Commit 236c54c94a ("server/gdb_server.c: support unavailable
registers") correctly returns a string of 'x' when the register is
not available in the current target.
While implementing this, it incorrectly drops the pre-existing
feature of optionally ignoring errors while reading a register.
This feature has a real use case documented in the OpenOCD manual
in chapter 'Using GDB as a non-intrusive memory inspector', where
GDB attaches to a target without halting it. For targets that need
to be halted to read its registers, we need to hack the values of
the registers returned to GDB; either returning 'xxxx' or an error
causes GDB to drop the connection.
Re-add the check on 'gdb_report_register_access_error' to keep the
pre-existing behavior when a register error has to be ignored:
- return a string of '0';
- drop a debug message.
Change-Id: Ie65c92f259f92502e688914f334655b635874179
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 236c54c94a ("server/gdb_server.c: support unavailable registers")
Reviewed-on: https://review.openocd.org/c/openocd/+/8228
Tested-by: jenkins
This allows to eliminate up to two DMI NOPs.
Change-Id: I09a18bd896fce2392d1b65d4efb38b53e334a358
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Caching is somewhat handled in `riscv-011.c`. Handling it additionaly in
`riscv.c` may cause problems. Sice there is no simulator that supports
RISC-V Debug Specification v0.11, so it is not feaseable to automate
testing.
This commit separates 0.11 register accesses and unlocks further
development in this area.
Change-Id: I73ff17ef85106c4ababa38319f446f6c384a1750
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This reverts commit 9d4df3420c.
I believe the reasoning behind this workaround is no longer valid.
Change-Id: Ie8705f75eb8ad7b72fc8ffcf39125be764cb43be
Code cleanup: "slot_t" is unused in riscv013 - remove it.
Change-Id: I9d5a0cf8446a180b1d13a9ce2c86d904b946cf28
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Conflict in src/rtos/FreeRTOS.c due to
fbea7d5d38 -- resolved by replacing
`target->type->name` with a call to `target_type_name()`.
Change-Id: I56702c6133894458903de7a4d764903004aa8b86
hide_csrs should not emit warnings on an attempt to hide non-exitents CSR.
hide_csrs funcitonality is intended to be used for scenarios when we don`t
want certain groups of registers to be available in GDB. Typically this is
needed to simplify integration with various IDE. In such scenarious it may
be impractical/unfeseable to figure out which register is present on a
target. So reporting a situation when a user wants to hide a non-existent
register creates way too much noise. This commit reduces severity of
relevant debug message to LOG_TARGET_DEBUG
Before this patch the following behavior is observed on targets that do
not support hit bit:
```
bp 0x80000004 4 hw
resume 0x80000000
riscv.cpu halted due to watchpoint
```
This happens because the current implementation relies on the presence
of hit bit way too much. While working on this patch few defects in
hit bit-based trigger detection were discovered, added appropriate
TODOs.
The link to product GW16042 was broken, so it has been reduced to
the manufacturer's website, which fixes the warning as a side effect.
The link to Raisonance RLink was broken, and the new one is shorter,
which fixes the warning as a side effect.
Change-Id: I4df9acf2d994d51cd8f375bdac6c803270029506
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8264
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The dummy adapter now uses the same config logic as most adapters.
Its name has changed from "dummy port driver" to "Dummy Adapter".
Change-Id: Ic9ee617aab1f54215835d4d8db03f6637b797082
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7340
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Few files include target_type.h even if it is not needed.
Drop the include.
Other files access directly to target type's name instead of using
the proper API target_type_name().
Use the API and drop the include.
Change-Id: I86c0e0bbad51db93500c0efa27b7d6f1a67a02c2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8260
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
clang doesn't support the gnu_printf attribute that OpenOCD uses if
__GNUC__ and __GNUC_MINOR__ indicates gcc >= 4.4.
Most clang builds set __GNUC__/__GNUC_MINOR__ to 4.2 for historical
reasons, so they don't trigger this condition; however, some builds set
it to something much higher to work around code using __GNUC__ to
determine if a feature that does exist in clang (but not gcc 4.2) is
available, causing OpenOCD to use attribute gnu_printf.
The problem can be reproduced without a special clang build by adding
-fgnuc-version=14.1 to CFLAGS.
Change-Id: I3c0832d4201578b116c5214203f95b6153dad30e
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8258
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Do not free the service in 'connection_closed_handler' because it is
free'd by the server infrastructure.
Checkpatch-ignore: COMMIT_LOG_LONG_LINE
This error was detected with valgrind:
==272468== Invalid free() / delete / delete[] / realloc()
==272468== at 0x484B27F: free (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==272468== by 0x1F34C7: remove_service (server.c:374)
==272468== by 0x2ED3D5: semihosting_tcp_close_cnx (semihosting_common.c:1819)
==272468== by 0x2ED3D5: handle_common_semihosting_redirect_command (semihosting_common.c:1926)
==272468== by 0x1FC703: exec_command (command.c:520)
==272468== by 0x1FC703: jim_command_dispatch (command.c:931)
==272468== by 0x36980F: JimInvokeCommand (in /home/marc/openocd/build/src/openocd)
==272468== by 0x1FFFFFFFFF: ???
==272468== by 0x53ED09F: ???
==272468== by 0x300000001: ???
==272468== by 0x1FFEFFF7FF: ???
==272468== by 0x3D3984: ??? (in /home/marc/openocd/build/src/openocd)
==272468== by 0x2: ???
==272468== Address 0x5fff650 is 0 bytes inside a block of size 24 free'd
==272468== at 0x484B27F: free (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==272468== by 0x2ECA42: semihosting_service_connection_closed_handler (semihosting_common.c:1807)
==272468== by 0x1F2E39: remove_connection.isra.0 (server.c:164)
==272468== by 0x1F349E: remove_connections (server.c:350)
==272468== by 0x1F349E: remove_service (server.c:364)
==272468== by 0x2ED3D5: semihosting_tcp_close_cnx (semihosting_common.c:1819)
==272468== by 0x2ED3D5: handle_common_semihosting_redirect_command (semihosting_common.c:1926)
==272468== by 0x1FC703: exec_command (command.c:520)
==272468== by 0x1FC703: jim_command_dispatch (command.c:931)
==272468== by 0x36980F: JimInvokeCommand (in /home/marc/openocd/build/src/openocd)
==272468== by 0x1FFFFFFFFF: ???
==272468== by 0x53ED09F: ???
==272468== by 0x300000001: ???
==272468== by 0x1FFEFFF7FF: ???
==272468== by 0x3D3984: ??? (in /home/marc/openocd/build/src/openocd)
==272468== Block was alloc'd at
==272468== at 0x484DA83: calloc (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==272468== by 0x2ED326: handle_common_semihosting_redirect_command (semihosting_common.c:1931)
==272468== by 0x1FC703: exec_command (command.c:520)
==272468== by 0x1FC703: jim_command_dispatch (command.c:931)
==272468== by 0x36980F: JimInvokeCommand (in /home/marc/openocd/build/src/openocd)
==272468== by 0x1FFFFFFFFF: ???
==272468== by 0x53ED09F: ???
==272468== by 0x400000002: ???
==272468== by 0x1FFEFFF7FF: ???
==272468== by 0x3D3984: ??? (in /home/marc/openocd/build/src/openocd)
==272468== by 0x2: ???
==272468==
Change-Id: I3e5323f145a98d1ff9ea7d03f87ed96140f49a18
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8257
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Configure the TRACECONFIG.TRACEPORTSPEED register depending on the
trace clock speed. Also catch invalid trace clock speeds.
Change-Id: I1ece1cc59da539732d2d71f296fd55799c195387
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8256
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Use 'error' instead of 'echo' for error messages. Otherwise, capturing
is always started, for example with an unsupported device.
While at it, make the error messages more consistent and clear.
Change-Id: I83c9abfb4514e6b638c4be14651e67f768af8bad
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8255
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: <post@frankplowman.com>
Currently, errors in pre/post-enable events are ignored and capturing is
always started, even if necessary device configuration fails. This
behaviour is confusing to users. Also, the TPIU must be disabled before
re-configuration is possible.
Start capturing and enable TPIU only if no errors in pre/post-enable
events occurred.
Change-Id: I422033e36ca006e38aa4504d491b7947def1237a
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8254
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
When external capturing is configured (default), the SWO pin frequency
is required. Enforce this to avoid a division by zero error.
While at it, ensure that the 'out_filename' variable always contains a
valid string. This saves a few checks and makes the code more clean and
readable.
Change-Id: If8c1dae9549dd10e2f21d5b896414d47edac9fc2
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8224
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This would elliminate the need for an extra nop in-between the two reads
in case of a 64-bit register.
Change-Id: I2cddc14f7f78181bbda5f931c4e2289cfb7a6674
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
There was an error introduced by
8319eee9e1.
According to RISC-V Debug Spec 1.0.0-rc1 [3.14.2. Debug Module Contro]:
> 0 (inactive): The module’s state, including authentication mechanism,
takes its reset values (the dmactive bit is the only bit which can be
written to something other than its reset value).
`dmactive` was written together with `hartsel` and `hasel` in
8319eee9e1.
Change-Id: I11fba35cb87f8261c0a4a45e28b2813a5a086078
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
For MPU configs, determine memory access rights
by probing protection TLB. Issuing IHI without execute
permissions can trigger an exception.
No new clang static analyzer warnings.
Change-Id: Iea8eab5c2113df3f954285c3b9a79e96d41aa941
Signed-off-by: Ian Thompson <ianst@cadence.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8080
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Historically, the function cortex_a_dap_write_memap_register_u32()
was used to discriminate the register write in APB-AP CPU debug
against the complex memory access in AHB-AP memory bus.
It has no sense to keep the function and its comment.
Plus, by forcing atomic write it impacts the debug performance.
Drop it!
A further rework to enqueue sequence of atomic writes is needed.
Change-Id: I2f5e9015f0e27fa5a6d8337a1ae25e753e2e1d26
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8231
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Tested-by: jenkins
The command 'cache auto' was introduced with commit cd440bd32a
("add armv7a_cache handlers") in 2015 to allow disabling the cache
handling done automatically by OpenOCD.
This was probably a way to test the cache handling when there were
still the two independent accesses for APB-AP CPU debug and for
AHB-AP memory bus.
The handling of cache for cortex_a is robust and there is no more
reason to disable it.
The command 'cache auto' is not used in any upstream script.
On target aarch64 this command has never been introduced as the
cache is always handled automatically by OpenOCD.
Drop the command 'cache auto' and add it in the deprecated list.
Drop the flag 'auto_cache_enabled' by considering it as true.
Rename the function 'armv7a_cache_auto_flush_all_data()' as
'armv7a_cache_flush_all_data()' and, while there, fix the error
propagation in SMP case.
Change-Id: I0399f1081b08c4929e0795b76f4a686630f41d56
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8230
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
The initial OpenOCD code for Cortex-A (ARMv7a) [1] was merged in
2009 but, due to lack of public documentation for ARMv7a, it was
almost a simple copy/paste from the existing code for Cortex-M
(ARMv7m).
On Cortex-M the same AP provides access to both CPU debug and CPU
memory. This feature is not present on ARMv7a.
To still keep some communality with ARMv7m code, the change [2]
splits the CPU debug access from the CPU memory access by using
two independent AP; this is copied from the system architecture of
TI OMAP3530 which provides to DAP a direct AHB-AP memory bus on
AP#0, separated from AP#1 for the APB-AP CPU debug.
But the direct memory access through the system bus breaks the
coherency between memory and CPU caches, so change [3] added some
cache invalidation to avoid issues.
The code to allow ARMv7a CPU to really read/write in CPU memory
was added by change [4] in 2011. Such still not optimized
implementation was very slow, so it did not replace the access
through the system bus. A selection through DAP's 'apsel" command
was used to select between the two modes.
Only in 2015, with change [5], the speed of CPU read/write was
improved using the DCC_FAST_MODE. But the direct access to the
memory through the system bus remained.
Finally, with change [6] in 2018 the system bus access was dropped
for good, as the new virtual target "mem_ap" could implement such
access in a more clean way.
Only memory access through CPU remained for ARMv7a.
Nevertheless, a useless cache invalidation remained in the code,
decreasing the speed of the write access.
Drop the useless cache invalidate on CPU memory write and the
associated comment, not anymore valid.
Drop the now unused function armv7a_cache_auto_flush_on_write().
This provides a speedup of between 4 and 8, depending on adapter
and JTAG/SWD speed.
Link: [1] 7a93100c2d ("Add minimalist Cortex A8 file")
Link: [2] 1d0b276c9f ("The rest of the Cortex-A8 support from Magnus: ...")
Link: [3] d4e4d65d28 ("Cache invalidation when writing to memory")
Link: [4] 05ab8bdb81 ("cortex_a9: implement read/write memory through APB-AP")
Link: [5] 0228f8e827 ("Cortex A: fix extra memory read and non-word sizes")
Link: [6] fac9be64d9 ("target/cortex_a: remove buggy memory AP accesses")
Change-Id: Ifa3c7ddf2698b2c87037fb48f783844034a7140e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8229
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Fix possible double free and possible
memory leak while creating an ipdbg hub.
Change-Id: I6254663c27c4f38d46008c4dbff11aa27b84f399
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/8085
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add some helpers for booting ZynqMPs over JTAG. Normally, the CSU ROM
will load boot.bin from the boot medium. However, when booting from JTAG
we have to do this ourselves. There are generally two parts to this.
First, we need to load the PMU firmware. Xilinx's tools do this by
attaching to the PMU (a Microblaze CPU) over JTAG. However, the TAP is
undocumented and we don't have any microblaze support in-tree. So
instead we do it the same way FSBL does it:
- We ask the PMU to halt
- We load the firmware into the PMU RAM
- We ask the PMU to resume
The second thing we need to do is start one of the APU cores. When an
APU is released from reset, it starts executing at the value of its
RVBARADDR. While we could load the APU firmware over the AXI target,
it is faster to load it over the APU target. To do this, we put the APU
into an infinite loop before halting it. As an aside, I chose to use the
"APU" terminology as opposed to "core" to make it clear that these
commands operate on the A53 cores and not the R5F cores.
Typical usage of these commands could look something like
targets uscale.axi
boot_pmu /path/to/pmu-firmware.bin
boot_apu /path/to/u-boot-spl.bin
But of course there is always the option to call lower-level commands
individually if your boot process is more unusual.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: I816940c2022ccca0fabb489aa75d682edd0f6138
Reviewed-on: https://review.openocd.org/c/openocd/+/8133
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The gdb subsystem is initialized after the first target examine,
so the field struct target::gdb_service is NULL during examine.
A command "smp off" in the examine event handler causes a SIGSEGV
during OpenOCD startup.
Check for pointer not NULL before dereferencing it.
Change-Id: Id115e28be23a957fef1b97ab66d7273f0ea0dce4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8216
Tested-by: jenkins
The code for cortex_a allocates the register cache during the very
first examine of the target.
To prevent a segmentation fault in assert_reset(), the call to
register_cache_invalidate() is guarded by target_was_examined().
But for targets with -defer-examine, the target is set as not
examined in handle_target_reset() just before entering in
assert_reset().
This causes registers to not be invalidated while reset a target
examined but with -defer-examine.
Change the condition and invalidate the register cache if it has
been already allocated.
Change-Id: I81ae782ddce07431d5f2c1bea3e2f19dfcd6d1ce
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8215
Tested-by: jenkins
The code for aarch64 allocates the register cache during the very
first examine of the target.
To prevent a segmentation fault in assert_reset(), the call to
register_cache_invalidate() is guarded by target_was_examined().
But for targets with -defer-examine, the target is set as not
examined in handle_target_reset() just before entering in
assert_reset().
This causes registers to not be invalidated while reset a target
examined but with -defer-examine.
Change the condition and invalidate the register cache if it has
been already allocated.
Change-Id: Ie13abb0ae2cc28fc3295d678c4ad1691024eb7b8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8214
Tested-by: jenkins
Prevent a segmentation fault by preventing to try to halt a target
that has not been examined yet.
Change-Id: I5d344e7fbdb5422f7c5e2c39bdd48cbc6c2a3e58
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8213
Tested-by: jenkins
Commit 16b4b8cf54 ("Cortex-M3: expose most DWT registers") added
the DWT registers to the list of CPU registers.
The commit message from 2009 reports the reason behind this odd
mixing of CPU and DWT registers.
This feature got broken in 2017 with the introduction of the field
struct reg::exist and its further use in the code. As result, the
command 'reg' on a target Cortex-M reports only the core registers
and then the header line
===== Cortex-M DWT registers
not anymore followed by the DWT registers.
Fix it by tagging each DWT registers as existing.
Change-Id: Iab026e7da8d6b8ba052514c3fd3b5cdfe301f330
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: b5964191f0 ("register: support non-existent registers")
Reviewed-on: https://review.openocd.org/c/openocd/+/8198
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
To help readability and discriminate the 'then' block from the
multi-line condition, suggest to increase the indentation of the
condition.
Change-Id: I02e3834be3001e7ecf24349ad3cefe94b27b79c8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8199
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
For GDB to fully support hardware watchpoints, OpenOCD needs to tell GDB
which data address has been hit. OpenOCD relies on a target-specific
hit_watchpoint function to do this. If GDB is not given the address, it
will not print the hit variable name or its old and new value.
There does not seem to be a way for the hardware to tell us which
trigger
was hit (0.13 introduced the 'hit bit' but this is optional).
Alternatively,
we can decode the instruction at dpc and find out which memory address
it accesses.
This commit adds support for RVC (compressed) load and store
instructions.
Related to:
https://github.com/riscv-collab/riscv-openocd/issues/688https://github.com/riscv-collab/riscv-openocd/pull/291
Antonio Borneo
Evgeniy Naydanov
Evgeniy Naydanov
Anatoly Parshintsev
Jan Matyas
Parshintsev Anatoly
R. Diez
Bernhard Rosenkränzer
Marc Schink
Ian Thompson
Daniel Anselmi
Sean Anderson
Aleksey Lotosh