interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge branch 'riscv' into hwthread

This commit is contained in:
Tim Newsome 2019-01-25 14:17:32 -08:00
parent 82cf37d36c eb7af6cba0
commit 49dd7ded87
5 changed files with 255 additions and 136 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
doc/openocd.texi
View File

@ -9145,6 +9145,17 @@ When on, prefer to use System Bus Access to access memory. When off, prefer to
use the Program Buffer to access memory.
@end deffn
@deffn Command {riscv set_ir} (@option{idcode}|@option{dtmcs}|@option{dmi}) [value]
Set the IR value for the specified JTAG register. This is useful, for
example, when using the existing JTAG interface on a Xilinx FPGA by
way of BSCANE2 primitives that only permit a limited selection of IR
values.
When utilizing version 0.11 of the RISC-V Debug Specification,
@option{dtmcs} and @option{dmi} set the IR values for the DTMCONTROL
and DBUS registers, respectively.
@end deffn
@subsection RISC-V Authentication Commands
The following commands can be used to authenticate to a RISC-V system. Eg. a

9
src/target/riscv/riscv-011.c
View File

@ -358,6 +358,15 @@ static void add_dbus_scan(const struct target *target, struct scan_field *field,
uint16_t address, uint64_t data)
{
riscv011_info_t *info = get_info(target);
RISCV_INFO(r);
if (r->reset_delays_wait >= 0) {
r->reset_delays_wait--;
if (r->reset_delays_wait < 0) {
info->dbus_busy_delay = 0;
info->interrupt_high_delay = 0;
}
}
field->num_bits = info->addrbits + DBUS_OP_SIZE + DBUS_DATA_SIZE;
field->in_value = in_value;

296
src/target/riscv/riscv-013.c
View File

@ -177,7 +177,7 @@ typedef struct {
/* Number of run-test/idle cycles the target requests we do after each dbus
* access. */
unsigned int dtmcontrol_idle;
unsigned int dtmcs_idle;
/* This value is incremented every time a dbus access comes back as "busy".
* It's used to determine how many run-test/idle cycles to feed the target
@ -396,16 +396,7 @@ static void dump_field(int idle, const struct scan_field *field)
static void select_dmi(struct target *target)
{
static uint8_t ir_dmi[1] = {DTM_DMI};
struct scan_field field = {
.num_bits = target->tap->ir_length,
.out_value = ir_dmi,
.in_value = NULL,
.check_value = NULL,
.check_mask = NULL
};
jtag_add_ir_scan(target->tap, &field, TAP_IDLE);
jtag_add_ir_scan(target->tap, &select_dbus, TAP_IDLE);
}
static uint32_t dtmcontrol_scan(struct target *target, uint32_t out)
@ -442,8 +433,8 @@ static void increase_dmi_busy_delay(struct target *target)
{
riscv013_info_t *info = get_info(target);
info->dmi_busy_delay += info->dmi_busy_delay / 10 + 1;
LOG_DEBUG("dtmcontrol_idle=%d, dmi_busy_delay=%d, ac_busy_delay=%d",
info->dtmcontrol_idle, info->dmi_busy_delay,
LOG_DEBUG("dtmcs_idle=%d, dmi_busy_delay=%d, ac_busy_delay=%d",
info->dtmcs_idle, info->dmi_busy_delay,
info->ac_busy_delay);
dtmcontrol_scan(target, DTM_DTMCS_DMIRESET);
@ -458,6 +449,7 @@ static dmi_status_t dmi_scan(struct target *target, uint32_t *address_in,
bool exec)
{
riscv013_info_t *info = get_info(target);
RISCV_INFO(r);
unsigned num_bits = info->abits + DTM_DMI_OP_LENGTH + DTM_DMI_DATA_LENGTH;
size_t num_bytes = (num_bits + 7) / 8;
uint8_t in[num_bytes];
@ -468,6 +460,14 @@ static dmi_status_t dmi_scan(struct target *target, uint32_t *address_in,
.in_value = in
};
if (r->reset_delays_wait >= 0) {
r->reset_delays_wait--;
if (r->reset_delays_wait < 0) {
info->dmi_busy_delay = 0;
info->ac_busy_delay = 0;
}
}
memset(in, 0, num_bytes);
assert(info->abits != 0);
@ -503,14 +503,20 @@ static dmi_status_t dmi_scan(struct target *target, uint32_t *address_in,
return buf_get_u32(in, DTM_DMI_OP_OFFSET, DTM_DMI_OP_LENGTH);
}
static int dmi_op_timeout(struct target *target, uint32_t *data_in, int dmi_op,
uint32_t address, uint32_t data_out, int timeout_sec)
/* If dmi_busy_encountered is non-NULL, this function will use it to tell the
* caller whether DMI was ever busy during this call. */
static int dmi_op_timeout(struct target *target, uint32_t *data_in,
bool *dmi_busy_encountered, int dmi_op, uint32_t address,
uint32_t data_out, int timeout_sec, bool exec)
{
select_dmi(target);
dmi_status_t status;
uint32_t address_in;
if (dmi_busy_encountered)
*dmi_busy_encountered = false;
const char *op_name;
switch (dmi_op) {
case DMI_OP_NOP:
@ -532,9 +538,11 @@ static int dmi_op_timeout(struct target *target, uint32_t *data_in, int dmi_op,
* stays busy, it is actually due to the previous access. */
while (1) {
status = dmi_scan(target, NULL, NULL, dmi_op, address, data_out,
false);
exec);
if (status == DMI_STATUS_BUSY) {
increase_dmi_busy_delay(target);
if (dmi_busy_encountered)
*dmi_busy_encountered = true;
} else if (status == DMI_STATUS_SUCCESS) {
break;
} else {
@ -583,11 +591,12 @@ static int dmi_op_timeout(struct target *target, uint32_t *data_in, int dmi_op,
return ERROR_OK;
}
static int dmi_op(struct target *target, uint32_t *data_in, int dmi_op,
uint32_t address, uint32_t data_out)
static int dmi_op(struct target *target, uint32_t *data_in,
bool *dmi_busy_encountered, int dmi_op, uint32_t address,
uint32_t data_out, bool exec)
{
int result = dmi_op_timeout(target, data_in, dmi_op, address, data_out,
riscv_command_timeout_sec);
int result = dmi_op_timeout(target, data_in, dmi_busy_encountered, dmi_op,
address, data_out, riscv_command_timeout_sec, exec);
if (result == ERROR_TIMEOUT_REACHED) {
LOG_ERROR("DMI operation didn't complete in %d seconds. The target is "
"either really slow or broken. You could increase the "
@ -600,19 +609,29 @@ static int dmi_op(struct target *target, uint32_t *data_in, int dmi_op,
static int dmi_read(struct target *target, uint32_t *value, uint32_t address)
{
return dmi_op(target, value, DMI_OP_READ, address, 0);
return dmi_op(target, value, NULL, DMI_OP_READ, address, 0, false);
}
static int dmi_read_exec(struct target *target, uint32_t *value, uint32_t address)
{
return dmi_op(target, value, NULL, DMI_OP_READ, address, 0, true);
}
static int dmi_write(struct target *target, uint32_t address, uint32_t value)
{
return dmi_op(target, NULL, DMI_OP_WRITE, address, value);
return dmi_op(target, NULL, NULL, DMI_OP_WRITE, address, value, false);
}
static int dmi_write_exec(struct target *target, uint32_t address, uint32_t value)
{
return dmi_op(target, NULL, NULL, DMI_OP_WRITE, address, value, true);
}
int dmstatus_read_timeout(struct target *target, uint32_t *dmstatus,
bool authenticated, unsigned timeout_sec)
{
int result = dmi_op_timeout(target, dmstatus, DMI_OP_READ, DMI_DMSTATUS, 0,
timeout_sec);
int result = dmi_op_timeout(target, dmstatus, NULL, DMI_OP_READ,
DMI_DMSTATUS, 0, timeout_sec, false);
if (result != ERROR_OK)
return result;
if (authenticated && !get_field(*dmstatus, DMI_DMSTATUS_AUTHENTICATED)) {
@ -635,8 +654,8 @@ static void increase_ac_busy_delay(struct target *target)
{
riscv013_info_t *info = get_info(target);
info->ac_busy_delay += info->ac_busy_delay / 10 + 1;
LOG_DEBUG("dtmcontrol_idle=%d, dmi_busy_delay=%d, ac_busy_delay=%d",
info->dtmcontrol_idle, info->dmi_busy_delay,
LOG_DEBUG("dtmcs_idle=%d, dmi_busy_delay=%d, ac_busy_delay=%d",
info->dtmcs_idle, info->dmi_busy_delay,
info->ac_busy_delay);
}
@ -715,7 +734,7 @@ static int execute_abstract_command(struct target *target, uint32_t command)
}
}
dmi_write(target, DMI_COMMAND, command);
dmi_write_exec(target, DMI_COMMAND, command);
uint32_t abstractcs = 0;
wait_for_idle(target, &abstractcs);
@ -1366,17 +1385,7 @@ static int examine(struct target *target)
riscv013_info_t *info = get_info(target);
info->abits = get_field(dtmcontrol, DTM_DTMCS_ABITS);
info->dtmcontrol_idle = get_field(dtmcontrol, DTM_DTMCS_IDLE);
uint32_t dmstatus;
if (dmstatus_read(target, &dmstatus, false) != ERROR_OK)
return ERROR_FAIL;
LOG_DEBUG("dmstatus: 0x%08x", dmstatus);
if (get_field(dmstatus, DMI_DMSTATUS_VERSION) != 2) {
LOG_ERROR("OpenOCD only supports Debug Module version 2, not %d "
"(dmstatus=0x%x)", get_field(dmstatus, DMI_DMSTATUS_VERSION), dmstatus);
return ERROR_FAIL;
}
info->dtmcs_idle = get_field(dtmcontrol, DTM_DTMCS_IDLE);
/* Reset the Debug Module. */
dm013_info_t *dm = get_dm(target);
@ -1398,6 +1407,16 @@ static int examine(struct target *target)
return ERROR_FAIL;
}
uint32_t dmstatus;
if (dmstatus_read(target, &dmstatus, false) != ERROR_OK)
return ERROR_FAIL;
LOG_DEBUG("dmstatus: 0x%08x", dmstatus);
if (get_field(dmstatus, DMI_DMSTATUS_VERSION) != 2) {
LOG_ERROR("OpenOCD only supports Debug Module version 2, not %d "
"(dmstatus=0x%x)", get_field(dmstatus, DMI_DMSTATUS_VERSION), dmstatus);
return ERROR_FAIL;
}
uint32_t hartsel =
(get_field(dmcontrol, DMI_DMCONTROL_HARTSELHI) <<
DMI_DMCONTROL_HARTSELLO_LENGTH) |
@ -2063,6 +2082,21 @@ static int read_memory_bus_v1(struct target *target, target_addr_t address,
return ERROR_OK;
}
static int batch_run(const struct target *target, struct riscv_batch *batch)
{
RISCV013_INFO(info);
RISCV_INFO(r);
if (r->reset_delays_wait >= 0) {
r->reset_delays_wait -= batch->used_scans;
if (r->reset_delays_wait <= 0) {
batch->idle_count = 0;
info->dmi_busy_delay = 0;
info->ac_busy_delay = 0;
}
}
return riscv_batch_run(batch);
}
/**
* Read the requested memory, taking care to execute every read exactly once,
* even if cmderr=busy is encountered.
@ -2081,31 +2115,43 @@ static int read_memory_progbuf_inner(struct target *target, target_addr_t addres
uint32_t command = access_register_command(target, GDB_REGNO_S1,
riscv_xlen(target),
AC_ACCESS_REGISTER_TRANSFER | AC_ACCESS_REGISTER_POSTEXEC);
result = execute_abstract_command(target, command);
if (result != ERROR_OK)
goto error;
if (execute_abstract_command(target, command) != ERROR_OK)
return ERROR_FAIL;
/* First read has just triggered. Result is in s1. */
dmi_write(target, DMI_ABSTRACTAUTO,
1 << DMI_ABSTRACTAUTO_AUTOEXECDATA_OFFSET);
if (count == 1) {
uint64_t value;
if (register_read_direct(target, &value, GDB_REGNO_S1) != ERROR_OK)
return ERROR_FAIL;
write_to_buf(buffer, value, size);
log_memory_access(address, value, size, true);
return ERROR_OK;
}
if (dmi_write(target, DMI_ABSTRACTAUTO,
1 << DMI_ABSTRACTAUTO_AUTOEXECDATA_OFFSET) != ERROR_OK)
goto error;
/* Read garbage from dmi_data0, which triggers another execution of the
* program. Now dmi_data0 contains the first good result, and s1 the next
* memory value. */
if (dmi_read_exec(target, NULL, DMI_DATA0) != ERROR_OK)
goto error;
/* read_addr is the next address that the hart will read from, which is the
* value in s0. */
riscv_addr_t read_addr = address + size;
/* The next address that we need to receive data for. */
riscv_addr_t receive_addr = address;
riscv_addr_t read_addr = address + 2 * size;
riscv_addr_t fin_addr = address + (count * size);
unsigned skip = 1;
while (read_addr < fin_addr) {
LOG_DEBUG("read_addr=0x%" PRIx64 ", receive_addr=0x%" PRIx64
", fin_addr=0x%" PRIx64, read_addr, receive_addr, fin_addr);
LOG_DEBUG("read_addr=0x%" PRIx64 ", fin_addr=0x%" PRIx64, read_addr,
fin_addr);
/* The pipeline looks like this:
* memory -> s1 -> dm_data0 -> debugger
* It advances every time the debugger reads dmdata0.
* So at any time the debugger has just read mem[s0 - 3*size],
* dm_data0 contains mem[s0 - 2*size]
* s1 contains mem[s0-size] */
* Right now:
* s0 contains read_addr
* s1 contains mem[read_addr-size]
* dm_data0 contains[read_addr-size*2]
*/
LOG_DEBUG("creating burst to read from 0x%" PRIx64
" up to 0x%" PRIx64, read_addr, fin_addr);
@ -2122,10 +2168,11 @@ static int read_memory_progbuf_inner(struct target *target, target_addr_t addres
break;
}
riscv_batch_run(batch);
batch_run(target, batch);
/* Wait for the target to finish performing the last abstract command,
* and update our copy of cmderr. */
* and update our copy of cmderr. If we see that DMI is busy here,
* dmi_busy_delay will be incremented. */
uint32_t abstractcs;
if (dmi_read(target, &abstractcs, DMI_ABSTRACTCS) != ERROR_OK)
return ERROR_FAIL;
@ -2134,9 +2181,8 @@ static int read_memory_progbuf_inner(struct target *target, target_addr_t addres
return ERROR_FAIL;
info->cmderr = get_field(abstractcs, DMI_ABSTRACTCS_CMDERR);
unsigned cmderr = info->cmderr;
riscv_addr_t next_read_addr;
uint32_t dmi_data0 = -1;
unsigned ignore_last = 0;
switch (info->cmderr) {
case CMDERR_NONE:
LOG_DEBUG("successful (partial?) memory read");
@ -2145,38 +2191,12 @@ static int read_memory_progbuf_inner(struct target *target, target_addr_t addres
case CMDERR_BUSY:
LOG_DEBUG("memory read resulted in busy response");
/*
* If you want to exercise this code path, apply the following patch to spike:
--- a/riscv/debug_module.cc
+++ b/riscv/debug_module.cc
@@ -1,3 +1,5 @@
+#include <unistd.h>
+
#include <cassert>
#include "debug_module.h"
@@ -398,6 +400,15 @@ bool debug_module_t::perform_abstract_command()
// Since the next instruction is what we will use, just use nother NOP
// to get there.
write32(debug_abstract, 1, addi(ZERO, ZERO, 0));
+
+ if (abstractauto.autoexecdata &&
+ program_buffer[0] == 0x83 &&
+ program_buffer[1] == 0x24 &&
+ program_buffer[2] == 0x04 &&
+ program_buffer[3] == 0 &&
+ rand() < RAND_MAX / 10) {
+ usleep(1000000);
+ }
} else {
write32(debug_abstract, 1, ebreak());
}
*/
increase_ac_busy_delay(target);
riscv013_clear_abstract_error(target);
dmi_write(target, DMI_ABSTRACTAUTO, 0);
uint32_t dmi_data0;
/* This is definitely a good version of the value that we
* attempted to read when we discovered that the target was
* busy. */
@ -2185,20 +2205,27 @@ static int read_memory_progbuf_inner(struct target *target, target_addr_t addres
goto error;
}
/* Clobbers DMI_DATA0. */
/* See how far we got, clobbering dmi_data0. */
result = register_read_direct(target, &next_read_addr,
GDB_REGNO_S0);
if (result != ERROR_OK) {
riscv_batch_free(batch);
goto error;
}
write_to_buf(buffer + next_read_addr - 2 * size - address, dmi_data0, size);
log_memory_access(next_read_addr - 2 * size, dmi_data0, size, true);
/* Restore the command, and execute it.
* Now DMI_DATA0 contains the next value just as it would if no
* error had occurred. */
dmi_write(target, DMI_COMMAND, command);
dmi_write_exec(target, DMI_COMMAND, command);
next_read_addr += size;
dmi_write(target, DMI_ABSTRACTAUTO,
1 << DMI_ABSTRACTAUTO_AUTOEXECDATA_OFFSET);
ignore_last = 1;
break;
default:
LOG_DEBUG("error when reading memory, abstractcs=0x%08lx", (long)abstractcs);
@ -2209,34 +2236,43 @@ static int read_memory_progbuf_inner(struct target *target, target_addr_t addres
}
/* Now read whatever we got out of the batch. */
dmi_status_t status = DMI_STATUS_SUCCESS;
for (size_t i = 0; i < reads; i++) {
if (read_addr >= next_read_addr)
riscv_addr_t receive_addr = read_addr + (i-2) * size;
assert(receive_addr < address + size * count);
if (receive_addr < address)
continue;
if (receive_addr > next_read_addr - (3 + ignore_last) * size)
break;
read_addr += size;
if (skip > 0) {
skip--;
continue;
}
riscv_addr_t offset = receive_addr - address;
uint64_t dmi_out = riscv_batch_get_dmi_read(batch, i);
status = get_field(dmi_out, DTM_DMI_OP);
if (status != DMI_STATUS_SUCCESS) {
/* If we're here because of busy count, dmi_busy_delay will
* already have been increased and busy state will have been
* cleared in dmi_read(). */
/* In at least some implementations, we issue a read, and then
* can get busy back when we try to scan out the read result,
* and the actual read value is lost forever. Since this is
* rare in any case, we return error here and rely on our
* caller to reread the entire block. */
LOG_WARNING("Batch memory read encountered DMI error %d. "
"Falling back on slower reads.", status);
riscv_batch_free(batch);
result = ERROR_FAIL;
goto error;
}
uint32_t value = get_field(dmi_out, DTM_DMI_DATA);
riscv_addr_t offset = receive_addr - address;
write_to_buf(buffer + offset, value, size);
log_memory_access(receive_addr, value, size, true);
receive_addr += size;
}
riscv_batch_free(batch);
if (cmderr == CMDERR_BUSY) {
riscv_addr_t offset = receive_addr - address;
write_to_buf(buffer + offset, dmi_data0, size);
log_memory_access(receive_addr, dmi_data0, size, true);
read_addr += size;
receive_addr += size;
}
read_addr = next_read_addr;
riscv_batch_free(batch);
}
dmi_write(target, DMI_ABSTRACTAUTO, 0);
@ -2245,10 +2281,9 @@ static int read_memory_progbuf_inner(struct target *target, target_addr_t addres
/* Read the penultimate word. */
uint32_t value;
if (dmi_read(target, &value, DMI_DATA0) != ERROR_OK)
goto error;
write_to_buf(buffer + receive_addr - address, value, size);
log_memory_access(receive_addr, value, size, true);
receive_addr += size;
return ERROR_FAIL;
write_to_buf(buffer + size * (count-2), value, size);
log_memory_access(address + size * (count-2), value, size, true);
}
/* Read the last word. */
@ -2256,8 +2291,8 @@ static int read_memory_progbuf_inner(struct target *target, target_addr_t addres
result = register_read_direct(target, &value, GDB_REGNO_S1);
if (result != ERROR_OK)
goto error;
write_to_buf(buffer + receive_addr - address, value, size);
log_memory_access(receive_addr, value, size, true);
write_to_buf(buffer + size * (count-1), value, size);
log_memory_access(address + size * (count-1), value, size, true);
return ERROR_OK;
@ -2668,7 +2703,7 @@ static int write_memory_progbuf(struct target *target, target_addr_t address,
}
}
result = riscv_batch_run(batch);
result = batch_run(target, batch);
riscv_batch_free(batch);
if (result != ERROR_OK)
goto error;
@ -2678,33 +2713,34 @@ static int write_memory_progbuf(struct target *target, target_addr_t address,
* to be incremented if necessary. */
uint32_t abstractcs;
if (dmi_read(target, &abstractcs, DMI_ABSTRACTCS) != ERROR_OK)
bool dmi_busy_encountered;
if (dmi_op(target, &abstractcs, &dmi_busy_encountered, DMI_OP_READ,
DMI_ABSTRACTCS, 0, false) != ERROR_OK)
goto error;
while (get_field(abstractcs, DMI_ABSTRACTCS_BUSY))
if (dmi_read(target, &abstractcs, DMI_ABSTRACTCS) != ERROR_OK)
return ERROR_FAIL;
info->cmderr = get_field(abstractcs, DMI_ABSTRACTCS_CMDERR);
switch (info->cmderr) {
case CMDERR_NONE:
LOG_DEBUG("successful (partial?) memory write");
break;
case CMDERR_BUSY:
LOG_DEBUG("memory write resulted in busy response");
riscv013_clear_abstract_error(target);
increase_ac_busy_delay(target);
if (info->cmderr == CMDERR_NONE && !dmi_busy_encountered) {
LOG_DEBUG("successful (partial?) memory write");
} else if (info->cmderr == CMDERR_BUSY || dmi_busy_encountered) {
if (info->cmderr == CMDERR_BUSY)
LOG_DEBUG("Memory write resulted in abstract command busy response.");
else if (dmi_busy_encountered)
LOG_DEBUG("Memory write resulted in DMI busy response.");
riscv013_clear_abstract_error(target);
increase_ac_busy_delay(target);
dmi_write(target, DMI_ABSTRACTAUTO, 0);
result = register_read_direct(target, &cur_addr, GDB_REGNO_S0);
if (result != ERROR_OK)
goto error;
setup_needed = true;
break;
default:
LOG_ERROR("error when writing memory, abstractcs=0x%08lx", (long)abstractcs);
riscv013_clear_abstract_error(target);
result = ERROR_FAIL;
dmi_write(target, DMI_ABSTRACTAUTO, 0);
result = register_read_direct(target, &cur_addr, GDB_REGNO_S0);
if (result != ERROR_OK)
goto error;
setup_needed = true;
} else {
LOG_ERROR("error when writing memory, abstractcs=0x%08lx", (long)abstractcs);
riscv013_clear_abstract_error(target);
result = ERROR_FAIL;
goto error;
}
}

65
src/target/riscv/riscv.c
View File

@ -154,17 +154,17 @@ typedef enum slot {
#define MAX_HWBPS 16
#define DRAM_CACHE_SIZE 16
uint8_t ir_dtmcontrol[1] = {DTMCONTROL};
uint8_t ir_dtmcontrol[4] = {DTMCONTROL};
struct scan_field select_dtmcontrol = {
.in_value = NULL,
.out_value = ir_dtmcontrol
};
uint8_t ir_dbus[1] = {DBUS};
uint8_t ir_dbus[4] = {DBUS};
struct scan_field select_dbus = {
.in_value = NULL,
.out_value = ir_dbus
};
uint8_t ir_idcode[1] = {0x1};
uint8_t ir_idcode[4] = {0x1};
struct scan_field select_idcode = {
.in_value = NULL,
.out_value = ir_idcode
@ -1759,6 +1759,48 @@ COMMAND_HANDLER(riscv_test_sba_config_reg)
}
}
COMMAND_HANDLER(riscv_reset_delays)
{
int wait = 0;
if (CMD_ARGC > 1) {
LOG_ERROR("Command takes at most one argument");
return ERROR_COMMAND_SYNTAX_ERROR;
}
if (CMD_ARGC == 1)
COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], wait);
struct target *target = get_current_target(CMD_CTX);
RISCV_INFO(r);
r->reset_delays_wait = wait;
return ERROR_OK;
}
COMMAND_HANDLER(riscv_set_ir)
{
if (CMD_ARGC != 2) {
LOG_ERROR("Command takes exactly 2 arguments");
return ERROR_COMMAND_SYNTAX_ERROR;
}
uint32_t value;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
if (!strcmp(CMD_ARGV[0], "idcode")) {
buf_set_u32(ir_idcode, 0, 32, value);
return ERROR_OK;
} else if (!strcmp(CMD_ARGV[0], "dtmcs")) {
buf_set_u32(ir_dtmcontrol, 0, 32, value);
return ERROR_OK;
} else if (!strcmp(CMD_ARGV[0], "dmi")) {
buf_set_u32(ir_dbus, 0, 32, value);
return ERROR_OK;
} else {
return ERROR_FAIL;
}
}
static const struct command_registration riscv_exec_command_handlers[] = {
{
.name = "test_compliance",
@ -1848,6 +1890,23 @@ static const struct command_registration riscv_exec_command_handlers[] = {
", an illegal, 128-byte aligned address for error flag/handling cases,"
"and whether sbbusyerror test should be run."
},
{
.name = "reset_delays",
.handler = riscv_reset_delays,
.mode = COMMAND_ANY,
.usage = "reset_delays [wait]",
.help = "OpenOCD learns how many Run-Test/Idle cycles are required "
"between scans to avoid encountering the target being busy. This "
"command resets those learned values after `wait` scans. It's only "
"useful for testing OpenOCD itself."
},
{
.name = "set_ir",
.handler = riscv_set_ir,
.mode = COMMAND_ANY,
.usage = "riscv set_ir_idcode [idcode|dtmcs|dmi] value",
.help = "Set IR value for specified JTAG register."
},
COMMAND_REGISTRATION_DONE
};

10
src/target/riscv/riscv.h
View File

@ -96,6 +96,10 @@ typedef struct {
bool triggers_enumerated;
/* Decremented every scan, and when it reaches 0 we clear the learned
* delays, causing them to be relearned. Used for testing. */
int reset_delays_wait;
/* Helper functions that target the various RISC-V debug spec
* implementations. */
int (*get_register)(struct target *target,
@ -147,11 +151,11 @@ static inline riscv_info_t *riscv_info(const struct target *target)
{ return target->arch_info; }
#define RISCV_INFO(R) riscv_info_t *R = riscv_info(target);
extern uint8_t ir_dtmcontrol[1];
extern uint8_t ir_dtmcontrol[4];
extern struct scan_field select_dtmcontrol;
extern uint8_t ir_dbus[1];
extern uint8_t ir_dbus[4];
extern struct scan_field select_dbus;
extern uint8_t ir_idcode[1];
extern uint8_t ir_idcode[4];
extern struct scan_field select_idcode;
/*** OpenOCD Interface */