interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

target: add kl25z HLA (stlink) config 

Based on Nemuisan Tokusei's. Untested, but original config was reported
to work ok.

Change-Id: Ic991dce55bfca266880081fe2bbd9e6e263b0fc0
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1803
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
This commit is contained in:
Paul Fertser 2013-11-07 23:26:45 +04:00 committed by Spencer Oliver
parent 03e9729043
commit da7f048104
1 changed files with 55 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

55
tcl/target/kl25z_hla.cfg Normal file
View File

@ -0,0 +1,55 @@
# MKL25Z128VLK4
# FreeScale Cortex-M0plus with 128kB Flash and 16kB Local On-Chip SRAM
if { [info exists CHIPNAME] == 0 } {
set _CHIPNAME kl25z
}
if { [info exists CPUTAPID] == 0 } {
set _CPUTAPID 0x0BC11477
}
if { [info exists WORKAREASIZE] == 0 } {
set _WORKAREASIZE 0x3000
}
if { [info exists TRANSPORT] == 0 } {
set _TRANSPORT hla_swd
}
transport select $_TRANSPORT
hla newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME hla_target -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
flash bank pflash kinetis 0x00000000 0x20000 0 4 $_TARGETNAME
proc kl25z_enable_pll {} {
echo "KL25Z: Enabling PLL"
# SIM->CLKDIV1 = (uint32_t)0x00020000UL; /* Update system prescalers */
mww 0x40048044 0x00020000
# /* Switch to FEI Mode */
# MCG->C1 = (uint8_t)0x06U;
mwb 0x40064000 0x06
# MCG->C2 = (uint8_t)0x00U;
mwb 0x40064001 0x00
# /* MCG->C4: DMX32=0,DRST_DRS=1 */
# MCG->C4 = (uint8_t)((MCG->C4 & (uint8_t)~(uint8_t)0xC0U) | (uint8_t)0x20U);
mwb 0x40064003 0x37
#OSC0->CR = (uint8_t)0x80U;
mwb 0x40065000 0x80
# MCG->C5 = (uint8_t)0x00U;
mwb 0x40064004 0x00
# MCG->C6 = (uint8_t)0x00U;
mwb 0x40064005 0x00
sleep 100
}
$_TARGETNAME configure -event reset-init {
kl25z_enable_pll
}