From 8fa67bd57dba0f43ead29fe26d10044b24023649 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Sun, 27 Apr 2014 15:07:08 +0400 Subject: [PATCH] Restore normal development cycle Signed-off-by: Paul Fertser --- NEWS | 80 +------------------------------------ NEWS-0.8.0 | 111 +++++++++++++++++++++++++++++++++++++++++++++++++++ configure.ac | 2 +- 3 files changed, 113 insertions(+), 80 deletions(-) create mode 100644 NEWS-0.8.0 diff --git a/NEWS b/NEWS index 33b3af401..6ad081edf 100644 --- a/NEWS +++ b/NEWS @@ -2,105 +2,27 @@ This file includes highlights of the changes made in the OpenOCD source archive release. JTAG Layer: - * New CMSIS-DAP driver - * Andes AICE debug adapter support - * New OpenJTAG driver - * New BCM2835 (RaspberryPi) driver - * JTAG VPI client driver (for OpenRISC Reference Platform SoC) - * Xilinx BSCAN_* for OpenRISC support - * ST-LINKv2-1 support - * ST-LINKv2 SWO tracing support (UART emulation) - * JLink-OB (onboard) support - * Altera USB Blaster driver rewrite, initial Blaster II - support - * ULINK driver ported to libusb-1.0, OpenULINK build fixes - * Support up to 64 bit IR lengths - * SVF playback (FPGA programming) fixes - * "ftdi" interface driver got extensive testing and is now - recommended over the old ft2232 implementation Boundary Scan: Target Layer: - * New target: Andes nds32 - * New target: OpenRISC OR1K - * New target: Intel Quark X10xx - * MIPS EJTAG 1.5/2.0 support - * MIPS speed improvements - * Cortex-M, Cortex-A (MEM-AP, APB-AP) targets working with BE - hosts now - * XScale vector_catch support, reset fixes - * dsp563xx ad-hoc breakpoint/watchpoint support - * RTOS support for embKernel - * Target profiling improvements - * Memory access functions testbench Flash Layer: - * STM32 family sync with reference manuals, other bugfixes - * STM32F401, STM32F07x support - * Atmel SAM4L, SAMG5x support - * at91sam3sd8{a,b}, at91sam3s8{a,b,c}, at91sam4s, - at91sam3n0{a,b,0a,0b} support, bugfixes - * Atmel SAMD support - * Milandr 1986ВЕ* support - * Kinetis KL, K21 support - * Nuvoton NuMicro MINI5{1,2,4} support - * Nuvoton NUC910 series support - * NXP LPC43xx, LPC2000 fixes - * NXP LPC800, LPC810 support - * More ATmega parts supported - * Fujitsu MB9Ax family support - * EFM32 Wonder Gecko family support - * Nordic nRF51 support Board, Target, and Interface Configuration Scripts: - * STM32W108xx generic target config - * STM32F429 discovery board config - * STM32 Nucleo boards configs - * DENX M53EVK board config - * Altera Cyclone V SoC, SoCkit config - * New TI Launchpads board configs - * TI am43xx devices, AM437x GP EVM, AM438x ePOS EVM board - configs - * Marvell Armada 370 family initial support - * TI TMDX570LS31USB (TMS570, Cortex-R4) support scripts - * Freescale FRDM-KL25Z, KL46Z board configs - * Digilent Zedboard config - * Asus RT-N16, Linksys WRT54GL, BT HomeHub board configs - * Atmel Xplained initial support - * Broadcom bcm28155_ap board config - * TUMPA, TUMPA Lite interface configs - * Digilent JTAG-SMT2 interface config - * New RAM testing functions - * Easy-to-use firmware recovery helpers targetting ordinary - users with common equipment Server Layer: - * Auto-generation of GDB target description for ARMv7-M, - ARM4, nds32, OR1K, Quark - * GDB File-I/O Remote Protocol extension support - * Default GDB flashing events handlers to initialise and reset - the target automatically when "load" is used Documentation: - * Extensive README* changes - * The official User's Guide was proofread - * Example cross-build script - * RTOS documentation improvements - * Tcl RPC documentation and examples added Build and Release: - * *BSD, OS X, clang, ARM, windows build fixes - * New pkg-config support changes the way libusb (and other - dependencies) are handled. Many adapter drivers are now - selected automatically during the configure stage. This release also contains a number of other important functional and cosmetic bugfixes. For more details about what has changed since the last release, see the git repository history: -http://sourceforge.net/p/openocd/code/ci/v0.8.0/log/?path= +http://sourceforge.net/p/openocd/code/ci/v0.9.0/log/?path= For older NEWS, see the NEWS files associated with each release diff --git a/NEWS-0.8.0 b/NEWS-0.8.0 new file mode 100644 index 000000000..33b3af401 --- /dev/null +++ b/NEWS-0.8.0 @@ -0,0 +1,111 @@ +This file includes highlights of the changes made in the OpenOCD +source archive release. + +JTAG Layer: + * New CMSIS-DAP driver + * Andes AICE debug adapter support + * New OpenJTAG driver + * New BCM2835 (RaspberryPi) driver + * JTAG VPI client driver (for OpenRISC Reference Platform SoC) + * Xilinx BSCAN_* for OpenRISC support + * ST-LINKv2-1 support + * ST-LINKv2 SWO tracing support (UART emulation) + * JLink-OB (onboard) support + * Altera USB Blaster driver rewrite, initial Blaster II + support + * ULINK driver ported to libusb-1.0, OpenULINK build fixes + * Support up to 64 bit IR lengths + * SVF playback (FPGA programming) fixes + * "ftdi" interface driver got extensive testing and is now + recommended over the old ft2232 implementation + +Boundary Scan: + +Target Layer: + * New target: Andes nds32 + * New target: OpenRISC OR1K + * New target: Intel Quark X10xx + * MIPS EJTAG 1.5/2.0 support + * MIPS speed improvements + * Cortex-M, Cortex-A (MEM-AP, APB-AP) targets working with BE + hosts now + * XScale vector_catch support, reset fixes + * dsp563xx ad-hoc breakpoint/watchpoint support + * RTOS support for embKernel + * Target profiling improvements + * Memory access functions testbench + +Flash Layer: + * STM32 family sync with reference manuals, other bugfixes + * STM32F401, STM32F07x support + * Atmel SAM4L, SAMG5x support + * at91sam3sd8{a,b}, at91sam3s8{a,b,c}, at91sam4s, + at91sam3n0{a,b,0a,0b} support, bugfixes + * Atmel SAMD support + * Milandr 1986ВЕ* support + * Kinetis KL, K21 support + * Nuvoton NuMicro MINI5{1,2,4} support + * Nuvoton NUC910 series support + * NXP LPC43xx, LPC2000 fixes + * NXP LPC800, LPC810 support + * More ATmega parts supported + * Fujitsu MB9Ax family support + * EFM32 Wonder Gecko family support + * Nordic nRF51 support + +Board, Target, and Interface Configuration Scripts: + * STM32W108xx generic target config + * STM32F429 discovery board config + * STM32 Nucleo boards configs + * DENX M53EVK board config + * Altera Cyclone V SoC, SoCkit config + * New TI Launchpads board configs + * TI am43xx devices, AM437x GP EVM, AM438x ePOS EVM board + configs + * Marvell Armada 370 family initial support + * TI TMDX570LS31USB (TMS570, Cortex-R4) support scripts + * Freescale FRDM-KL25Z, KL46Z board configs + * Digilent Zedboard config + * Asus RT-N16, Linksys WRT54GL, BT HomeHub board configs + * Atmel Xplained initial support + * Broadcom bcm28155_ap board config + * TUMPA, TUMPA Lite interface configs + * Digilent JTAG-SMT2 interface config + * New RAM testing functions + * Easy-to-use firmware recovery helpers targetting ordinary + users with common equipment + +Server Layer: + * Auto-generation of GDB target description for ARMv7-M, + ARM4, nds32, OR1K, Quark + * GDB File-I/O Remote Protocol extension support + * Default GDB flashing events handlers to initialise and reset + the target automatically when "load" is used + +Documentation: + * Extensive README* changes + * The official User's Guide was proofread + * Example cross-build script + * RTOS documentation improvements + * Tcl RPC documentation and examples added + +Build and Release: + * *BSD, OS X, clang, ARM, windows build fixes + * New pkg-config support changes the way libusb (and other + dependencies) are handled. Many adapter drivers are now + selected automatically during the configure stage. + + +This release also contains a number of other important functional and +cosmetic bugfixes. For more details about what has changed since the +last release, see the git repository history: + +http://sourceforge.net/p/openocd/code/ci/v0.8.0/log/?path= + + +For older NEWS, see the NEWS files associated with each release +(i.e. NEWS-). + +For more information about contributing test reports, bug fixes, or new +features and device support, please read the new Developer Manual (or +the BUGS and PATCHES.txt files in the source archive). diff --git a/configure.ac b/configure.ac index 27fdb2cac..1b4870eef 100644 --- a/configure.ac +++ b/configure.ac @@ -1,5 +1,5 @@ AC_PREREQ(2.64) -AC_INIT([openocd], [0.8.0], +AC_INIT([openocd], [0.9.0-dev], [OpenOCD Mailing List ]) AC_CONFIG_SRCDIR([src/openocd.c])