Commit 11019a824d ("adi_v5: enforce check on AP number value")
introduces the macro DP_APSEL_MAX and use it in place of hardcoded
magic numbers for the upper limit of AP selection value.
Use the macro also while defining the array of struct adiv5_ap in
struct adiv5_dap.
Change-Id: I88f53ceb710f92a48a8026a365709fbf2d9e6912
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5806
Tested-by: jenkins
All the HLA transports (hla_swd and hla_jtag) register the same
set of commands. Such commands are mainly aimed at handling JTAG
compatibility that is required for the transport hla_jtag only.
Split per transport the command registration and limit the
commands to only those required by the transport itself.
Replace the command "hla newtap" with the transport specific
"swd newdap" or "jtag newtap".
Deprecate the command "hla".
Change-Id: I79c78fa97b707482608516d3824151a4d07644c0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4877
Tested-by: jenkins
A JTAG TAP for boundary scan should be added in the scan chain
through the command "jtag newtap".
In some TCL target script the boundary scan TAP is added through
the command "swj_newdap", command that is inappropriate in this
context because specific for arm adi-v5 SWJ-DP.
This situation was probably created to bypass the error with HLA
framework, caused by missing command "jtag newtap".
Add the command "jtag newtap" in HLA, by reusing the existing
code for command "hla newtap".
Fix the TCL target scripts to use the command "jtag newtap" for
the boundary scan TAPs.
The TCL script target/psoc6.cfg has no evident reference to HLA,
so the reason for using "swj_newdap" is less clear. Nevertheless
it uses the wrong command and, once HLA is fixed, there is no
reason to avoid fixing it too.
Change-Id: Ia92f8221430cf6f3d2c34294e22e5e18963bb88c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4873
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
st_nucleo_l1.cfg is based on STM32L152RET6 which support
dualbank flash.
Change-Id: I7ecdb7b7557229465e23eed667f20cd84197dfc7
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Reviewed-on: http://openocd.zylin.com/5829
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
While loading to flash with debug level at least 3,
OpenOCD tries to print the whole loaded bitstream.
This will be very-very-slow due to implementation of
conversion from buffer to string.
* fix condition on selected debug level in jtag/core.c
* replace slow buf_to_str function from helper/binarybuffer.c
with faster but_to_hex_str function
Change-Id: I3dc01d5846941ca80736f2ed12e3a54114d2b6dd
Signed-off-by: Samuel Obuch <sobuch@codasip.com>
Reviewed-on: http://openocd.zylin.com/5800
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Make checkpatch require Signed-off-by
This will make it easier to send changes contributed here to mainline
OpenOCD.
(Intentionally not including the required line here to make sure I can't
just merge this.)
Change-Id: I089084d38f3e08859d62cf7eface405f37af4799
* Whitespace fix.
This PR isn't building on travis. Maybe because I only changed
.travis.yml. Here's a source change to force a build (hopefully).
Change-Id: I8a828fe1d56a1960bc4bfb91d3d2f3a0790ad571
* Can't check for signoff on sources alone.
Change-Id: I741a299b64bf14857a4e1807b254a7d270b2e466
Signed-off-by: Tim Newsome <tim@sifive.com>
* Actual whitespace fixes.
Why didn't this fail to build before?
Change-Id: I339c03c4ef96546dbef5f16e635921a4fdaf9b35
Signed-off-by: Tim Newsome <tim@sifive.com>
A ton of constants got a new prefix, so I made a lot of changes to
match, but no functional changes.
I did define DTM_DMI_MAX_ADDRESS_LENGTH in batch.c. That definition
never should have been in debug_defines.h, which I missed during code
review.
Change-Id: If5d86660f84bb0a3f2865fb36ef05d6630486d8b
Accessing registers on targets that implement 0.9 or earlier will no
longer work. If you need that we can talk about making it a config
option.
Change-Id: I953b639cf9a92ee9b0422e035da57c1d07504237
* WIP, apply stash with conflicts.
Change-Id: Ia794bde419aa29161c68898d20e30527e69f5a31
* Fix conflict resolution problems.
Change-Id: I4cedc348cf613f98cc5a36886f37c568ca644238
* Add repeat_read command.
Only implemented for sba v1 right now, and poorly tested at that.
Change-Id: I1d9ff63e1dea14b3f6a9f8ba4dad53668bf8038b
* Hide bogus address in repeat_read
Change-Id: Ib66c1fa60df9c7fc7cc87880b0fddc52825b48aa
* WIP make repeat read work with progbuf.
Change-Id: I555f8b880c8bf0d1ed0f3f90c7987a5b516a7a79
* WIP
Change-Id: Ic567cea68355ae907e94bd25185a2c9be6fd798d
* Fix error handling when increment is non-zero.
Change-Id: I5a2f3f2ee948fd4e12c0443a542e85b7b5c5791a
* Correctly(?) handle failures when increment is 0.
I'm not 100% convinced that this ensures every read value shows up in
the output, but it ought to work.
Change-Id: I1af3e7174cf9d5e6f293456fb5ead629e17faaaa
* Don't crash when asked to read no data.
Change-Id: I4061b5c720a43a4f828384ab9eacc89557adfa05
* Remove unnecessary comment.
Change-Id: I1be3d699b86299339b3a830ca1ef13c9f5b9fe0f
* Document `riscv repeat_read`.
Change-Id: I4a0f071f38784b2de034f8c1b0ce75d6d2d326b2
There are cases where LOG_*() functions are called before the logs
are initialized with log_init().
E.g. in transport_register() that is executed in gcc constructors,
thus called even before main().
With debug_level set to LOG_LVL_USER=-1 all the LOG_ERROR() get
dropped.
Properly initializing debug_level cause segmentation fault due to
log_output still not initialized.
Initialize debug_level to LOG_LVL_INFO so errors get printed.
Handle separately the case of log_output still NULL, meaning that
log_init() is not called yet.
Change-Id: I2ea32c87a4955fb44e79b38131c456e25dfbc327
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5602
Tested-by: jenkins
The warning message should be printed if the target is NOT halted, not
if it IS halted.
Change-Id: I0a38292a8a2e20e4a4a5ada92b475d551d4cbf38
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/5794
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The "Corvette-F1" is an Arduino-compatible evaluation platform,
which fully supports AndesCore. The board has FTDI FT2232 to
connected to FPGA's JTAG interface.
The "ADP-XC7KFF676" is a development and prototyping board that
provides capacity for evaluation of AndesCore processors.
It works with AICE in-circuit debugging tools.
This patch also include target/nds32v5.cfg to support AndesCore
N22/N25F and AndeShape Platform AE250.
Change-Id: I144d5063d5086d00ec44634a5028b5ea5d2eba33
Signed-off-by: Hellosun Wu <wujiheng.tw@gmail.com>
Reviewed-on: http://openocd.zylin.com/5338
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Either of protect and protect_check driver callbacks can be NULL. In
virtual_protect, reuse flash_driver_protect which checks for that case
and generates a nice error message and return code. In
virtual_protect_check, there is no corresponding flash_driver_*
function, so add the NULL check directly.
Change-Id: Ia63d85ede640a8382cf5cad0760f5d1ffe4d7cfe
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/5782
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I677bc4487fc2eff2c32e14ca2db5470fddaa63b5
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/5778
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* use proper type codes
* add 0x in front of hex values
* remove some concatenated empty strings
Change-Id: I06a8344d0ed62de7a0f3e2dd8fba69b17eeb3626
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/5783
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
There are failure cases of target_create() that are not checked.
Plus, in case of failure the memory allocated in not properly
released before returning error.
Check all the possible failure in target_create().
Change current_target only when target is successfully created.
Add the new target to all_targets list only when target is
successfully created.
Release all the allocated memory before quit on failure.
Use malloc() instead of calloc() for target->type, because the
struct will be fully populated with memcpy().
Change-Id: Ib6f91cbb50c28878e7c73dc070b17b8d7d4e902f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5776
Tested-by: jenkins
If the target is not examined, many internal data required for the
gdb connections are not ready nor allocated. This causes OpenOCD
to hit a segmentation fault.
After the execution of the gdb-attach event handler, check if
target has been examined and eventually return error to refuse the
gdb connection.
Plus, since OpenOCD does not implements non-stop mode yet, gdb
expects the target to be halted by the inferior when the
connection is established.
Print a warning to inform the user in case the target is not
halted, but still accept the gdb connection to permit the
non-intrusive memory inspection with gdb, as explained in
http://openocd.org/doc/html/GDB-and-OpenOCD.html#gdbmeminspect
Change-Id: If727d68f683c3a94e4826e8c62977de41274ceff
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5201
Tested-by: jenkins
If a target is not examined when the debugger tries to connect to it
then it can lead to undesired/undefined behavior.
In particular it leads to a zero pointer dereference on the aarch64.
Change-Id: I67f2b714ab8b2727fd36f3de16d7f9017b4c55fe
Signed-off-by: Mikhail Rasputin <mikhail.godlike.rasputin@yandex.ru>
Reviewed-on: http://openocd.zylin.com/5727
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Those changes were automatically suggested by tool "autoupdate".
Change-Id: Id70bdeacc3c80816f3f5c65d1abceabb5cdf3873
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: http://openocd.zylin.com/5638
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
As the comment states, the 'init' command is issued before the
command 'dap apsel', otherwise it fails.
This dependency has been already fixed in commit e48690cb26
("target/arm_adi_v5: allow commands apsel and apcsw during init
phase"), so the command 'dap apsel' can now be issued directly.
Remove both the unneeded 'init' command and the comment that
documents and justify its presence.
Change-Id: I50f0a820fa7ead6f5a3bd9cc5180d521070822c9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5786
Tested-by: jenkins
There is no deinit_target method, so few memory allocations leak
at openocd exit.
Issue identified by tracking all calls to arm_dpm_setup().
Implement the method arm11_dpm_deinit() to free all the memory
allocated in arm11_dpm_init() and call it in the new
arm11_deinit_target().
NOT TESTED on real HW.
Change-Id: Icab86e290fc2db14f70eb84c8286357aadb02a35
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5694
Tested-by: jenkins
By default GDB timeouts after 2 seconds, even if this value can be
modified with GDB command "set remotetimeout".
On OpenOCD side, the default event for GDB attach is to halt the
target and wait it to halt. But here the default timeout of the
halt command is 5 seconds!
If the target cannot be halted (e.g. it's kept in reset by another
core or the debugger doesn't have enough privileges) then GDB will
timeout while OpenOCD is still waiting and is unable to
communicate with GDB.
Decrease the halt timeout to 1 second in the default GDB attach
event handler.
Change-Id: I231c740816bb6a0d74b0bc679a368a6cbfb34824
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5687
Tested-by: jenkins
Implementation largely taken from Nuvoton github
https://github.com/OpenNuvoton/OpenOCD-Nuvoton
Reset is still not fully compatible with OpenOCD framework.
Adapted to hidapi.
Change-Id: Ieb1791b1b7f0b444c15c9668f8f2bcf34975d48f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Zale Yu <cyyu@nuvoton.com>
Reviewed-on: http://openocd.zylin.com/5720
Tested-by: jenkins
Reviewed-by: Saravanan Sekar <saravanan@linumiz.com>
Reviewed-by: Marc Schink <dev@zapb.de>
this flash is used on the Digilent CMODA7 FPGA board
Change-Id: I6749ca3fbebf2e384051a26a3fd253da5d6e25fb
Signed-off-by: Michael Betz <michibetz@gmail.com>
Reviewed-on: http://openocd.zylin.com/5787
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Add support for Nu-Link1 over usb hidapi and config file.
The original work is fetched from Nuvoton github.
Code cleanup, fix merge conflicts, compile and runtime issues.
Switch the code from libusb to hidapi, being the device HID based.
Add documentation.
Merge fixes for multi-word memory read.
Reset is not fully compatible with openocd framework; currently
the target is reset and then halt at openocd start.
Change-Id: I9738de4e26783ba462ea3e39ec32069fd5bb7d94
Signed-off-by: Zale Yu <cyyu@nuvoton.com>
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5635
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
This commit fixes support for the nEDBG CMSIS-DAP interface
which is used ie. on the Curiosity Nano SAMD21 board.
nEDBG, similarily to mEDBG, does not support 512 byte HID packets.
This patch adds its USB PID to the exclusion list to make sure that
we stick with the default 64 bytes.
Change-Id: I9010b0cf77c0b1347269a759b5d16ee5155abb16
Signed-off-by: Michal Potrzebicz <michal@elevendroids.com>
Reviewed-on: http://openocd.zylin.com/5756
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The blinking was implemented for JTAG only.
Extend it to SWD.
There is no error check on SWD exchange. Add a FIXME for further
fix.
Change-Id: I42a6708c54b1eefaf691e0fe09ca58c42b2764fd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5771
Tested-by: jenkins
Bitbang interface allows having a LED on one of the GPIO.
Let also linuxgpiod driver to specify and use the LED connection.
Change-Id: Id3d8772ee1808b92354fd073ba3947bacd8253ef
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5770
Tested-by: jenkins
While there, replace s/return(0)/return 0/ that causes checkpatch
to fail.
Change-Id: I5ad54cffca629475563c471114a9f77301a9e4f8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5768
Tested-by: jenkins
Antonio Borneo
Alexandre Bourdiol
Samuel Obuch
Jan Kowalewski
Tim Newsome
Jiuyang Liu
Samuel Obuch
Andreas Fritiofson
Christopher Head
Hellosun Wu
Mikhail Rasputin
R. Diez
Jan Matyas
Michael Betz
Zale Yu
Michal Potrzebicz