Restore normal development cycle
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
This commit is contained in:
Paul Fertser
parent
ca218832bb
commit
8fa67bd57d
80
NEWS
80
NEWS
|
|
@ -2,105 +2,27 @@ This file includes highlights of the changes made in the OpenOCD
|
||||||
source archive release.
|
source archive release.
|
||||||
|
|
||||||
JTAG Layer:
|
JTAG Layer:
|
||||||
* New CMSIS-DAP driver
|
|
||||||
* Andes AICE debug adapter support
|
|
||||||
* New OpenJTAG driver
|
|
||||||
* New BCM2835 (RaspberryPi) driver
|
|
||||||
* JTAG VPI client driver (for OpenRISC Reference Platform SoC)
|
|
||||||
* Xilinx BSCAN_* for OpenRISC support
|
|
||||||
* ST-LINKv2-1 support
|
|
||||||
* ST-LINKv2 SWO tracing support (UART emulation)
|
|
||||||
* JLink-OB (onboard) support
|
|
||||||
* Altera USB Blaster driver rewrite, initial Blaster II
|
|
||||||
support
|
|
||||||
* ULINK driver ported to libusb-1.0, OpenULINK build fixes
|
|
||||||
* Support up to 64 bit IR lengths
|
|
||||||
* SVF playback (FPGA programming) fixes
|
|
||||||
* "ftdi" interface driver got extensive testing and is now
|
|
||||||
recommended over the old ft2232 implementation
|
|
||||||
|
|
||||||
Boundary Scan:
|
Boundary Scan:
|
||||||
|
|
||||||
Target Layer:
|
Target Layer:
|
||||||
* New target: Andes nds32
|
|
||||||
* New target: OpenRISC OR1K
|
|
||||||
* New target: Intel Quark X10xx
|
|
||||||
* MIPS EJTAG 1.5/2.0 support
|
|
||||||
* MIPS speed improvements
|
|
||||||
* Cortex-M, Cortex-A (MEM-AP, APB-AP) targets working with BE
|
|
||||||
hosts now
|
|
||||||
* XScale vector_catch support, reset fixes
|
|
||||||
* dsp563xx ad-hoc breakpoint/watchpoint support
|
|
||||||
* RTOS support for embKernel
|
|
||||||
* Target profiling improvements
|
|
||||||
* Memory access functions testbench
|
|
||||||
|
|
||||||
Flash Layer:
|
Flash Layer:
|
||||||
* STM32 family sync with reference manuals, other bugfixes
|
|
||||||
* STM32F401, STM32F07x support
|
|
||||||
* Atmel SAM4L, SAMG5x support
|
|
||||||
* at91sam3sd8{a,b}, at91sam3s8{a,b,c}, at91sam4s,
|
|
||||||
at91sam3n0{a,b,0a,0b} support, bugfixes
|
|
||||||
* Atmel SAMD support
|
|
||||||
* Milandr 1986ВЕ* support
|
|
||||||
* Kinetis KL, K21 support
|
|
||||||
* Nuvoton NuMicro MINI5{1,2,4} support
|
|
||||||
* Nuvoton NUC910 series support
|
|
||||||
* NXP LPC43xx, LPC2000 fixes
|
|
||||||
* NXP LPC800, LPC810 support
|
|
||||||
* More ATmega parts supported
|
|
||||||
* Fujitsu MB9Ax family support
|
|
||||||
* EFM32 Wonder Gecko family support
|
|
||||||
* Nordic nRF51 support
|
|
||||||
|
|
||||||
Board, Target, and Interface Configuration Scripts:
|
Board, Target, and Interface Configuration Scripts:
|
||||||
* STM32W108xx generic target config
|
|
||||||
* STM32F429 discovery board config
|
|
||||||
* STM32 Nucleo boards configs
|
|
||||||
* DENX M53EVK board config
|
|
||||||
* Altera Cyclone V SoC, SoCkit config
|
|
||||||
* New TI Launchpads board configs
|
|
||||||
* TI am43xx devices, AM437x GP EVM, AM438x ePOS EVM board
|
|
||||||
configs
|
|
||||||
* Marvell Armada 370 family initial support
|
|
||||||
* TI TMDX570LS31USB (TMS570, Cortex-R4) support scripts
|
|
||||||
* Freescale FRDM-KL25Z, KL46Z board configs
|
|
||||||
* Digilent Zedboard config
|
|
||||||
* Asus RT-N16, Linksys WRT54GL, BT HomeHub board configs
|
|
||||||
* Atmel Xplained initial support
|
|
||||||
* Broadcom bcm28155_ap board config
|
|
||||||
* TUMPA, TUMPA Lite interface configs
|
|
||||||
* Digilent JTAG-SMT2 interface config
|
|
||||||
* New RAM testing functions
|
|
||||||
* Easy-to-use firmware recovery helpers targetting ordinary
|
|
||||||
users with common equipment
|
|
||||||
|
|
||||||
Server Layer:
|
Server Layer:
|
||||||
* Auto-generation of GDB target description for ARMv7-M,
|
|
||||||
ARM4, nds32, OR1K, Quark
|
|
||||||
* GDB File-I/O Remote Protocol extension support
|
|
||||||
* Default GDB flashing events handlers to initialise and reset
|
|
||||||
the target automatically when "load" is used
|
|
||||||
|
|
||||||
Documentation:
|
Documentation:
|
||||||
* Extensive README* changes
|
|
||||||
* The official User's Guide was proofread
|
|
||||||
* Example cross-build script
|
|
||||||
* RTOS documentation improvements
|
|
||||||
* Tcl RPC documentation and examples added
|
|
||||||
|
|
||||||
Build and Release:
|
Build and Release:
|
||||||
* *BSD, OS X, clang, ARM, windows build fixes
|
|
||||||
* New pkg-config support changes the way libusb (and other
|
|
||||||
dependencies) are handled. Many adapter drivers are now
|
|
||||||
selected automatically during the configure stage.
|
|
||||||
|
|
||||||
|
|
||||||
This release also contains a number of other important functional and
|
This release also contains a number of other important functional and
|
||||||
cosmetic bugfixes. For more details about what has changed since the
|
cosmetic bugfixes. For more details about what has changed since the
|
||||||
last release, see the git repository history:
|
last release, see the git repository history:
|
||||||
|
|
||||||
http://sourceforge.net/p/openocd/code/ci/v0.8.0/log/?path=
|
http://sourceforge.net/p/openocd/code/ci/v0.9.0/log/?path=
|
||||||
|
|
||||||
|
|
||||||
For older NEWS, see the NEWS files associated with each release
|
For older NEWS, see the NEWS files associated with each release
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,111 @@
|
||||||
|
This file includes highlights of the changes made in the OpenOCD
|
||||||
|
source archive release.
|
||||||
|
|
||||||
|
JTAG Layer:
|
||||||
|
* New CMSIS-DAP driver
|
||||||
|
* Andes AICE debug adapter support
|
||||||
|
* New OpenJTAG driver
|
||||||
|
* New BCM2835 (RaspberryPi) driver
|
||||||
|
* JTAG VPI client driver (for OpenRISC Reference Platform SoC)
|
||||||
|
* Xilinx BSCAN_* for OpenRISC support
|
||||||
|
* ST-LINKv2-1 support
|
||||||
|
* ST-LINKv2 SWO tracing support (UART emulation)
|
||||||
|
* JLink-OB (onboard) support
|
||||||
|
* Altera USB Blaster driver rewrite, initial Blaster II
|
||||||
|
support
|
||||||
|
* ULINK driver ported to libusb-1.0, OpenULINK build fixes
|
||||||
|
* Support up to 64 bit IR lengths
|
||||||
|
* SVF playback (FPGA programming) fixes
|
||||||
|
* "ftdi" interface driver got extensive testing and is now
|
||||||
|
recommended over the old ft2232 implementation
|
||||||
|
|
||||||
|
Boundary Scan:
|
||||||
|
|
||||||
|
Target Layer:
|
||||||
|
* New target: Andes nds32
|
||||||
|
* New target: OpenRISC OR1K
|
||||||
|
* New target: Intel Quark X10xx
|
||||||
|
* MIPS EJTAG 1.5/2.0 support
|
||||||
|
* MIPS speed improvements
|
||||||
|
* Cortex-M, Cortex-A (MEM-AP, APB-AP) targets working with BE
|
||||||
|
hosts now
|
||||||
|
* XScale vector_catch support, reset fixes
|
||||||
|
* dsp563xx ad-hoc breakpoint/watchpoint support
|
||||||
|
* RTOS support for embKernel
|
||||||
|
* Target profiling improvements
|
||||||
|
* Memory access functions testbench
|
||||||
|
|
||||||
|
Flash Layer:
|
||||||
|
* STM32 family sync with reference manuals, other bugfixes
|
||||||
|
* STM32F401, STM32F07x support
|
||||||
|
* Atmel SAM4L, SAMG5x support
|
||||||
|
* at91sam3sd8{a,b}, at91sam3s8{a,b,c}, at91sam4s,
|
||||||
|
at91sam3n0{a,b,0a,0b} support, bugfixes
|
||||||
|
* Atmel SAMD support
|
||||||
|
* Milandr 1986ВЕ* support
|
||||||
|
* Kinetis KL, K21 support
|
||||||
|
* Nuvoton NuMicro MINI5{1,2,4} support
|
||||||
|
* Nuvoton NUC910 series support
|
||||||
|
* NXP LPC43xx, LPC2000 fixes
|
||||||
|
* NXP LPC800, LPC810 support
|
||||||
|
* More ATmega parts supported
|
||||||
|
* Fujitsu MB9Ax family support
|
||||||
|
* EFM32 Wonder Gecko family support
|
||||||
|
* Nordic nRF51 support
|
||||||
|
|
||||||
|
Board, Target, and Interface Configuration Scripts:
|
||||||
|
* STM32W108xx generic target config
|
||||||
|
* STM32F429 discovery board config
|
||||||
|
* STM32 Nucleo boards configs
|
||||||
|
* DENX M53EVK board config
|
||||||
|
* Altera Cyclone V SoC, SoCkit config
|
||||||
|
* New TI Launchpads board configs
|
||||||
|
* TI am43xx devices, AM437x GP EVM, AM438x ePOS EVM board
|
||||||
|
configs
|
||||||
|
* Marvell Armada 370 family initial support
|
||||||
|
* TI TMDX570LS31USB (TMS570, Cortex-R4) support scripts
|
||||||
|
* Freescale FRDM-KL25Z, KL46Z board configs
|
||||||
|
* Digilent Zedboard config
|
||||||
|
* Asus RT-N16, Linksys WRT54GL, BT HomeHub board configs
|
||||||
|
* Atmel Xplained initial support
|
||||||
|
* Broadcom bcm28155_ap board config
|
||||||
|
* TUMPA, TUMPA Lite interface configs
|
||||||
|
* Digilent JTAG-SMT2 interface config
|
||||||
|
* New RAM testing functions
|
||||||
|
* Easy-to-use firmware recovery helpers targetting ordinary
|
||||||
|
users with common equipment
|
||||||
|
|
||||||
|
Server Layer:
|
||||||
|
* Auto-generation of GDB target description for ARMv7-M,
|
||||||
|
ARM4, nds32, OR1K, Quark
|
||||||
|
* GDB File-I/O Remote Protocol extension support
|
||||||
|
* Default GDB flashing events handlers to initialise and reset
|
||||||
|
the target automatically when "load" is used
|
||||||
|
|
||||||
|
Documentation:
|
||||||
|
* Extensive README* changes
|
||||||
|
* The official User's Guide was proofread
|
||||||
|
* Example cross-build script
|
||||||
|
* RTOS documentation improvements
|
||||||
|
* Tcl RPC documentation and examples added
|
||||||
|
|
||||||
|
Build and Release:
|
||||||
|
* *BSD, OS X, clang, ARM, windows build fixes
|
||||||
|
* New pkg-config support changes the way libusb (and other
|
||||||
|
dependencies) are handled. Many adapter drivers are now
|
||||||
|
selected automatically during the configure stage.
|
||||||
|
|
||||||
|
|
||||||
|
This release also contains a number of other important functional and
|
||||||
|
cosmetic bugfixes. For more details about what has changed since the
|
||||||
|
last release, see the git repository history:
|
||||||
|
|
||||||
|
http://sourceforge.net/p/openocd/code/ci/v0.8.0/log/?path=
|
||||||
|
|
||||||
|
|
||||||
|
For older NEWS, see the NEWS files associated with each release
|
||||||
|
(i.e. NEWS-<version>).
|
||||||
|
|
||||||
|
For more information about contributing test reports, bug fixes, or new
|
||||||
|
features and device support, please read the new Developer Manual (or
|
||||||
|
the BUGS and PATCHES.txt files in the source archive).
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
AC_PREREQ(2.64)
|
AC_PREREQ(2.64)
|
||||||
AC_INIT([openocd], [0.8.0],
|
AC_INIT([openocd], [0.9.0-dev],
|
||||||
[OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
|
[OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
|
||||||
AC_CONFIG_SRCDIR([src/openocd.c])
|
AC_CONFIG_SRCDIR([src/openocd.c])
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue