interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/fsl_imx6q_sabresd.cfg

150 lines
4.0 KiB
INI
Raw Normal View History

tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2022-06-12 16:48:05 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
board: add configuration for freescale imx6q sabresd board This configuration file contains jtag, reset and init functions for the Freescale SabreSD board variant with iMX6Q SoC. Change-Id: I2366af6da1d82550eb485f36ad61469305c59ffb Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3357 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-02-09 08:05:44 -06:00
#
# Board configuration file for the Freescale IMX6Q Sabre SD EVM
#
# This board does not have an embedded JTAG adapter, you must source
# a suitable adapter configuration before sourcing this file.
# Sabre SD has a standard ARM-20 JTAG connector with
# nTRST and nSRST available.
reset_config trst_and_srst
# the only possible transport is JTAG
transport select jtag
# iMX6Q POR gates JTAG and the chip is completely incommunicado
# over JTAG for at least 10ms after nSRST is deasserted
tcl: replace the deprecated commands with "adapter ..." Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-08-23 08:51:00 -05:00
adapter srst delay 11
board: add configuration for freescale imx6q sabresd board This configuration file contains jtag, reset and init functions for the Freescale SabreSD board variant with iMX6Q SoC. Change-Id: I2366af6da1d82550eb485f36ad61469305c59ffb Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3357 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-02-09 08:05:44 -06:00
# Source generic iMX6Q target configuration
set CHIPNAME imx6q
source [find target/imx6.cfg]
# function to apply initial configuration after a reset. It
# provides a basic pad configuration and also DDR memory and clocks
# sufficient to load and execute a boot loader (e.g. barebox) from
# DDR memory. This list is extracted from the barebox flash image
# header.
proc apply_dcd { } {
mww 0x020e05a8 0x00000030
mww 0x020e05b0 0x00000030
mww 0x020e0524 0x00000030
mww 0x020e051c 0x00000030
mww 0x020e0518 0x00000030
mww 0x020e050c 0x00000030
mww 0x020e05b8 0x00000030
mww 0x020e05c0 0x00000030
mww 0x020e05ac 0x00020030
mww 0x020e05b4 0x00020030
mww 0x020e0528 0x00020030
mww 0x020e0520 0x00020030
mww 0x020e0514 0x00020030
mww 0x020e0510 0x00020030
mww 0x020e05bc 0x00020030
mww 0x020e05c4 0x00020030
mww 0x020e056c 0x00020030
mww 0x020e0578 0x00020030
mww 0x020e0588 0x00020030
mww 0x020e0594 0x00020030
mww 0x020e057c 0x00020030
mww 0x020e0590 0x00003000
mww 0x020e0598 0x00003000
mww 0x020e058c 0x00000000
mww 0x020e059c 0x00003030
mww 0x020e05a0 0x00003030
mww 0x020e0784 0x00000030
mww 0x020e0788 0x00000030
mww 0x020e0794 0x00000030
mww 0x020e079c 0x00000030
mww 0x020e07a0 0x00000030
mww 0x020e07a4 0x00000030
mww 0x020e07a8 0x00000030
mww 0x020e0748 0x00000030
mww 0x020e074c 0x00000030
mww 0x020e0750 0x00020000
mww 0x020e0758 0x00000000
mww 0x020e0774 0x00020000
mww 0x020e078c 0x00000030
mww 0x020e0798 0x000c0000
mww 0x021b081c 0x33333333
mww 0x021b0820 0x33333333
mww 0x021b0824 0x33333333
mww 0x021b0828 0x33333333
mww 0x021b481c 0x33333333
mww 0x021b4820 0x33333333
mww 0x021b4824 0x33333333
mww 0x021b4828 0x33333333
mww 0x021b0018 0x00081740
mww 0x021b001c 0x00008000
mww 0x021b000c 0x555a7975
mww 0x021b0010 0xff538e64
mww 0x021b0014 0x01ff00db
mww 0x021b002c 0x000026d2
mww 0x021b0030 0x005b0e21
mww 0x021b0008 0x09444040
mww 0x021b0004 0x00025576
mww 0x021b0040 0x00000027
mww 0x021b0000 0x831a0000
mww 0x021b001c 0x04088032
mww 0x021b001c 0x0408803a
mww 0x021b001c 0x00008033
mww 0x021b001c 0x0000803b
mww 0x021b001c 0x00428031
mww 0x021b001c 0x00428039
mww 0x021b001c 0x09408030
mww 0x021b001c 0x09408038
mww 0x021b001c 0x04008040
mww 0x021b001c 0x04008048
mww 0x021b0800 0xa1380003
mww 0x021b4800 0xa1380003
mww 0x021b0020 0x00005800
mww 0x021b0818 0x00022227
mww 0x021b4818 0x00022227
mww 0x021b083c 0x434b0350
mww 0x021b0840 0x034c0359
mww 0x021b483c 0x434b0350
mww 0x021b4840 0x03650348
mww 0x021b0848 0x4436383b
mww 0x021b4848 0x39393341
mww 0x021b0850 0x35373933
mww 0x021b4850 0x48254A36
mww 0x021b080c 0x001f001f
mww 0x021b0810 0x001f001f
mww 0x021b480c 0x00440044
mww 0x021b4810 0x00440044
mww 0x021b08b8 0x00000800
mww 0x021b48b8 0x00000800
mww 0x021b001c 0x00000000
mww 0x021b0404 0x00011006
mww 0x020c4068 0x00c03f3f
mww 0x020c406c 0x0030fc03
mww 0x020c4070 0x0fffc000
mww 0x020c4074 0x3ff00000
mww 0x020c4078 0x00fff300
mww 0x020c407c 0x0f0000c3
mww 0x020c4080 0x000003ff
mww 0x020e0010 0xf00000cf
mww 0x020e0018 0x007f007f
mww 0x020e001c 0x007f007f
}
# disable watchdog
proc disable_wdog { } {
mwh 0x020bc000 0x30
}
# This function applies the initial configuration after a "reset init"
# command
proc imx6q_sabresd_init { } {
disable_wdog
apply_dcd
}
# prevent cortex-a code from asserting SRST again
$_TARGETNAME.0 configure -event reset-assert { }
# hook the init function into the reset-init event
$_TARGETNAME.0 configure -event reset-init { imx6q_sabresd_init }
# set a slow default JTAG clock, can be overridden later
tcl: replace the deprecated commands with "adapter ..." Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-08-23 08:51:00 -05:00
adapter speed 1000