- Initial support for FT2232H/FT4232H devices from FTDI.
- Add --enable-ftd2xx-highspeed option to configure script.
- Original patch submitted by Joern Kaipf <lists@joernline.de>.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1998 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Moves references to global jtag interface to default core implementation.
- Missed this reference in the earlier "pointless" patch. Mea culpa.
Important: this has a side-effect. Previously, the error return inside
the interface routine short-circuited the remainder of that function
when 'init' has not been called. With this patch, the command queue
will be cleared in the case that 'init' has been called. Since that
case indicates a buggy script, this does not seem to be a problem.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1995 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add jtag_callback_queue_reset() to reset the callback queue.
- Make interface_jtag_execute_queue() use new helper function.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1994 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Make interface_jtag_execute_queue call new helper function.
- Add default_interface_jtag_execute_queue to wrap jtag interface access.
This patch may look useless on its own, but it helps to isolate the core
JTAG variables from the interface_jtag_* routines, so the later can be
moved into jtag_driver.c in a pending patch.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1993 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Rename last_command_pointer as next_command_pointer, because this variable
stores the address where jtag_queue_command() will store a command pointer.
- Make that variable static, since it is only used internally in jtag.c.
- Remove superfluous accessor for that now-static variable.
- Deobfuscate use of variables in jtag_command_queue.
- Add jtag_command_queue_reset helper function.
- Use it in interface_jtag_execute_queue.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1992 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Factor jtag_add_scan_check to call new jtag_add_scan_check_alloc helper.
- Use conditional logic to define two versions of the helper.
- These helpers will be moved to other files in future patches.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1989 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Make the TCL "drscan" and "irscan" commands finish in RUN/IDLE
unless the user specifies otherwise ... usually they'd choose
something like DRPAUSE or IRPAUSE, avoiding RUN/IDLE.
The current "end" state is whatever the preceding commands left
in "cmd_queue_end_state", which to TCL scripts isn't knowable.
This change should forestall various surprises/bugs.
Also check that any "end" state specified is safe in case this
adapter's JTAG clock is free-running. For now, just issue a
warning; eventually a hard failure is probably correct.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1988 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Whitespace fixes in jtag.c ... mostly end-of-line crap.
Flag "jtag_device" command as obsolete in its helptext.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1987 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Remove broken whitespace ... mostly at end of line, but
also in some cases blocks of inappropriate empty lines.
And spell "comamnd" right. :)
git-svn-id: svn://svn.berlios.de/openocd/trunk@1972 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move definition of 'struct target_type_s' into new 'target_type.h' file.
- Forward delclaration remains in target.h, with comment pointing to new file.
- Replaces #define with #include in source files.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1971 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- use continuations to break long lines of variable assignments
- makes these variables more patch-friendly and conform to style guide
git-svn-id: svn://svn.berlios.de/openocd/trunk@1970 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add DEFINE_TARGET_TYPE_S symbol in files that need it defined.
- Forward declare 'struct target_type_s' only, unless that symbol is defined.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1969 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all calls to target->type->{add,remove}_{break,watch}point.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1967 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all accesses to target->type->name.
- add documentation in target_s to warn not to access field directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1966 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all calls to target->type->get_gdb_reg_list.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1964 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all calls to target->type->bulk_write_memory.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1963 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replace all checks of target->type->examined with target_was_examined().
- replace all setting of target->type->examined with target_set_examined().
- replace clearing of target->type->examined with target_reset_examined().
- add documentation in target_s to warn not to access field directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1962 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all calls to target->type->run_algorithm.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1961 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all calls to target->type->write_memory.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1960 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- replaces all calls to target->type->read_memory.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1959 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fix buffer overrun in mdw; final '\0' would overflow the output buffer.
- return ERROR_COMMAND_SYNTAX_ERROR instead of ERROR_OK if:
- less than one argument is provided
- the command is called with a name other than mdb, mdh, or mdw.
- factor all command output into new handle_md_output function
git-svn-id: svn://svn.berlios.de/openocd/trunk@1958 b42882b7-edfa-0310-969c-e2dbd0fdcd60
The debugging code in jlink_tap_execute() called when _DEBUG_USB_COMMS_ is
defined was using the entire cached scan length to print the results
buffers, and not the correct length of each individual buffer.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1955 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- wordsize will always be 1, 2, or 4 due to preceeding switch statement.
- move call to keep_alive after successful writes, not upon failures
git-svn-id: svn://svn.berlios.de/openocd/trunk@1953 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add jtag_interface_quit, factored from exit_handler() in openocd.c.
- Remove its extern declaration.
- Add static keyword to its definition.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1952 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Provide basic documentation on the ARM ETM and ETB trace commands.
Fix minor goofs in registration of the ETM commands; and whitespace
issues in the proof-of-concept oocd_trace code. (Plus include a
ref to Dominic's email saying that it's just proof-of-concept code.)
Note that I'm still not sure whether the ETM support works. But
documenting how it's expected to work should help sort out which
behaviors are bugs, which will help get bugs patched.
ZW: whitespace changes were split out of this patch but will follow.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1945 b42882b7-edfa-0310-969c-e2dbd0fdcd60
oharboe
zwelch