If the CTI is not specified OpenOCD fails target's examination
without indicating the reason.
Drop an error message about the missing CTI.
Change-Id: I344537fb21cf38785796ba938e71890e04135509
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6788
Tested-by: jenkins
With jimtcl 0.81 the syntax of the TCL command 'expr' requires the
multiple arguments to be within curly brackets.
Update the examples in the documentation to follow the new syntax.
While there, split one example to avoid it to exceed the line size
during pdf document generation.
Change-Id: I91cca419f8273415ccb0c2ce369fc6ac476e34e5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6809
Tested-by: jenkins
Changed flash driver to support writing to the user data page, as well as to any portion of the lockbits page above 512 bytes (the amount used for the actual page lock words). The top part of the lockbits page is used on at least the EFR32xG1 chips for the SiLabs bootloader encryption keys.
As presented to the user, the lockbits page is the same size as the other pages, but any attempt to write to its low 512 bytes is an error. To enforce this, efr32x_write is renamed to efm32x_priv_write and a wrapper function is provided in its place. If the user erases the lockbits page, the driver rewrites the cached lock words after the erase. When the driver erases the lockbits page in order to update the lock words, it first takes a copy of anything stored in the top part of the page, and re-programs it after the erase operation.
There are now multiple instances of flash_bank for each target, and the flash_bank instances must share their cached lock words to operate as intended. Therefore, when a bank is created, the global flash bank list is used to find any other banks that share the same target. Since some banks in the global list are invalid at the time free_driver_priv is called, reference counting is used to decide when to free driver_priv.
To avoid the need to find the lockbits flash_bank from another flash_bank, efm32x_priv_write and efm32x_erase_page now take an absolute address.
There didn't seem to be any reason to prohibit unprotecting individual flash pages, so that limitation is removed from efm32x_protect().
This addresses ticket #185.
Valgrind-clean, except for 2x 4kiB not freed/still reachable blocks that were allocated by libudev.
No new Clang analyzer warnings, no new sanitizer warnings.
Signed-off-by: Doug Brunner <doug.a.brunner@gmail.com>
Change-Id: Ifb22e6149939d893f386706e99b928691ec1d41b
Reviewed-on: https://review.openocd.org/c/openocd/+/6665
Tested-by: jenkins
Reviewed-by: Fredrik Hederstierna <fredrik.hederstierna@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This replaces a static array with 8 bytes per register. When there are
vector registers larger than 8 bytes, they would end up clobbering each
other's values. I can't believe I didn't catch this earlier.
See https://github.com/riscv/riscv-openocd/pull/658
Change-Id: I9df4eaf05617a2c8df3140fff9fe53f61ab2b261
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6775
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
We have the macro
#define COMMAND_HANDLER(name) \
static __COMMAND_HANDLER(name)
Use it!
Change-Id: I0e5385cb54197c743348f0d2ce215c93b8e396a4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6786
Tested-by: jenkins
On 2008-03-05, before git's age, commit 6d95014674 adds a
comment about unobserved ACK supposedly sent by GDB at connection.
The ACK is sent since GDB 3.95 (1999-05-04), but a bug introduced
in GDB 6.5 (2006-06-21) and fixed in GDB 7.0 (2009-10-06) makes
GDB sending the query for "supported packets" before sending the
ACK. Due to the bug, the author of the commit failed to see the
ACK.
Change-Id: I574a8013e7d159d1c71087af83b7c2ce92be86bd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6769
Tested-by: jenkins
The command sleep holds the host CPU until it completes.
Send keep_alive to GDB, so it will not timeout.
Change-Id: I92e9c5fc871b4e6a7695cdc449ca9fb3c1f1d9ec
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6770
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Unlike cortex_m_load_core_reg_u32() storing core register uses
the same code pattern around DHCSR read as offered by the convenience
helper cortex_m_read_dhcsr_atomic_sticky().
Use the helper.
Change-Id: Ia947204944a8b549f3c2be7fb2f717aad18970c4
SeeAlso: 65d7629183 (cortex_m: poll S_REGRDY on register r/w)
SeeAlso: 0dcf95c717 (target/cortex_m: cumulate DHCSR sticky bits)
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6767
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Close libusb context in vsllink_quit()
Change-Id: I85da8d7228b1b2b033a32b2f9ae9ed0726546b55
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6766
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Also rename ftdi_oscan1_mode command which only exists in our branch.
Change-Id: Ie9b28f228b1fd984244edb8162d552104d28e462
Signed-off-by: Tim Newsome <tim@sifive.com>
It requires libusb, and I'm not off-hand seeing a 32-bit libusb to link
with.
Change-Id: Ib676982b9c17369326ffc63eab5ef895add48569
Signed-off-by: Tim Newsome <tim@sifive.com>
1Gbit SPI flash on VCU118 Rev. 2.0
Contributed to riscv-openocd in https://github.com/riscv/riscv-openocd/pull/487
Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: I93447dd970d9901a671567fe8ab9e407432f8db9
Reviewed-on: https://review.openocd.org/c/openocd/+/6764
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Change [1] introduced a regression that results in comparison
in arm_jtag_set_instr() to be always true if the length of the
IR register is not 8 bit. The value on the left side
of the != operator contains only tap->ir_length number of
bits while value on the right is full 8-bit instruction code.
This forces OpenOCD to update the JTAG IR register on each
transaction even if the instruction in the JTAG IR register
is correct. This causes noticeable performance degradation,
especially with slow JTAG adapters.
[1] https://review.openocd.org/c/openocd/+/6285
time ./src/openocd -s tcl/ -f interface/cmsis-dap.cfg \
-c "transport select jtag" -f target/psoc6.cfg \
-c "init; load_image data.bin 0x08000000; exit"
Without this change:
real 0m4,863s
user 0m0,074s
sys 0m0,128s
With this change:
real 0m3,083s
user 0m0,038s
sys 0m0,098s
Signed-off-by: Bohdan Tymkiv <bohdan200@gmail.com>
Change-Id: Iaded83a04ecc7e65f18256afae582267ccc1fc59
Reviewed-on: https://review.openocd.org/c/openocd/+/6762
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Allow passing optional gpiochip number before gpio number.
If no optional chip number is passed, the one from the 'gpiochip'
configuration directive is used.
Change-Id: I16933d81581d9af4d1600c5f9fdbc832ef3fda94
Signed-off-by: Laszlo Sitzer <dlsitzer@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6742
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This board is (software wise) similar to the existing SAME54 Xplained
Pro board, with just a slightly different MCU. (Hardware wise, it
features a vastly different form factor.)
Signed-off-by: Jörg Wunsch <openocd@uriah.heep.sax.de>
Change-Id: I5e5435d49d333fb74471994ee84de59ed983153c
Reviewed-on: https://review.openocd.org/c/openocd/+/6747
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Axel W.
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
- "riscv set_prefer_sba" - removed from the doc, superseded
by the latter
- "riscv set_mem_access" - new command, new entry added
into the doc
This change only addresses the documentation. The corresponding
implementation of the RISC-V commands is already merged.
Change-Id: I3c07672cde94324407cf667504dba5402f63a543
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6743
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
These commands were extended/improved in the last drop
of RISC-V target updates. Update also the documentation
to properly describe how the commands should be used now.
Change-Id: I9e2ba6adbe1a4c032b96f5f8ff2d4791fa4c2527
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6738
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Document both find and ocd_find command under Config File Guidelines
-> Interface Config Files. find command is used in the previous
section as well but the previous section is more about using OpenOCD.
The section added is "aimed at any user who needs to write a config
file".
Change-Id: I698207fe58d564c615a15b50756aa5547a5f40b7
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6737
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Document "command mode" command Server Configuration -> Configuration
Stage. The text is taken from command's help string.
In addition to the help string, this commit explain the words
mismatch, the doc uses "stage" but the command and source code uses
"mode" to describe the same thing.
Change-Id: I1d5fc8c64a3a0b07ea8430bf016bcbd54e52da1c
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6736
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
ARM IHI 0031A does not support SWJ-DP, so no switch between JTAG
and SWD is considered.
ARM IHI 0031B is not publicly available and it's reported as
"Confidential Beta" in the history list in following doc versions.
From ARM IHI 0031C the direct switch between JTAG and SWD is
already deprecated in favor of passing through dormant mode. With
no access to IHI 0031B we haven't info if any device strictly
requires the direct switch.
OpenOCD implements only the deprecated direct switch, so changing
it could cause regression on devices that do not implement dormant
mode.
Plus, not all the adapters support dormant mode.
Nevertheless there are already target devices that only allow
entering in SWD by passing through dormant.
Let the code try both method, alternating one tentative with the
deprecated legacy direct switch, then another tentative passing
through dormant, and repeat till timeout.
This would work on any device that don't support dormant, on new
devices that require switch through dormant and will work with
adapters that don't support dormant.
Change-Id: Ib8619635277d497872079a33fa4e38be9beb84a0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6695
Tested-by: jenkins
The function debugport_init() has never existed in OpenOCD code,
but few comments erroneously references it in place of the
existing function ahbap_debugport_init().
Commit 00dbc185ee ("arm_adi_v5: Split ahbap_debugport_init")
splits the function ahbap_debugport_init() in dap_dp_init() and
mem_ap_init(), but did not removed all the incorrect comments
about debugport_init(). Few of such comments has been removed in
later patches.
Remove the last comment that references debugport_init().
Change-Id: Ibd1f125475386e5653340fedf706903a0ee15897
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6694
Tested-by: jenkins
Added and improved several prints related to the GDB connection
and various error states that may occur in relation to this
connection.
Change-Id: I233246190b613cc925b783561cfa3aa5267360fd
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6288
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Standard C library free() allows NULL pointer as a parameter.
Change target_free_working_area() to conform this convention.
Remove NULL pointer tests before target_free_working_area() calls.
While on it add missing setting pointer to NULL after target_free_working_area().
Change-Id: I7c692ab04a9933398ba5bc614723ad0bdecb87b3
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6712
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Move more smarts into the target algorithm code, and rewrite that in C
so it's easier to understand/maintain.
* Support >24-bit addresses.
* Check for errors.
Change-Id: I3b1a143589fe6defafb8f95820aa682acc9646e7
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6679
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Document usage command under General Commands -> Server Commands. The
text is taken from the command's help string.
Change-Id: I957cb46cca98181c3c5e676228c5c103e47bb655
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6735
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Document add_help_text and add_usage_text under Genral Commands ->
Misc Commands. The text are taken from command's help strings.
Change-Id: I2bbbee8e5faa8d9654227c304e0528f5144275e8
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6734
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The command is a stub only, does nothing.
Change-Id: Ib3b8c2122a9f6f2e179bee34ac56d0adf367bfcc
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6730
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The command might be a leftover from development of the driver.
There is no documentation what it does.
Change-Id: Iaa5aa1ac51638bd6acce172a5dd03846a165dc27
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6728
Tested-by: jenkins
Reviewed-by: Ivan-Artekit <ivan@artekit.eu>
Add help texts from similar driver kinetis.c
While on it fix one existing help: the flash is obviously not NAND
Change-Id: Ibd295105586b008aaabf2fb4e4a75bf551266e38
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6727
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The stm32mp13x has one core Cortex-A7.
The board Discovery Kit includes an on-board STLink-V3 with SWD
connection.
The webpage of the board is not active yet.
Change-Id: I8836b26612a160ead79766955ebefaf3d21a329c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6675
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Don't reexamine targets until we're past the examine stage of init().
Earlier than that, examine() will likely fail because the scan chain
hasn't been examined yet.
This will likely fix#663.
Change-Id: I76ee9181f35cedcdb1a3e0f8ac33ab361c68d3af
Signed-off-by: Tim Newsome <tim@sifive.com>
The EFM32 flash driver misidentifies the EFR32BG1B on my board as EFR32MG1B.
Looks like this was caused by a copy-paste error, fixed.
Signed-off-by: Doug Brunner <doug.a.brunner@gmail.com>
Change-Id: I3067f7ba132c2562487da8c2371f63a4843230c1
Reviewed-on: https://review.openocd.org/c/openocd/+/6666
Tested-by: jenkins
Reviewed-by: Fredrik Hederstierna <fredrik.hederstierna@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Antonio Borneo
Doug Brunner
Tim Newsome
Marc Schink
Tomas Vanek
Jaehoon Park
Bohdan Tymkiv
Laszlo Sitzer
Joerg Wunsch
Jan Matyas
Yasushi SHOJI