Commit Graph

3 Commits

Author SHA1 Message Date
Antonio Borneo e6505b0489 tcl/target: add SPDX tag
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
	fgrep -rL SPDX tcl/ target| while read a;do \
	sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
	}' $a;done

With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.

Change-Id: I7b2610300b24cccd07bfa6fb5f1266970d5d3a1b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7027
Tested-by: jenkins
2022-06-24 21:53:35 +00:00
Tarek BOCHKATI b8fd9aecb1 stm32l4x: add OTP support for STM32 G0/G4/L4/L4+/L5/WB/WL devices
this is a rework of #5320 started by Andreas then abandoned.

same syntax as in stm32f2x driver:

  enable OTP for writing
  > stm32l4x otp 1 enable

  write to OTP
  > flash write_bank 1 foo.bin 0
  > flash filld 0x1FFF7000 0xDeadBeafBaadF00d 1

  read OTP
  > mdw 0x1FFF7000 4

  disable OTP
  > stm32l4x otp 1 disable

Change-Id: Id7d7c163b35d7a3f406dc200d7e2fc293b0675c2
Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com>
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5537
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-24 17:15:38 +00:00
Andreas Bolsch ba131f30a0 Flash driver for STM32G0xx and STM32G4xx
Flash module of STM32G0/G4 family is quite similar to the one of
STM32L4, so only minor changes are required, in particular
adaption of flash loader to Cortex-M0. Register addresses
passed to flash loader to simplify integration of L5.
Added re-probe after option byte load.
Added flash size override via cfg file.
WRPxxR mask now based on max. number of pages instead of fixed 0xFF,
as G4 devices fill up unused bits with '1'.
Sizes in stm32l4_probe changed to multiples of 1kB.

Tested with Nucleo-G071RB, G030J6, Nucleo-G431RB and Nucleo-G474RE.
Gap handling in G4 Cat. 3 dual bank mode tested with STM32G473RB.
This handling isn't optimal as the bank size includes the
size of the gap. WB not tested.

Change-Id: I24df7c065afeb71c11c7e96de4aa9fdb91845593
Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-on: http://openocd.zylin.com/4807
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-03-16 15:25:10 +00:00