Now that nothing uses the old ETM handle any more, remove it.
Add minimal header tweaks, letting non-ARM7 and non-ARM9 cores
access ETM facilities.
Now ARM11 could support standard ETM (and ETB) access as soon as
it derives from "struct arm" ... its scanchain 6 is used access
the ETM, just like ARM7 and ARM9.
The Cortex parts (both M3 and A8) will need modified access methods
(via ETM init parameters), so they use the DAP. Our first A8 target
(OMAP3) needs that for both ETM and ETB, but the M3 ETM isn't very
useful without SWO trace support (it's painfully stripped down), so
that support won't be worth adding for a while.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Make both useful ETM port drivers (etb, etm_dummy) use the new
toplevel ETM handle, instead of the to-be-removed lower level one.
Do the same for the "oocd-trace" prototype too; and fix its
error reporting paths: return failure codes, don't exit(), etc
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
- ETB
* report _actual_ hardware status, not just expected status
* add a missing diagnostic on a potential ETB setup error
* prefix any diagnostics with "ETB"
- ETM
* make "etm status" show ETM hardware status too, instead of
just traceport status (which previously was fake, sigh)
- Docs
* flesh out "etm tracemode" docs a bit
* clarify "etm status" ... previously it was traceport status
* explain "etm trigger_percent" as a *traceport* option
ETM+ETB tracing still isn't behaving, but now I can see that part of
the reason is that the ETB turns itself off almost immediately after
being enabled, and before collecting any data.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2790 b42882b7-edfa-0310-969c-e2dbd0fdcd60
this fn has something to do with the queue, which it does not as such.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2050 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- bugfix in server.c
- removed unused parameter from jtag_add_ir_scan et al. This
wasn't necessary in hindsight but anyway.
- arm11 source committed but not not in Makefile.am/target.c for now.
git-svn-id: svn://svn.berlios.de/openocd/trunk@341 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- usbprog update (thanks to Benedikt Sauter)
- added embeddedice_send and _handshake functions (thanks to Pavel Chromy)
- added support for 4, 8 and 16 bit ports to etb.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@203 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- use 'etm trigger_percent' setting when programming ETB trigger count
- fixed some small bugs in ETM trace analysis
- fixed minor bug in flash writing (thanks to Pavel Chromy)
git-svn-id: svn://svn.berlios.de/openocd/trunk@197 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed bug in ARM926EJ-S cache handling that caused cache linefills to be disabled after first debug entry
- added support for auto image type detection (thanks to Vincent Palatin)
- further work on ETM trace decoding (tested with a ETB interface using an ETM in normal 16-bit port mode, still experimental)
git-svn-id: svn://svn.berlios.de/openocd/trunk@169 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- reworked etm/etb into a generic etm part with trace capture drivers (currently only etb supported)
- added XScale debug handler binary to repository
- added Thumb disassembling (thanks to Vincent Palatin for this patch)
- added support for non-CFI compatible flashes to cfi driver (currently only SST39VFxxx devices supported)
This checkin is experimental, not suitable for general use
git-svn-id: svn://svn.berlios.de/openocd/trunk@155 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed several uses of uninitialized bits (Thanks to Vincent Palatin for finding and fixing these bugs)
git-svn-id: svn://svn.berlios.de/openocd/trunk@145 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Zachary T Welch
David Brownell
dbrownell
zwelch
duane
oharboe
kc8apf
mifi
ntfreak
drath