1152bf51c647d59baa55cb402054cb9
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
According to the RISC-V Debug Spec (1.0.0-rc1)[3.7 Abstract Commands]:
> While an abstract command is executing (busy in abstractcs is high), a
debugger must not change hartsel, and must not write 1 to haltreq,
resumereq, ackhavereset, setresethaltreq, or clrresethaltreq.
Tracking `abstractcs.busy` allows to enforce this rule.
Change-Id: If5975b48cf9fd379033268145c79103c36fb8134
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Fixes:
- Data types of address & data parameters in riscv_batch_add_*()
and riscv*_fill_dm*() changed to uint64_t and uint32_t.
- Corrected the comparison in riscv_batch_full().
- Corrected assertions in riscv_batch_get_dmi_read_op()
and riscv_batch_get_dmi_read_data().
Cleanup:
- Simplified calloc() fail handling in riscv_batch_alloc().
- Added explicit NULL assignments in riscv_batch_alloc()
for clarity and readability. Don't rely on calloc().
- Removed suffix `_u64` from riscv_*_fill_dm*() since it
does not have any meaning.
- Renamed *dmi_write_u64_bits() to *get_dmi_scan_length()
which better describes its purpose.
Change-Id: Id70e5968528d64b2ee5476f1c00e08459a1e291d
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Cleanup, non-functional changes:
- Replaced one call of low-level function dm_op()
by high-level dm_read().
- Made sure that truncation of values passed to dm_*
is explicit. (Added explicit casts.)
Change-Id: I1d1b2f29a822b6841373f3313de2b1e96f514116
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
This reverts commits 2e920a212f and
8dbb1250f5.
The reason is, after `openocd_is_shutdown_pending()` becomes true,
arbitrary command may be executed:
* In `target_destroy()` and the corresponding
`target->type->deinit_target()`.
* In user-specifyed `pre_shutdown_commands` list.
Change-Id: Icd00d1d954cd45e255880a6f76c3a74c098d6a17
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
The reason for the change is a conflict: `dcsr[5]` is `dcsr.v` in
current spec, but it is `dcsr.debugint` in 0.11. This causes `priv`
register to be read incorrectly.
Change-Id: If2d8fdcd8536afa4c7149c453101b00ce0df1ce0
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
There was an error in `dm_read`/`dm_write`: DMI address was checked
against DM registers disregarding DM base address.
To solve the issue `dmi_address()` function was introduced.
Change-Id: Ia3be619417b5f5b53db5dfe302db05170d6787c9
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
The motivalion for the change:
* `riscv_hart_count()` is used only once to print the value into the log
during exmination.
* The returned value is a bit confusing: it's not the total number of
targets on the TAP. It is the number of targets accessable through the
same DM. So the name of the function is misleading.
* This value is already reported on `-d3` level.
So the function seems redundant and can be safely removed.
Change-Id: Iac9021af59ba8dba2cfb6b9dd15eebc98fe42a08
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
In loops that typically take longer time to complete, check if there is
a pending shutdown request. If so, terminate the loop.
This allows to respond to a signal requesting a shutdown during some
loops which do not return control to main OpenOCD loop.
Change-Id: Iace0b58eddde1237832d0f9333a7c7b930565674
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
I don't think there are any real bugs here, but at least this gives us a
clean slate moving forward.
Change-Id: I29c6c398c28dfe580f9a2deb3bdbcfc491a2ceb6
Signed-off-by: Tim Newsome <tim@sifive.com>
The goal of this commit is to provide more robust error handling in
`write_memory_progbuf()`. This is achieved by rewriting it in a fashion
similar to `read_memory_progbuf()`.
The motivation is: some instability in `load_image` was encountered. No
stable reproduction could be obtained, so the root cause was not
determined. Therefore, it was decided to clean-up the code, that may be
implicated in such failures.
Examples of unhanded errors in the code prior to this commit:
* Most of `dmi_write()` return values are discarded.
* If `dm_read()` on `abstractcs` failed (line 4546), `abstractauto` was
not cleared.
Furthermore, the structure of the code was quite complicated, which made
it hard to analyze and reason whether or not all possible failures are
handled properly.
Change-Id: I8a100b686e594855fbf34acf5ccf0e1550f18869
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
OpenOCD style guide(`doc/manual/style.txt`) prohibits use of VLA:
> - use malloc() to create dynamic arrays. Do @b not use @c alloca
> or variable length arrays on the stack. non-MMU hosts(uClinux) and
> pthreads require modest and predictable stack usage.
Change-Id: I12e4a5087fd056d69866137237af6deca27f5d33
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
`LOG_TARGET_DEBUG()` reports file, line and function name at the call
site. This information is not helpfull if it always points to the same
location inside `log_debug_reg()`.
Change-Id: Ib73be0344fb5c80c9ac8e5fdee1084d405522eb7
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
The existing code didn't seem to work right at all. I have spike
modifications that exercise these new cases. I'll merge those once this
has merged.
Change-Id: I89bd336f34f1b208a76f25b6b41fe3877800765b
Signed-off-by: Tim Newsome <tim@sifive.com>
Compilers are good at optimizing, and with functions it's abundantly
clear what all the types involved are. This change means we don't have
to be super careful about the type of values because of what the macro
might do to them that might cause overflow.
The only place where the return type matters is in printf-style
functions, and I made get_value32() for those cases where a change was
needed.
This should set the stage for simply copying the latest debug_defines.h
from the debug spec build again.
Change-Id: I5fb19d0cfc1e20137832a7b344b05db215ce00e1
Signed-off-by: Tim Newsome <tim@sifive.com>
The reasoning for the change:
* `__func__` is part of C99, `__PRETTY_FUNCTION__` is GNU extension.
* `__PRETTY_FUNCTION__` is defined to be the same as `__func__` for C
sources by GCC documentation but differ for C++ sources (full
signature instead of just a name).
* Currently Clang does support `__PRETTY_FUNCTION__`, though it uses
GCC's C++ variant across C and C++.
Therefore using `__PRETTY_FUNCTION__` creates confusion and does not
provide any valueble information in the logs.
Change-Id: Ie0db6d73f602784b6752a30911dcef3dd7ee4594
Sometimes, the value from of some DMI scans has no meaning (e.g. when
`op` is read). Such values should not be decoded. To make the dumps more
consistent, `<no decoding available>` is printed when there is no
decoding for a register.
Change-Id: I415f06a5a80f2fc8fb8ab3f79132bdf0602c8ad6
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
By definition in `target/target.h`, `coreid` is not a unique identifier
of a target -- it can be the same for targets on different TAPs.
Change-Id: Ifce78da55fffe28dd8b6b06ecae7d8c4e305c0a2
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Added the ability to enter dimensionless registers
Change-Id: I1b781959ce4690ec65304142bd9a7c6f540b3e86
Signed-off-by: Anastasiya Chernikova <anastasiya.chernikova@syntacore.com>
Evgeniy Naydanov
Jan Matyas
Evgeniy Naydanov
Emmanuel Blot
Tomas Vanek
Jan Matyas
Parshintsev Anatoly
Tim Newsome
Kirill Radkin
Anastasiya Chernikova