interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/cpu/arc/v2.tcl

347 lines
9.7 KiB
Tcl
Raw Normal View History

Introduce ARCv2 tcl config files With this commit we add tcl files which describes ARCv2 architecture features and configure files for ARCv2 EMSK board. Changes since v1: -Moved from http://openocd.zylin.com/#/c/5332/4 into separate commit. Changes: 22.01.2020: -Removed "actionpoints" handling code in tcl/cpu/arc/v2.tcl because this capability is not supported yet. Changes: 17.03.2020: -Update Licence headers -Cleanup indents -Removed "reset halt" in boards .tcl -Updated adapter frequency commands Changes: 15.03.2020: -Removed "init" in the of boards .tcl Change-Id: I51bf620abe7b8e046e1dccc861a7d963965d3a42 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5350 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-11-27 23:34:01 -06:00
# Copyright (C) 2015, 2020 Synopsys, Inc.
# Anton Kolesov <anton.kolesov@synopsys.com>
# Didin Evgeniy <didin@synopsys.com>
#
# SPDX-License-Identifier: GPL-2.0-or-later
source [find cpu/arc/common.tcl]
# Currently 'examine_target' can only read JTAG registers and set properties -
# but it shouldn't write any of registers - writes will be cached, but cache
# will be invalidated before flushing after examine_target, and changes will be
# lost. Perhaps that would be fixed later - perhaps writes shouldn't be cached
# after all. But if write to register is really needed from TCL - then it
# should be done via "arc jtag" for now.
proc arc_v2_examine_target { {target ""} } {
# Set current target, because OpenOCD event handlers don't do this for us.
if { $target != "" } {
targets $target
}
# Those registers always exist. DEBUG and DEBUGI are formally optional,
# however they come with JTAG interface, and so far there is no way
# OpenOCD can communicate with target without JTAG interface.
arc set-reg-exists identity pc status32 bta debug lp_start lp_end \
eret erbta erstatus ecr efa
# 32 core registers
arc set-reg-exists \
r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 \
r13 r14 r15 r16 r17 r18 r19 r20 r21 r22 r23 r24 r25 \
gp fp sp ilink r30 blink lp_count pcl
target/arc: Introduce Actionpoints support Actionpoint mechanism allows to setup HW breakpoints and watchpoints on Synopsys ARC CPUs. This mechanism is controlled by DEBUG register and by a set of auxilary registers. Each actionpoint is controlled by 3 aux registers: Actionpoint(AP) match mask(AP_AMM), AP match value(AP_AMV) and AP control(AC). Note: some fields of actionpoint_t structure will be used in further support of watchpoints. Change-Id: I4efb24675f247cc19d9122501c9e63c3126fcab4 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5763 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-07-10 06:52:35 -05:00
# Actionpoints
if { [arc get-reg-field ap_build version] == 5 } {
set ap_build_type [arc get-reg-field ap_build type]
# AP_BUILD.TYPE > 0b0110 is reserved in current ISA.
# Current ISA supports up to 8 actionpoints.
if { $ap_build_type < 8 } {
# Two LSB bits of AP_BUILD.TYPE define amount of actionpoints:
# 0b00 - 2 actionpoints
# 0b01 - 4 actionpoints
# 0b10 - 8 actionpoints
# 0b11 - reserved.
From upstream (#620) * cortex_m: use unsigned int for FPB and DWT quantifiers related quantifiers are: - fp_num_lit - fp_num_code - dwt_num_comp - dwt_comp_available Change-Id: I07dec2d4aa21bc0e580be0d9fd0a6809f876c2a8 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6185 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * telnet: allow hiding selected commands during auto-completion We have TCL procedure and commands that we do not want to show in the list of auto-completion. E.g. TCL wrappers for deprecated commands, internal procedures that are not supposed to be exposed to user, or even commands that the user decides to hide. Create a TCL procedure to be called by telnet auto-complete code in place of the hard-coded TCL command. The procedure will run the same command and will filter-out the unwanted command names. Initialize the list of commands to be filtered-out with the name of the TCL procedure above, as it is considered as internal. Change-Id: I2d83bbf8194502368c589c85cccb617e69128c69 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6194 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> * telnet/auto-complete: hide deprecated and internal commands For both: - TCL proc that redirect deprecated commands to the new commands, - TCL proc used internally and not supposed to be exposed to user, add their name to the list of commands that should be hide by the telnet auto-complete. Change-Id: I05237c6a79334b7d2b151dfb129fb57b2f40bba6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6195 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> * startup.tcl: prepare for jimtcl 0.81 'expr' syntax change Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. Modify the script startup.tcl compiled-in OpenOCD binary to comply with the new jimtcl. Change-Id: I520dcafacadaa289a815035f93f250447ca66ea0 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6158 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * tcl: [1/3] prepare for jimtcl 0.81 'expr' syntax change Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. In the TCL scripts distributed with OpenOCD there are 1700+ lines that should be modified before switching to jimtcl 0.81. Apply the script below on every script in tcl folder. It fixes more than 92% of the lines %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- #!/usr/bin/perl -Wpi my $re_sym = qr{[a-z_][a-z0-9_]*}i; my $re_var = qr{(?:\$|\$::)$re_sym}; my $re_const = qr{0x[0-9a-f]+|[0-9]+|[0-9]*\.[0-9]*}i; my $re_item = qr{(?:~\s*)?(?:$re_var|$re_const)}; my $re_op = qr{<<|>>|[+\-*/&|]}; my $re_expr = qr{( (?:\(\s*(?:$re_item|(?-1))\s*\)|$re_item) \s*$re_op\s* (?:$re_item|(?-1)|\(\s*(?:$re_item|(?-1))\s*\)) )}x; # [expr [dict get $regsC100 SYM] + HEXNUM] s/\[expr (\[dict get $re_var $re_sym\s*\] \+ *$re_const)\]/\[expr \{$1\}\]/; # [ expr (EXPR) ] # [ expr EXPR ] # note: $re_expr captures '$3' s/\[(\s*expr\s*)\((\s*$re_expr\s*)\)(\s*)\]/\[$1\{$2\}$4\]/; s/\[(\s*expr\s*)($re_expr)(\s*)\]/\[$1\{$2\}$4\]/; %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: I0d6bddc6abf6dd29062f2b4e72b5a2b5080293b9 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6159 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * tcl: [2/3] prepare for jimtcl 0.81 'expr' syntax change Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. Enclose within double quote the argument of 'expr' when there is the need to concatenate strings. Change-Id: Ic0ea990ed37337a7e6c3a99670583685b570b8b1 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6160 Tested-by: jenkins * tcl: [3/3] prepare for jimtcl 0.81 'expr' syntax change Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. Fix manually the remaining lines that don't match simple patterns and would require dedicated boring scripting. Remove the 'expr' command where appropriate. Change-Id: Ia75210c8447f88d38515addab4a836af9103096d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6161 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/stm8: Make 'stm8_command_handlers' static Change-Id: I5237a8f2a1ecba9383672e37bd56f8ccd17598b6 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6200 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/riscv: Change 'authdata_read' output Use a constant output length and remove the line break to make the authentication data easier to parse. Change-Id: Iebbf1f171947ef89b0f360a2cb286a4ea15c6ba5 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6199 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tim Newsome <tim@sifive.com> * Enable adapter "Bus Pirate" by default. The Bus Pirate is now listed in the "OpenOCD configuration summary" too. Change-Id: Ieb7bf9134af456ebe9803f3108a243204fb2a62d Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/5637 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * coding-style: additional style for C code To improve readability and to push more uniform code style. Prefer 'if (false) {...}' for unused code so it get checked by the compiler. Define preferred indentation for 'switch' statement. Require balanced brackets in 'if/else'. Report the max line length. Report the formatting strings for stdint/inttypes types. Report the type 'target_addr_t'. Prefer 'unsigned int' to 'unsigned'. Change-Id: I0192a4ed298f6c6c432764fdd156cffd4b13fc89 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6203 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Marc Schink <dev@zapb.de> * Add IPDBG JtagHost functionality to OpenOCD IPDBG are utilities to debug IP-cores. It uses JTAG for transport to/from the FPGA. The different UIs use TCP/IP as transport. The JtagHost makes the bridge between these two. Comparable to the bridge between GDB and the in-circuit- debugging-unit of a micro controller. Change-Id: Ib1bc10dcbd4ea426e492bb7b2d85c1ed1b7a8d5a Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: http://openocd.zylin.com/5938 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * flash/nor/xcf: Do not use 'Yoda conditions' Change-Id: I17308f5237338ce468e5b86289a0634429deaaa9 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6201 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * cortex_m: add armv8m special registers Change-Id: I1942f375a5f4282ad1fe4a2ff3b8f3cbc64d8f7f Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6016 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * rtos: Add support for Zephyr RTOS With this patch, the Zephyr[1] RTOS is supported by OpenOCD. As usual with support for other RTOSes, Zephyr must be compiled with the DEBUG_THREAD_INFO option. This will generate some symbols with information needed in order to build the list of threads. The current implementation is limited to Zephyr running on ARM Cortex-M processors. This is the only ARM variant supported by Zephyr at the moment and is used on most of the officially supported boards. [1] https://www.zephyrproject.org/ Change-Id: I22afdbec91562f3a22cf5b88cd4ea3a7a59ba0b4 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Signed-off-by: Leandro Pereira <leandro.pereira@intel.com> Signed-off-by: Daniel Glöckner <dg@emlix.com> Reviewed-on: http://openocd.zylin.com/4988 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/armv7m.h: [style] replace tab with space between variable type and name Change-Id: I9740c25857295a2a655d3046322a3f23f0ee7f78 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6230 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * server: gdb_server: Add colon for target extended-remote Both GDB commands "target remote" and "target extended-remote" require to have ":" right before port number. e.g. (gdb) target extended-remote :3333 Add ":" to the warning message so that users can copy & past it. Change-Id: Id6d8ec1e4dfd3c12cb7f3b314064f2c35fa7ab55 Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Reviewed-on: http://openocd.zylin.com/6237 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * jimtcl: restrict memory leak workaround on Linux only The workaround for jimtcl 0.80 in commit 36ae487ed04b ("jimtcl: add temporary workaround for memory leak in jimtcl 0.80") issues a compile time error on macOS: ../src/helper/command.c:157:22: error: aliases are not supported on darwin __attribute__((weak, alias("workaround_createcommand"))); The OS is x86_64-apple-darwin19.6.0 and the compiler used is x86_64-apple-darwin13.4.0-clang. Restrict the workaround on Linux host only. The fix for 'expr' syntax change is already merged and the workaround will be dropped soon. Change-Id: I925109a9c57c05f8c95b70bc7d6604eb1172cd79 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reported-by: Adam Jeliński <ajelinski@users.sourceforge.net> Fixes: 36ae487ed04b ("jimtcl: add temporary workaround for memory leak in jimtcl 0.80") Fixes: https://sourceforge.net/p/openocd/tickets/304/ Reviewed-on: http://openocd.zylin.com/6241 Tested-by: jenkins * target/armv7m: fix static analyzer warning Despite of assert(is_packed) clang static analyser complains on use of the uninitialized offset variable. Cross compiling with latest x86_64-w64-mingw32-gcc hits warnings src/target/armv7m.c: In function ‘armv7m_read_core_reg’: src/target/armv7m.c:337:54: error: ‘reg32_id’ may be used uninitialized in this function [-Werror=maybe-uninitialized] It happens because mingw32 defines assert() without the attribute "noreturn", whatever NDEBUG is defined or not. Replace assert(is_packed) by if (is_packed) conditional and call assert(false) in the else branch. Change-Id: Id3c7dcccb65106e28be200b9a4d2b642f4d31019 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/6256 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Andrzej Sierżęga <asier70@gmail.com> * cmsis_dap: fix build on macOS Compile fails with error: src/jtag/drivers/cmsis_dap.c:683:28: error: format specifies type 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] " received 0x%" PRIx8, CMD_DAP_TFER, resp[0]); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ Fix the format specifier. Change-Id: I0a5a1a35452d634019989d14d849501fb8a7e93a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6255 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * cortex_m: do not perform soft_reset_halt on targets without VECTRESET Change-Id: Ib3df457e0afe4e342c82ad1af25e03aad6979d87 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6209 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * cortex_m: fix VECTRESET detection for ARMv6-M cores VECTRESET check should be done after verifying if the core is an ARMv6-M core, and not before that. Fixes: 2dc9c1df81b6 ("cortex_m: [FIX] ARMv8-M does not support VECTRESET") Change-Id: I8306affd332b3a35cea69bba39ef24ca71244273 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6232 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/arm_dpm: rename 'wp_pc' as 'wp_addr' The field 'wp_pc' was originally introduced in commit 55eeea7fceb6 ("ARMv7a/Cortex-A8: report watchpoint trigger insn") in end 2009 to contain the address of the instruction which triggered a watchpoint. Later on with commit 651b861d5d5f ("target/aarch64: Add watchpoint support") it has been reused in to hold directly the memory address that triggered a watchpoint. Rename 'wp_pc' as 'wp_addr' and change its doxygen description. While there, fix the format string to print the field. Change-Id: I2e5ced1497e4a6fb6b38f91e881807512e8d8c47 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6204 Tested-by: jenkins Reviewed-by: Liming Sun <limings@nvidia.com> * target/aarch64: fix watchpoint management The early documentation for armv8a report the debug register WFAR as containing the address of the instruction that triggered the watchpoint. More recent documentation report the register EDWAR as containing the data memory address that triggered the watchpoint. The name of macros CPUV8_DBG_WFAR0 and CPUV8_DBG_WFAR1 is not correct as they point to the debug register EDWAR, so reading such register returns directly the data memory address that triggered the watchpoint. The code incorrectly passes this address value to the function armv8_dpm_report_wfar(); this function is supposed to adjust the PC value, decrementing it to remove the effects of the CPU pipeline. This pipeline offset, that has no meaning on the value in EDWAR, caused commit 651b861d5d5f ("target/aarch64: Add watchpoint support") to add back the offset while comparing the address with the watchpoint enabled. The upper 32 bits of EDWAR are not valid in aarch32 mode and have to be ignored. Rename CPUV8_DBG_WFAR0/1 as CPUV8_DBG_EDWAR0/1. Remove the function armv8_dpm_report_wfar(). Remove the offset while searching the matching watchpoint. Ignore the upper 32 bits of EDWAR in aarch32 mode. Fix a comment and the LOG text. Change-Id: I7cbdbeb766fa18e31cc72be098ca2bc501877ed1 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6205 Tested-by: jenkins Reviewed-by: Liming Sun <limings@nvidia.com> * flash/stm32l4x: add missing break statement this is not a bug fix, this for loop will issue only one match adding the break will save unnecessary more loops. Change-Id: Ic1484ea8cdea1b284eb570f9e3e7818e07daf5cd Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6248 Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: jenkins * github/action: create a permanent 'latest' release this commit extends the existing snapshot action to create a release named 'latest' with the built binaries for windows. this 'latest' release will be updated after every push to github. Change-Id: I75a64c598169241743add3ac9aa7a0337fbab7f2 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6127 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * tcl/rp2040: remove empty line at end of file Change-Id: I212a96b77282b151a8ecbd46a6436e2bbbda4161 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6221 Tested-by: jenkins * tcl: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. While there, fix one indentation. Change-Id: I72369ed26f363bacd760b40b8c83dd95e89d28a4 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6214 Tested-by: jenkins * flash: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. Change-Id: Ia5f134c91beb483fd865df9e4877e0ec3e789478 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6215 Tested-by: jenkins * jtag: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. Change-Id: I101c76a638805d77c1ff356cf0f027552389e5d3 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6216 Tested-by: jenkins * target: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. Change-Id: I548581247db72e683249749d1b8725035530b06e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6217 Tested-by: jenkins * openocd: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. Change-Id: I7b4cae1798ff5ea048fcbc671a397af763fdc605 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6218 Tested-by: jenkins * Document the buspirate interface driver. Change-Id: Iaff13fc5187041a840f4f00eb6b4ee52880cf47e Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/6231 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Warn on undefined preprocessor symbols Preprocessor directives like "#if SYMBOL" silently replace undefined or misspelt symbols with 0, which makes configuration bugs hard to spot. Compiler flag "-Wundef" prevents such errors. Change-Id: I91b7ba2db02ef0c3c452d334601c53aebda4660e Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/6238 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Remove compatibility macros m4_ifblank and m4_ifnblank They are at least since Autoconf 2.67 present, and we are requiring version 2.69. Change-Id: I41b33d4ebe02198f03cdddcc4a3c1beedd993d78 Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/6239 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * configure.ac: use a separate folder for Autoconf-generated files Autoconf generates several files in root folder of the project. Keep the root folder cleaner by specifying subfolder 'build-aux'. Align .gitignore accordingly. Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Change-Id: Ied87faba495d9eeb8f98e78c2e2b7e7e596febfb Reviewed-on: http://openocd.zylin.com/6236 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * helper/command: silent debug msg on command register/unregister Commit e216186fab59 ("helper/command: register full-name commands in jim") and commit a7d68878e4ba ("helper/command: unregister commands through their full-name") introduce a LOG_DEBUG() message each for command registration and unregistration. The messages above are quite noisy and pollute the log when debug_level is 3 or higher. They can be useful to debug the command registration logic, but for the other debug activities on OpenOCD are just noisy. Already commit a03ac1ba3087 ("helper/command: disable logging of registered commands [RFC]") was merged to silent the first case that is now back with additional logs. Silent both log messages. Use 'if (false)' to silent them, making easy to re-enable it when or if someone needs it. Change-Id: Id8a067e60e822d4ecbddcb036d081298f7e6181f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6220 Tested-by: jenkins * mem_ap: fix target arch_info type The target mem_ap appears as an ARM target, thus it allows the execution of ARM specific commands causing the crash of OpenOCD. E.g. 'arm mrc ...' can be executed and segfaults. Replace the incorrect ARM magic number with a dedicated one. While there, remove the 'struct arm', that is now holding only the mem_ap's dap, and replace it with a pointer to the dap. Change-Id: I881332d3fdf8d8f8271b8711607737b052a5699b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6213 Tested-by: jenkins * riscv: drop unused variable The array newly_halted[] is assigned but its value is never used. Drop it! Change-Id: I678812a31c45a3ec03716e3eee6a30b8e8947926 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6257 Tested-by: jenkins Reviewed-by: Xiang W <wxjstz@126.com> Reviewed-by: Tim Newsome <tim@sifive.com> * riscv: replace macro DIM() with ARRAY_SIZE() OpenOCD already defines the macro ARRAY_SIZE, while riscv code uses a local macro DIM. Prefer using the macro ARRAY_SIZE() instead of DIM(). Not all the riscv code has been upstreamed, yes; this patch only covers the code already upstreamed. Change-Id: I89a58a6d91916d85c53ba5e4091b558271f8d618 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6258 Reviewed-by: Xiang W <wxjstz@126.com> Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com> * target/zynqmp : Add AXI AP access port The Xilinx Zynq UltraScale+ SoC have an "AXI-AP" access port for direct memory accesses without halting CPUs. Change-Id: I6303331c217795657575de4759444938e775dee1 Signed-off-by: Olivier DANET <odanet@caramail.com> Reviewed-on: http://openocd.zylin.com/6263 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * drivers/versaloon: use ARRAY_SIZE() Replace the custom macro dimof() with the OpenOCD macro ARRAY_SIZE(). Change-Id: I2fe638444f6c16f2a78c1fd558b21550f76282d6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6259 Tested-by: jenkins Reviewed-by: Xiang W <wxjstz@126.com> * openocd: use macro ARRAY_SIZE() There are still few cases where the macro ARRAY_SIZE() should be used in place of custom code. Use ARRAY_SIZE() whenever possible. Change-Id: Iba0127a02357bc704fe639e08562a4f9aa7011df Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6260 Reviewed-by: Xiang W <wxjstz@126.com> Tested-by: jenkins * rtos: use ARRAY_SIZE() and simplify rtos_type.create() Use the existing macro ARRAY_SIZE(). Rewrite the functions rtos_type.create() to simplify the logic. Change-Id: I8833354767045d1642801d26944c9087a77add00 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6261 Tested-by: jenkins * tcl: remove remaining deprecated commands There are still few adapter_khz, ftdi_location, jtag_nsrst_delay and xds110_serial strolling around ... Change-Id: I3e8503dcc3875e3c92e6536f3d455a5e448d51ff Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6270 Tested-by: jenkins * help text: remove trailing space Some help text end with a useless space character. Remove it. Change-Id: I397e1194fac8042f0fab694222f925f906716de3 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6222 Tested-by: jenkins * help: fix line size in 'usage' output The implementation of command 'usage' is broken while checking the line limit of 76 chars per line (e.g. 'usage load_image') and the line wrapping is not correct. The same broken code is used for the first output line of command 'help' too. When call command_help_show_wrap(), include the command's name in the string so the whole text would be wrapped. Change-Id: Idece01ce54994db7e851d8522435ff764b11f3ac Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6223 Tested-by: jenkins * LICENSES: Add the MIT license Add the full text of the MIT license to the kernel tree. It was copied directly from: https://spdx.org/licenses/MIT.html#licenseText Add the required tags for reference and tooling. Change-Id: I94a5dea5ced6421809ea2a3448f8dda19a93f5c9 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6219 Tested-by: jenkins * stlink: add comment of firmware version for each flag bit Change-Id: I7f7c7b9c9cfd88125f82662ed864a2c0715140b1 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6211 Tested-by: jenkins * stlink: reorder the flag macro by firmware release The corresponding bit for each macro is changed, but this is not relevant in the code. Change-Id: I7039464f5a3d55d008208f44952aadeb815bd5a3 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6212 Tested-by: jenkins * tcl/board: Add ST NUCLEO-8S208RB Change-Id: I384c6ad9b4cbabbc004160677f600d8c4bd3eb71 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6268 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/arm_adi_v5: Fix clear sticky overrun flag during replay of commands When a WAIT occurs the commands after the WAIT are replayed and the STICKYORUN is cleared. However if another WAIT occurs during the command replay, the command itself is resent but the STICKYORUN bit shall also be cleared. If this is not done, the MEM-AP hangs. Change-Id: I14e8340cd5d8f58f4de31509da96cfa2ecb630d1 Signed-off-by: micbis <michele.bisogno.ct@renesas.com> Reviewed-on: http://openocd.zylin.com/6278 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * target/cortex_a: add support for watchpoints The current implementation of OpenOCD does not support watchpoints for cortex_a architecture. So, I replaced the add_watchpoint and remove_watchpoint with the specific implementation for the cortex a and using the breakpoint implementation and the arm documentation [1] as reference. In particular, I have made the following changes: * added the following functions - cortex_a_add_watchpoint This wrapper function check whether there are any watchpoint available on the target device by calling cortex_a_set_watchpoint. - cortex_a_set_watchpoint This function is responsible for settings the watchpoint register pair. In particular, it sets the WVR and the WCR registers with the cortex_a_dap command. - cortex_a_remove_watchpoint This wrapper function the selected watchpoint on the target device by calling cortex_a_unset_watchpoint. - cortex_a_unset_watchpoint This function sets both the WVR and the WCR registers to zero, thus unsetting the watchpoint. [1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0464f/BCGDHIEJ.html Change-Id: I86611dab474cb84836662af572b17636dc68e282 Signed-off-by: Chengyu Zheng <chengyu.zheng@polimi.it> Reviewed-on: http://openocd.zylin.com/3913 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins * target/cortex_a: fix number of watchpoints Decrement the available watchpoints only when succeed setting it. Initialize the available watchpoint with the correct value. Change-Id: I0f93b347300b8ebedbcd9e718d4ba32b26cf6846 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6196 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * target/cortex_a: add support for watchpoint length of 1, 2 and 4 bytes Use byte address select for 1 and 2 bytes length. Use normal mode for 4 bytes length. Change-Id: I28d182f25145d0635de64d0361d456f1ad96640e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6197 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * target/cortex_a: fix memory leak on watchpoints The memory allocated to hold the watchpoints is not freed at OpenOCD exit. Free the watchpoint memory at OpenOCD exit. Change-Id: I518c9ce0dc901cde2913d752e3154734f878b854 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6210 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * helper/jim-nvp: comply with coding style [1/2] The helper jim-nvp does not comply with OpenOCD coding style due to typedef of struct and CamelCase symbol names. While it's trivial fixing the helper and all its current use in the code, changing these APIs will potentially break a number of patches pending in gerrit. Gerrit will not trigger any alert, but the code will generate compile error after the merge. Add the compile flag "-Wno-error=deprecated-declarations" to keep as warning (not as error) the use of "deprecated" functions and types. Rename all the CamelCase symbols is lowercase and provide struct prototypes in place of the typedef. Add a DEPRECATED section to 'jim-nvp.h' where the old CamelCase symbols and the old typedef are re-declared with compile attribute 'deprecated'. With this change OpenOCD compiles, but generates warnings. The remaining changes allover OpenOCD code will be fixed in a separate patch for easier review. The patches merged later that still use the old deprecated API will compile with warnings. This will permit to identify and fix these cases. Change-Id: I786385d0f662dbb1be5be313ae42623156d68ce5 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6183 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de> * helper/jim-nvp: comply with coding style [2/2] With the API fixed to comply with OpenOCD coding style, fix all the references in the code. Patch generated automatically with the script below. The list is in reverse order to replace a common prefix after the replacement of the symbols with the same prefix. %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF Jim_SetResult_NvpUnknown jim_set_result_nvp_unknown Jim_Nvp_value2name_simple jim_nvp_value2name_simple Jim_Nvp_value2name_obj jim_nvp_value2name_obj Jim_Nvp_value2name jim_nvp_value2name Jim_Nvp_name2value_simple jim_nvp_name2value_simple Jim_Nvp_name2value_obj_nocase jim_nvp_name2value_obj_nocase Jim_Nvp_name2value_obj jim_nvp_name2value_obj Jim_Nvp_name2value_nocase_simple jim_nvp_name2value_nocase_simple Jim_Nvp_name2value_nocase jim_nvp_name2value_nocase Jim_Nvp_name2value jim_nvp_name2value Jim_Nvp struct jim_nvp Jim_GetOpt_Wide jim_getopt_wide Jim_GetOpt_String jim_getopt_string Jim_GetOpt_Setup jim_getopt_setup Jim_GetOpt_Obj jim_getopt_obj Jim_GetOpt_NvpUnknown jim_getopt_nvp_unknown Jim_GetOpt_Nvp jim_getopt_nvp Jim_GetOpt_Enum jim_getopt_enum Jim_GetOpt_Double jim_getopt_double Jim_GetOpt_Debug jim_getopt_debug Jim_GetOptInfo struct jim_getopt_info Jim_GetNvp jim_get_nvp Jim_Debug_ArgvString jim_debug_argv_string EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find src -type f ! -name jim-nvp.\? ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: I10a12bd64bb8b17575fd9150482c989c92b298a2 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6184 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins * server/telnet: fix autocomplete for jimtcl commands Current autocomplete filters-out some command reported by "info commands". One of the filter rule concerns the command's private data. Every command registered by OpenOCD has its 'struct command' as private data. By ignoring commands without private data, we loose several TCL commands registered by jimtcl, e.g. 'foreach', 'llength'. By assuming that every command with non-NULL private data has 'struct command' as private data, we risk at best to access inconsistent data, at worst to trigger a segmentation fault. Export the already available functions: - to check if a command has been registered by OpenOCD and - to get the private data. While there, rename jimcmd_is_ocd_command() as jimcmd_is_oocd_command(). Don't filter-out jimtcl commands with no private data. Check the private data only on OpenOCD commands. Change-Id: Ib5bf8d2bc5c12440c0cfae438f637c38724a79b7 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6282 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> * helper/list.h: align file to Linux v5.12 Main improvement is in the doxygen comments. Minimize the delta with kernel file. Skip the functions hlist_unhashed_lockless() and __list_del_clearprev() that are relevant only in kernel. Remove gcc extension "omitted conditional operand". Change-Id: I2e9ddb54cfe2fa5f7cf18f44726acd144e1f98b9 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6276 Reviewed-by: <rdiezmail-openocd@yahoo.de> Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> * contrib: add an example of using list.h Change-Id: Ic3d399d7ad2e4d10677cf78d64968040941b74e5 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6280 Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com> * helper/list.h: add mention to the example in contrib Without such reference, it could be difficult to find the example. Change-Id: Ia9ffb06bc1a45446c2c7b53197ab3400e1d8a9e9 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6281 Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com> * tcl/target/stm32f4x: fix hardcoded chip name Fixes: c945d6e61605 ("tcl/target: start using the new TPIU/SWO support") Change-Id: I4543c9a204f7b4b3b14e6eabc5042653106aff0e Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6277 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins * Makefile: add special target .DELETE_ON_ERROR The special .DELETE_ON_ERROR deletes the target file on recipe error. Otherwise, an incomplete output file may be considered up to date the next time around. .DELETE_ON_ERROR provides reasonable protection at virtually no cost. Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Change-Id: I67dca47ae5ddf3786993c87b9991b3046a85f00b Reviewed-on: http://openocd.zylin.com/6235 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * gdb_server: Log both incoming and outgoing GDB packets - Made sure that also outgoing GDB packets are logged, not only the incoming ones. - Improved the treatment of non-printable characters in the packets to make it more robust. Prior to this change: - Outgoing packets were not printed unless OpenOCD was re-compiled with _DEBUG_GDB_IO_. - Non-prinable characters were only treated in incoming 'X' packets. After this change: - Both incoming and outgoing GDB packets are logged on debug_level >= 3, so that both directions of the GDB channel are visible. - Non-printable characters are checked for in every packet so that hey do not interfere with the terminal. Change-Id: I0613e57ae5059b3279b0abcb71276cf5719a8699 Signed-off-by: Jan Matyas <matyas@codasip.com> Reviewed-on: http://openocd.zylin.com/6269 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/renesas_rz_g2: Introduce tcl config file for RZ/G2 devices Initial support for Renesas RZ/G2 MPU family Change-Id: I5ca74cddfd0c105a5307de56c3ade7084f9c28d2 Signed-off-by: micbis <michele.bisogno.ct@renesas.com> Reviewed-on: http://openocd.zylin.com/6250 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * drivers/jlink: Remove trailing dots This makes the messages consistent with most of the rest of the OpenOCD output. Change-Id: I915a01187e7fc317e02483ac0bbd39ec077d6321 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6274 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target: Use 'bool' for 'reset_halt' Change-Id: I974a6360ea7467067511541ac212f2e9d3de7895 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6262 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * cmsis_dap: add support for swo commands Replaced mixed snake_case_CamelCase with snake_case. Define variables at first-use location. CMSIS-DAP SWO specification: https://arm-software.github.io/CMSIS_5/DAP/html/group__DAP__swo__gr.html Change-Id: Ieba79b16efd445143f964b614673d041aae74f92 Signed-off-by: Adrian Negreanu <adrian.negreanu@nxp.com> Reviewed-on: http://openocd.zylin.com/5820 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Add target_data_bits(). This is used to compute memory block read alignment, and specifically allows 64-bit targets to ensure that memory block reads are only requested on 64-bit boundaries. Signed-off-by: Tim Newsome <tim@sifive.com> Change-Id: Idb1a27b9fc02c46245556bb0f3d6d94b368c4817 Reviewed-on: http://openocd.zylin.com/6249 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Jan Matyas <matyas@codasip.com> Reviewed-by: Xiang W <wxjstz@126.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Avoid non-standard conditionals with omitted operands. Fixes bug #257. Change-Id: I05fc6468306d46399e769098e031e7e588798afc Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/6271 Tested-by: jenkins Reviewed-by: Xiang W <wxjstz@126.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/startup.tcl: Do not use 'Yoda conditions' Change-Id: I5e1bbaf032659dda1b365ef4ec6ea4a635d921ce Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6284 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Fix build. Change-Id: I4f2667db91f84f07af354691aac5d4c9e3aea3fa Signed-off-by: Tim Newsome <tim@sifive.com> Co-authored-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Co-authored-by: Antonio Borneo <borneo.antonio@gmail.com> Co-authored-by: Marc Schink <dev@zapb.de> Co-authored-by: R. Diez <rdiezmail-openocd@yahoo.de> Co-authored-by: Daniel Anselmi <danselmi@gmx.ch> Co-authored-by: Evgeniy Didin <didin@synopsys.com> Co-authored-by: Yasushi SHOJI <yashi@spacecubics.com> Co-authored-by: Tomas Vanek <vanekt@fbl.cz> Co-authored-by: Olivier DANET <odanet@caramail.com> Co-authored-by: Thomas Gleixner <tglx@linutronix.de> Co-authored-by: micbis <michele.bisogno.ct@renesas.com> Co-authored-by: Chengyu Zheng <chengyu.zheng@polimi.it> Co-authored-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Co-authored-by: Jan Matyas <matyas@codasip.com> Co-authored-by: Adrian Negreanu <adrian.negreanu@nxp.com>
2021-06-11 15:01:55 -05:00
set ap_num [expr {0x2 << ($ap_build_type & 3)}]
target/arc: Introduce Actionpoints support Actionpoint mechanism allows to setup HW breakpoints and watchpoints on Synopsys ARC CPUs. This mechanism is controlled by DEBUG register and by a set of auxilary registers. Each actionpoint is controlled by 3 aux registers: Actionpoint(AP) match mask(AP_AMM), AP match value(AP_AMV) and AP control(AC). Note: some fields of actionpoint_t structure will be used in further support of watchpoints. Change-Id: I4efb24675f247cc19d9122501c9e63c3126fcab4 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5763 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-07-10 06:52:35 -05:00
# Expression on top may produce 16 action points - which is a
# reserved value for now.
if { $ap_num < 16 } {
# Enable actionpoint registers
for {set i 0} {$i < $ap_num} {incr i} {
arc set-reg-exists ap_amv$i ap_amm$i ap_ac$i
}
# Set amount of actionpoints
arc num-actionpoints $ap_num
}
}
}
Introduce ARCv2 tcl config files With this commit we add tcl files which describes ARCv2 architecture features and configure files for ARCv2 EMSK board. Changes since v1: -Moved from http://openocd.zylin.com/#/c/5332/4 into separate commit. Changes: 22.01.2020: -Removed "actionpoints" handling code in tcl/cpu/arc/v2.tcl because this capability is not supported yet. Changes: 17.03.2020: -Update Licence headers -Cleanup indents -Removed "reset halt" in boards .tcl -Updated adapter frequency commands Changes: 15.03.2020: -Removed "init" in the of boards .tcl Change-Id: I51bf620abe7b8e046e1dccc861a7d963965d3a42 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5350 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-11-27 23:34:01 -06:00
# DCCM
set dccm_version [arc get-reg-field dccm_build version]
if { $dccm_version == 3 || $dccm_version == 4 } {
arc set-reg-exists aux_dccm
}
# ICCM
if { [arc get-reg-field iccm_build version] == 4 } {
arc set-reg-exists aux_iccm
}
# MPU
if { [arc get-reg-field mpu_build version] >= 2 &&
[arc get-reg-field mpu_build version] <= 4 } {
arc set-reg-exists mpu_en mpu_ecr
set mpu_regions [arc get-reg-field mpu_build regions]
for {set i 0} {$i < $mpu_regions} {incr i} {
arc set-reg-exists mpu_rdp$i mpu_rdb$i
}
# Secure MPU
if { [arc get-reg-field mpu_build version] == 4 } {
arc set-reg-exists mpu_index mpu_rstart mpu_rend mpu_rper
}
}
}
proc arc_v2_init_regs { } {
# XML features
set core_feature "org.gnu.gdb.arc.core.v2"
set aux_min_feature "org.gnu.gdb.arc.aux-minimal"
set aux_other_feature "org.gnu.gdb.arc.aux-other"
# Describe types
# Types are sorted alphabetically according to their name.
arc add-reg-type-struct -name ap_build_t -bitfield version 0 7 \
-bitfield type 8 11
arc add-reg-type-struct -name ap_control_t -bitfield at 0 3 -bitfield tt 4 5 \
-bitfield m 6 6 -bitfield p 7 7 -bitfield aa 8 8 -bitfield q 9 9
# Cycles field added in version 4.
arc add-reg-type-struct -name dccm_build_t -bitfield version 0 7 \
-bitfield size0 8 11 -bitfield size1 12 15 -bitfield cycles 17 19
arc add-reg-type-struct -name debug_t \
-bitfield fh 1 1 -bitfield ah 2 2 -bitfield asr 3 10 \
-bitfield is 11 11 -bitfield ep 19 19 -bitfield ed 20 20 \
-bitfield eh 21 21 -bitfield ra 22 22 -bitfield zz 23 23 \
-bitfield sm 24 26 -bitfield ub 28 28 -bitfield bh 29 29 \
-bitfield sh 30 30 -bitfield ld 31 31
arc add-reg-type-struct -name ecr_t \
-bitfield parameter 0 7 \
-bitfield cause 8 15 \
-bitfield vector 16 23 \
-bitfield U 30 30 \
-bitfield P 31 31
arc add-reg-type-struct -name iccm_build_t -bitfield version 0 7 \
-bitfield iccm0_size0 8 11 -bitfield iccm1_size0 12 15 \
-bitfield iccm0_size1 16 19 -bitfield iccm1_size1 20 23
arc add-reg-type-struct -name identity_t \
-bitfield arcver 0 7 -bitfield arcnum 8 15 -bitfield chipid 16 31
arc add-reg-type-struct -name isa_config_t -bitfield version 0 7 \
-bitfield pc_size 8 11 -bitfield lpc_size 12 15 -bitfield addr_size 16 19 \
-bitfield b 20 20 -bitfield a 21 21 -bitfield n 22 22 -bitfield l 23 23 \
-bitfield c 24 27 -bitfield d 28 31
arc add-reg-type-struct -name mpu_build_t -bitfield version 0 7 \
-bitfield regions 8 15 \
-bitfield s 16 16 \
-bitfield i 17 17
arc add-reg-type-struct -name mpu_ecr_t \
-bitfield MR 0 7 \
-bitfield VT 8 9 \
-bitfield EC_CODE 16 31
arc add-reg-type-struct -name mpu_en_t \
-bitfield UE 3 3 -bitfield UW 4 4 -bitfield UR 5 5 \
-bitfield KE 6 6 -bitfield KW 7 7 -bitfield KR 8 8 \
-bitfield S 15 15 -bitfield SID 16 23 \
-bitfield EN 30 30
arc add-reg-type-struct -name mpu_index_t \
-bitfield I 0 3 -bitfield M 30 30 -bitfield D 31 31
arc add-reg-type-struct -name mpu_rper_t \
-bitfield V 0 0 \
-bitfield UE 3 3 -bitfield UW 4 4 -bitfield UR 5 5 \
-bitfield KE 6 6 -bitfield KW 7 7 -bitfield KR 8 8 \
-bitfield S 15 15 -bitfield SID 16 23
arc add-reg-type-flags -name status32_t \
-flag H 0 -flag E0 1 -flag E1 2 -flag E2 3 \
-flag E3 4 -flag AE 5 -flag DE 6 -flag U 7 \
-flag V 8 -flag C 9 -flag N 10 -flag Z 11 \
-flag L 12 -flag DZ 13 -flag SC 14 -flag ES 15 \
-flag RB0 16 -flag RB1 17 -flag RB2 18 \
-flag AD 19 -flag US 20 -flag IE 31
# Core registers
set core_regs {
r0 0 uint32
r1 1 uint32
r2 2 uint32
r3 3 uint32
r4 4 uint32
r5 5 uint32
r6 6 uint32
r7 7 uint32
r8 8 uint32
r9 9 uint32
r10 10 uint32
r11 11 uint32
r12 12 uint32
r13 13 uint32
r14 14 uint32
r15 15 uint32
r16 16 uint32
r17 17 uint32
r18 18 uint32
r19 19 uint32
r20 20 uint32
r21 21 uint32
r22 23 uint32
r23 24 uint32
r24 24 uint32
r25 25 uint32
gp 26 data_ptr
fp 27 data_ptr
sp 28 data_ptr
ilink 29 code_ptr
r30 30 uint32
blink 31 code_ptr
r32 32 uint32
r33 33 uint32
r34 34 uint32
r35 35 uint32
r36 36 uint32
r37 37 uint32
r38 38 uint32
r39 39 uint32
r40 40 uint32
r41 41 uint32
r42 42 uint32
r43 43 uint32
r44 44 uint32
r45 45 uint32
r46 46 uint32
r47 47 uint32
r48 48 uint32
r49 49 uint32
r50 50 uint32
r51 51 uint32
r52 52 uint32
r53 53 uint32
r54 54 uint32
r55 55 uint32
r56 56 uint32
r57 57 uint32
accl 58 uint32
acch 59 uint32
lp_count 60 uint32
limm 61 uint32
reserved 62 uint32
pcl 63 code_ptr
}
foreach {reg count type} $core_regs {
arc add-reg -name $reg -num $count -core -type $type -g \
-feature $core_feature
}
# AUX min
set aux_min {
0x6 pc code_ptr
0x2 lp_start code_ptr
0x3 lp_end code_ptr
0xA status32 status32_t
}
foreach {num name type} $aux_min {
arc add-reg -name $name -num $num -type $type -feature $aux_min_feature -g
}
# AUX other
set aux_other {
0x004 identity identity_t
0x005 debug debug_t
0x018 aux_dccm int
0x208 aux_iccm int
target/arc: Introduce Actionpoints support Actionpoint mechanism allows to setup HW breakpoints and watchpoints on Synopsys ARC CPUs. This mechanism is controlled by DEBUG register and by a set of auxilary registers. Each actionpoint is controlled by 3 aux registers: Actionpoint(AP) match mask(AP_AMM), AP match value(AP_AMV) and AP control(AC). Note: some fields of actionpoint_t structure will be used in further support of watchpoints. Change-Id: I4efb24675f247cc19d9122501c9e63c3126fcab4 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5763 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-07-10 06:52:35 -05:00
0x220 ap_amv0 uint32
0x221 ap_amm0 uint32
0x222 ap_ac0 ap_control_t
0x223 ap_amv1 uint32
0x224 ap_amm1 uint32
0x225 ap_ac1 ap_control_t
0x226 ap_amv2 uint32
0x227 ap_amm2 uint32
0x228 ap_ac2 ap_control_t
0x229 ap_amv3 uint32
0x22A ap_amm3 uint32
0x22B ap_ac3 ap_control_t
0x22C ap_amv4 uint32
0x22D ap_amm4 uint32
0x22E ap_ac4 ap_control_t
0x22F ap_amv5 uint32
0x230 ap_amm5 uint32
0x231 ap_ac5 ap_control_t
0x232 ap_amv6 uint32
0x233 ap_amm6 uint32
0x234 ap_ac6 ap_control_t
0x235 ap_amv7 uint32
0x236 ap_amm7 uint32
0x237 ap_ac7 ap_control_t
Introduce ARCv2 tcl config files With this commit we add tcl files which describes ARCv2 architecture features and configure files for ARCv2 EMSK board. Changes since v1: -Moved from http://openocd.zylin.com/#/c/5332/4 into separate commit. Changes: 22.01.2020: -Removed "actionpoints" handling code in tcl/cpu/arc/v2.tcl because this capability is not supported yet. Changes: 17.03.2020: -Update Licence headers -Cleanup indents -Removed "reset halt" in boards .tcl -Updated adapter frequency commands Changes: 15.03.2020: -Removed "init" in the of boards .tcl Change-Id: I51bf620abe7b8e046e1dccc861a7d963965d3a42 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5350 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-11-27 23:34:01 -06:00
0x400 eret code_ptr
0x401 erbta code_ptr
0x402 erstatus status32_t
0x403 ecr ecr_t
0x404 efa data_ptr
0x409 mpu_en mpu_en_t
0x412 bta code_ptr
0x420 mpu_ecr mpu_ecr_t
0x422 mpu_rdb0 int
0x423 mpu_rdp0 int
0x424 mpu_rdb1 int
0x425 mpu_rdp1 int
0x426 mpu_rdb2 int
0x427 mpu_rdp2 int
0x428 mpu_rdb3 int
0x429 mpu_rdp3 int
0x42A mpu_rdb4 int
0x42B mpu_rdp4 int
0x42C mpu_rdb5 int
0x42D mpu_rdp5 int
0x42E mpu_rdb6 int
0x42F mpu_rdp6 int
0x430 mpu_rdb7 int
0x431 mpu_rdp7 int
0x432 mpu_rdb8 int
0x433 mpu_rdp8 int
0x434 mpu_rdb9 int
0x435 mpu_rdp9 int
0x436 mpu_rdb10 int
0x437 mpu_rdp10 int
0x438 mpu_rdb11 int
0x439 mpu_rdp11 int
0x43A mpu_rdb12 int
0x43B mpu_rdp12 int
0x43C mpu_rdb13 int
0x43D mpu_rdp13 int
0x43E mpu_rdb14 int
0x43F mpu_rdp14 int
0x440 mpu_rdb15 int
0x441 mpu_rdp15 int
0x448 mpu_index mpu_index_t
0x449 mpu_rstart uint32
0x44A mpu_rend uint32
0x44B mpu_rper mpu_rper_t
0x44C mpu_probe uint32
}
foreach {num name type} $aux_other {
arc add-reg -name $name -num $num -type $type -feature $aux_other_feature
}
# AUX BCR
set bcr {
0x6D mpu_build
0x74 dccm_build
0x76 ap_build
0x78 iccm_build
0xC1 isa_config
}
foreach {num reg} $bcr {
arc add-reg -name $reg -num $num -type ${reg}_t -bcr -feature $aux_other_feature
}
[target current] configure \
-event examine-end "arc_v2_examine_target [target current]"
}
proc arc_v2_reset { {target ""} } {
arc_common_reset $target
target/arc: Introduce Actionpoints support Actionpoint mechanism allows to setup HW breakpoints and watchpoints on Synopsys ARC CPUs. This mechanism is controlled by DEBUG register and by a set of auxilary registers. Each actionpoint is controlled by 3 aux registers: Actionpoint(AP) match mask(AP_AMM), AP match value(AP_AMV) and AP control(AC). Note: some fields of actionpoint_t structure will be used in further support of watchpoints. Change-Id: I4efb24675f247cc19d9122501c9e63c3126fcab4 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5763 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-07-10 06:52:35 -05:00
# Disable all actionpoints. Cannot write via regcache yet, because it will
# not be flushed and all changes to registers will get lost. Therefore has
# to write directly via JTAG layer...
set num_ap [arc num-actionpoints]
for {set i 0} {$i < $num_ap} {incr i} {
From upstream (#620) * cortex_m: use unsigned int for FPB and DWT quantifiers related quantifiers are: - fp_num_lit - fp_num_code - dwt_num_comp - dwt_comp_available Change-Id: I07dec2d4aa21bc0e580be0d9fd0a6809f876c2a8 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6185 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * telnet: allow hiding selected commands during auto-completion We have TCL procedure and commands that we do not want to show in the list of auto-completion. E.g. TCL wrappers for deprecated commands, internal procedures that are not supposed to be exposed to user, or even commands that the user decides to hide. Create a TCL procedure to be called by telnet auto-complete code in place of the hard-coded TCL command. The procedure will run the same command and will filter-out the unwanted command names. Initialize the list of commands to be filtered-out with the name of the TCL procedure above, as it is considered as internal. Change-Id: I2d83bbf8194502368c589c85cccb617e69128c69 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6194 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> * telnet/auto-complete: hide deprecated and internal commands For both: - TCL proc that redirect deprecated commands to the new commands, - TCL proc used internally and not supposed to be exposed to user, add their name to the list of commands that should be hide by the telnet auto-complete. Change-Id: I05237c6a79334b7d2b151dfb129fb57b2f40bba6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6195 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> * startup.tcl: prepare for jimtcl 0.81 'expr' syntax change Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. Modify the script startup.tcl compiled-in OpenOCD binary to comply with the new jimtcl. Change-Id: I520dcafacadaa289a815035f93f250447ca66ea0 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6158 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * tcl: [1/3] prepare for jimtcl 0.81 'expr' syntax change Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. In the TCL scripts distributed with OpenOCD there are 1700+ lines that should be modified before switching to jimtcl 0.81. Apply the script below on every script in tcl folder. It fixes more than 92% of the lines %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- #!/usr/bin/perl -Wpi my $re_sym = qr{[a-z_][a-z0-9_]*}i; my $re_var = qr{(?:\$|\$::)$re_sym}; my $re_const = qr{0x[0-9a-f]+|[0-9]+|[0-9]*\.[0-9]*}i; my $re_item = qr{(?:~\s*)?(?:$re_var|$re_const)}; my $re_op = qr{<<|>>|[+\-*/&|]}; my $re_expr = qr{( (?:\(\s*(?:$re_item|(?-1))\s*\)|$re_item) \s*$re_op\s* (?:$re_item|(?-1)|\(\s*(?:$re_item|(?-1))\s*\)) )}x; # [expr [dict get $regsC100 SYM] + HEXNUM] s/\[expr (\[dict get $re_var $re_sym\s*\] \+ *$re_const)\]/\[expr \{$1\}\]/; # [ expr (EXPR) ] # [ expr EXPR ] # note: $re_expr captures '$3' s/\[(\s*expr\s*)\((\s*$re_expr\s*)\)(\s*)\]/\[$1\{$2\}$4\]/; s/\[(\s*expr\s*)($re_expr)(\s*)\]/\[$1\{$2\}$4\]/; %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: I0d6bddc6abf6dd29062f2b4e72b5a2b5080293b9 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6159 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * tcl: [2/3] prepare for jimtcl 0.81 'expr' syntax change Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. Enclose within double quote the argument of 'expr' when there is the need to concatenate strings. Change-Id: Ic0ea990ed37337a7e6c3a99670583685b570b8b1 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6160 Tested-by: jenkins * tcl: [3/3] prepare for jimtcl 0.81 'expr' syntax change Jimtcl commit 1843b79a03dd ("expr: TIP 526, only support a single arg") drops the support for multi-argument syntax for the TCL command 'expr'. Fix manually the remaining lines that don't match simple patterns and would require dedicated boring scripting. Remove the 'expr' command where appropriate. Change-Id: Ia75210c8447f88d38515addab4a836af9103096d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6161 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/stm8: Make 'stm8_command_handlers' static Change-Id: I5237a8f2a1ecba9383672e37bd56f8ccd17598b6 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6200 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/riscv: Change 'authdata_read' output Use a constant output length and remove the line break to make the authentication data easier to parse. Change-Id: Iebbf1f171947ef89b0f360a2cb286a4ea15c6ba5 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6199 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tim Newsome <tim@sifive.com> * Enable adapter "Bus Pirate" by default. The Bus Pirate is now listed in the "OpenOCD configuration summary" too. Change-Id: Ieb7bf9134af456ebe9803f3108a243204fb2a62d Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/5637 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * coding-style: additional style for C code To improve readability and to push more uniform code style. Prefer 'if (false) {...}' for unused code so it get checked by the compiler. Define preferred indentation for 'switch' statement. Require balanced brackets in 'if/else'. Report the max line length. Report the formatting strings for stdint/inttypes types. Report the type 'target_addr_t'. Prefer 'unsigned int' to 'unsigned'. Change-Id: I0192a4ed298f6c6c432764fdd156cffd4b13fc89 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6203 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Marc Schink <dev@zapb.de> * Add IPDBG JtagHost functionality to OpenOCD IPDBG are utilities to debug IP-cores. It uses JTAG for transport to/from the FPGA. The different UIs use TCP/IP as transport. The JtagHost makes the bridge between these two. Comparable to the bridge between GDB and the in-circuit- debugging-unit of a micro controller. Change-Id: Ib1bc10dcbd4ea426e492bb7b2d85c1ed1b7a8d5a Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: http://openocd.zylin.com/5938 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * flash/nor/xcf: Do not use 'Yoda conditions' Change-Id: I17308f5237338ce468e5b86289a0634429deaaa9 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6201 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * cortex_m: add armv8m special registers Change-Id: I1942f375a5f4282ad1fe4a2ff3b8f3cbc64d8f7f Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6016 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * rtos: Add support for Zephyr RTOS With this patch, the Zephyr[1] RTOS is supported by OpenOCD. As usual with support for other RTOSes, Zephyr must be compiled with the DEBUG_THREAD_INFO option. This will generate some symbols with information needed in order to build the list of threads. The current implementation is limited to Zephyr running on ARM Cortex-M processors. This is the only ARM variant supported by Zephyr at the moment and is used on most of the officially supported boards. [1] https://www.zephyrproject.org/ Change-Id: I22afdbec91562f3a22cf5b88cd4ea3a7a59ba0b4 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Signed-off-by: Leandro Pereira <leandro.pereira@intel.com> Signed-off-by: Daniel Glöckner <dg@emlix.com> Reviewed-on: http://openocd.zylin.com/4988 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/armv7m.h: [style] replace tab with space between variable type and name Change-Id: I9740c25857295a2a655d3046322a3f23f0ee7f78 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6230 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * server: gdb_server: Add colon for target extended-remote Both GDB commands "target remote" and "target extended-remote" require to have ":" right before port number. e.g. (gdb) target extended-remote :3333 Add ":" to the warning message so that users can copy & past it. Change-Id: Id6d8ec1e4dfd3c12cb7f3b314064f2c35fa7ab55 Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Reviewed-on: http://openocd.zylin.com/6237 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * jimtcl: restrict memory leak workaround on Linux only The workaround for jimtcl 0.80 in commit 36ae487ed04b ("jimtcl: add temporary workaround for memory leak in jimtcl 0.80") issues a compile time error on macOS: ../src/helper/command.c:157:22: error: aliases are not supported on darwin __attribute__((weak, alias("workaround_createcommand"))); The OS is x86_64-apple-darwin19.6.0 and the compiler used is x86_64-apple-darwin13.4.0-clang. Restrict the workaround on Linux host only. The fix for 'expr' syntax change is already merged and the workaround will be dropped soon. Change-Id: I925109a9c57c05f8c95b70bc7d6604eb1172cd79 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reported-by: Adam Jeliński <ajelinski@users.sourceforge.net> Fixes: 36ae487ed04b ("jimtcl: add temporary workaround for memory leak in jimtcl 0.80") Fixes: https://sourceforge.net/p/openocd/tickets/304/ Reviewed-on: http://openocd.zylin.com/6241 Tested-by: jenkins * target/armv7m: fix static analyzer warning Despite of assert(is_packed) clang static analyser complains on use of the uninitialized offset variable. Cross compiling with latest x86_64-w64-mingw32-gcc hits warnings src/target/armv7m.c: In function ‘armv7m_read_core_reg’: src/target/armv7m.c:337:54: error: ‘reg32_id’ may be used uninitialized in this function [-Werror=maybe-uninitialized] It happens because mingw32 defines assert() without the attribute "noreturn", whatever NDEBUG is defined or not. Replace assert(is_packed) by if (is_packed) conditional and call assert(false) in the else branch. Change-Id: Id3c7dcccb65106e28be200b9a4d2b642f4d31019 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/6256 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Andrzej Sierżęga <asier70@gmail.com> * cmsis_dap: fix build on macOS Compile fails with error: src/jtag/drivers/cmsis_dap.c:683:28: error: format specifies type 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] " received 0x%" PRIx8, CMD_DAP_TFER, resp[0]); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ Fix the format specifier. Change-Id: I0a5a1a35452d634019989d14d849501fb8a7e93a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6255 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * cortex_m: do not perform soft_reset_halt on targets without VECTRESET Change-Id: Ib3df457e0afe4e342c82ad1af25e03aad6979d87 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6209 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * cortex_m: fix VECTRESET detection for ARMv6-M cores VECTRESET check should be done after verifying if the core is an ARMv6-M core, and not before that. Fixes: 2dc9c1df81b6 ("cortex_m: [FIX] ARMv8-M does not support VECTRESET") Change-Id: I8306affd332b3a35cea69bba39ef24ca71244273 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6232 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/arm_dpm: rename 'wp_pc' as 'wp_addr' The field 'wp_pc' was originally introduced in commit 55eeea7fceb6 ("ARMv7a/Cortex-A8: report watchpoint trigger insn") in end 2009 to contain the address of the instruction which triggered a watchpoint. Later on with commit 651b861d5d5f ("target/aarch64: Add watchpoint support") it has been reused in to hold directly the memory address that triggered a watchpoint. Rename 'wp_pc' as 'wp_addr' and change its doxygen description. While there, fix the format string to print the field. Change-Id: I2e5ced1497e4a6fb6b38f91e881807512e8d8c47 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6204 Tested-by: jenkins Reviewed-by: Liming Sun <limings@nvidia.com> * target/aarch64: fix watchpoint management The early documentation for armv8a report the debug register WFAR as containing the address of the instruction that triggered the watchpoint. More recent documentation report the register EDWAR as containing the data memory address that triggered the watchpoint. The name of macros CPUV8_DBG_WFAR0 and CPUV8_DBG_WFAR1 is not correct as they point to the debug register EDWAR, so reading such register returns directly the data memory address that triggered the watchpoint. The code incorrectly passes this address value to the function armv8_dpm_report_wfar(); this function is supposed to adjust the PC value, decrementing it to remove the effects of the CPU pipeline. This pipeline offset, that has no meaning on the value in EDWAR, caused commit 651b861d5d5f ("target/aarch64: Add watchpoint support") to add back the offset while comparing the address with the watchpoint enabled. The upper 32 bits of EDWAR are not valid in aarch32 mode and have to be ignored. Rename CPUV8_DBG_WFAR0/1 as CPUV8_DBG_EDWAR0/1. Remove the function armv8_dpm_report_wfar(). Remove the offset while searching the matching watchpoint. Ignore the upper 32 bits of EDWAR in aarch32 mode. Fix a comment and the LOG text. Change-Id: I7cbdbeb766fa18e31cc72be098ca2bc501877ed1 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6205 Tested-by: jenkins Reviewed-by: Liming Sun <limings@nvidia.com> * flash/stm32l4x: add missing break statement this is not a bug fix, this for loop will issue only one match adding the break will save unnecessary more loops. Change-Id: Ic1484ea8cdea1b284eb570f9e3e7818e07daf5cd Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6248 Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: jenkins * github/action: create a permanent 'latest' release this commit extends the existing snapshot action to create a release named 'latest' with the built binaries for windows. this 'latest' release will be updated after every push to github. Change-Id: I75a64c598169241743add3ac9aa7a0337fbab7f2 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6127 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * tcl/rp2040: remove empty line at end of file Change-Id: I212a96b77282b151a8ecbd46a6436e2bbbda4161 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6221 Tested-by: jenkins * tcl: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. While there, fix one indentation. Change-Id: I72369ed26f363bacd760b40b8c83dd95e89d28a4 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6214 Tested-by: jenkins * flash: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. Change-Id: Ia5f134c91beb483fd865df9e4877e0ec3e789478 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6215 Tested-by: jenkins * jtag: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. Change-Id: I101c76a638805d77c1ff356cf0f027552389e5d3 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6216 Tested-by: jenkins * target: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. Change-Id: I548581247db72e683249749d1b8725035530b06e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6217 Tested-by: jenkins * openocd: fix some minor typo Minor typos found by the new checkpatch boosted by the dictionary provided by 'codespell'. Change-Id: I7b4cae1798ff5ea048fcbc671a397af763fdc605 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6218 Tested-by: jenkins * Document the buspirate interface driver. Change-Id: Iaff13fc5187041a840f4f00eb6b4ee52880cf47e Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/6231 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Warn on undefined preprocessor symbols Preprocessor directives like "#if SYMBOL" silently replace undefined or misspelt symbols with 0, which makes configuration bugs hard to spot. Compiler flag "-Wundef" prevents such errors. Change-Id: I91b7ba2db02ef0c3c452d334601c53aebda4660e Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/6238 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Remove compatibility macros m4_ifblank and m4_ifnblank They are at least since Autoconf 2.67 present, and we are requiring version 2.69. Change-Id: I41b33d4ebe02198f03cdddcc4a3c1beedd993d78 Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/6239 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * configure.ac: use a separate folder for Autoconf-generated files Autoconf generates several files in root folder of the project. Keep the root folder cleaner by specifying subfolder 'build-aux'. Align .gitignore accordingly. Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Change-Id: Ied87faba495d9eeb8f98e78c2e2b7e7e596febfb Reviewed-on: http://openocd.zylin.com/6236 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * helper/command: silent debug msg on command register/unregister Commit e216186fab59 ("helper/command: register full-name commands in jim") and commit a7d68878e4ba ("helper/command: unregister commands through their full-name") introduce a LOG_DEBUG() message each for command registration and unregistration. The messages above are quite noisy and pollute the log when debug_level is 3 or higher. They can be useful to debug the command registration logic, but for the other debug activities on OpenOCD are just noisy. Already commit a03ac1ba3087 ("helper/command: disable logging of registered commands [RFC]") was merged to silent the first case that is now back with additional logs. Silent both log messages. Use 'if (false)' to silent them, making easy to re-enable it when or if someone needs it. Change-Id: Id8a067e60e822d4ecbddcb036d081298f7e6181f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6220 Tested-by: jenkins * mem_ap: fix target arch_info type The target mem_ap appears as an ARM target, thus it allows the execution of ARM specific commands causing the crash of OpenOCD. E.g. 'arm mrc ...' can be executed and segfaults. Replace the incorrect ARM magic number with a dedicated one. While there, remove the 'struct arm', that is now holding only the mem_ap's dap, and replace it with a pointer to the dap. Change-Id: I881332d3fdf8d8f8271b8711607737b052a5699b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6213 Tested-by: jenkins * riscv: drop unused variable The array newly_halted[] is assigned but its value is never used. Drop it! Change-Id: I678812a31c45a3ec03716e3eee6a30b8e8947926 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6257 Tested-by: jenkins Reviewed-by: Xiang W <wxjstz@126.com> Reviewed-by: Tim Newsome <tim@sifive.com> * riscv: replace macro DIM() with ARRAY_SIZE() OpenOCD already defines the macro ARRAY_SIZE, while riscv code uses a local macro DIM. Prefer using the macro ARRAY_SIZE() instead of DIM(). Not all the riscv code has been upstreamed, yes; this patch only covers the code already upstreamed. Change-Id: I89a58a6d91916d85c53ba5e4091b558271f8d618 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6258 Reviewed-by: Xiang W <wxjstz@126.com> Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com> * target/zynqmp : Add AXI AP access port The Xilinx Zynq UltraScale+ SoC have an "AXI-AP" access port for direct memory accesses without halting CPUs. Change-Id: I6303331c217795657575de4759444938e775dee1 Signed-off-by: Olivier DANET <odanet@caramail.com> Reviewed-on: http://openocd.zylin.com/6263 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * drivers/versaloon: use ARRAY_SIZE() Replace the custom macro dimof() with the OpenOCD macro ARRAY_SIZE(). Change-Id: I2fe638444f6c16f2a78c1fd558b21550f76282d6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6259 Tested-by: jenkins Reviewed-by: Xiang W <wxjstz@126.com> * openocd: use macro ARRAY_SIZE() There are still few cases where the macro ARRAY_SIZE() should be used in place of custom code. Use ARRAY_SIZE() whenever possible. Change-Id: Iba0127a02357bc704fe639e08562a4f9aa7011df Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6260 Reviewed-by: Xiang W <wxjstz@126.com> Tested-by: jenkins * rtos: use ARRAY_SIZE() and simplify rtos_type.create() Use the existing macro ARRAY_SIZE(). Rewrite the functions rtos_type.create() to simplify the logic. Change-Id: I8833354767045d1642801d26944c9087a77add00 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6261 Tested-by: jenkins * tcl: remove remaining deprecated commands There are still few adapter_khz, ftdi_location, jtag_nsrst_delay and xds110_serial strolling around ... Change-Id: I3e8503dcc3875e3c92e6536f3d455a5e448d51ff Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6270 Tested-by: jenkins * help text: remove trailing space Some help text end with a useless space character. Remove it. Change-Id: I397e1194fac8042f0fab694222f925f906716de3 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6222 Tested-by: jenkins * help: fix line size in 'usage' output The implementation of command 'usage' is broken while checking the line limit of 76 chars per line (e.g. 'usage load_image') and the line wrapping is not correct. The same broken code is used for the first output line of command 'help' too. When call command_help_show_wrap(), include the command's name in the string so the whole text would be wrapped. Change-Id: Idece01ce54994db7e851d8522435ff764b11f3ac Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6223 Tested-by: jenkins * LICENSES: Add the MIT license Add the full text of the MIT license to the kernel tree. It was copied directly from: https://spdx.org/licenses/MIT.html#licenseText Add the required tags for reference and tooling. Change-Id: I94a5dea5ced6421809ea2a3448f8dda19a93f5c9 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6219 Tested-by: jenkins * stlink: add comment of firmware version for each flag bit Change-Id: I7f7c7b9c9cfd88125f82662ed864a2c0715140b1 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6211 Tested-by: jenkins * stlink: reorder the flag macro by firmware release The corresponding bit for each macro is changed, but this is not relevant in the code. Change-Id: I7039464f5a3d55d008208f44952aadeb815bd5a3 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6212 Tested-by: jenkins * tcl/board: Add ST NUCLEO-8S208RB Change-Id: I384c6ad9b4cbabbc004160677f600d8c4bd3eb71 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6268 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/arm_adi_v5: Fix clear sticky overrun flag during replay of commands When a WAIT occurs the commands after the WAIT are replayed and the STICKYORUN is cleared. However if another WAIT occurs during the command replay, the command itself is resent but the STICKYORUN bit shall also be cleared. If this is not done, the MEM-AP hangs. Change-Id: I14e8340cd5d8f58f4de31509da96cfa2ecb630d1 Signed-off-by: micbis <michele.bisogno.ct@renesas.com> Reviewed-on: http://openocd.zylin.com/6278 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * target/cortex_a: add support for watchpoints The current implementation of OpenOCD does not support watchpoints for cortex_a architecture. So, I replaced the add_watchpoint and remove_watchpoint with the specific implementation for the cortex a and using the breakpoint implementation and the arm documentation [1] as reference. In particular, I have made the following changes: * added the following functions - cortex_a_add_watchpoint This wrapper function check whether there are any watchpoint available on the target device by calling cortex_a_set_watchpoint. - cortex_a_set_watchpoint This function is responsible for settings the watchpoint register pair. In particular, it sets the WVR and the WCR registers with the cortex_a_dap command. - cortex_a_remove_watchpoint This wrapper function the selected watchpoint on the target device by calling cortex_a_unset_watchpoint. - cortex_a_unset_watchpoint This function sets both the WVR and the WCR registers to zero, thus unsetting the watchpoint. [1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0464f/BCGDHIEJ.html Change-Id: I86611dab474cb84836662af572b17636dc68e282 Signed-off-by: Chengyu Zheng <chengyu.zheng@polimi.it> Reviewed-on: http://openocd.zylin.com/3913 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins * target/cortex_a: fix number of watchpoints Decrement the available watchpoints only when succeed setting it. Initialize the available watchpoint with the correct value. Change-Id: I0f93b347300b8ebedbcd9e718d4ba32b26cf6846 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6196 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * target/cortex_a: add support for watchpoint length of 1, 2 and 4 bytes Use byte address select for 1 and 2 bytes length. Use normal mode for 4 bytes length. Change-Id: I28d182f25145d0635de64d0361d456f1ad96640e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6197 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * target/cortex_a: fix memory leak on watchpoints The memory allocated to hold the watchpoints is not freed at OpenOCD exit. Free the watchpoint memory at OpenOCD exit. Change-Id: I518c9ce0dc901cde2913d752e3154734f878b854 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6210 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * helper/jim-nvp: comply with coding style [1/2] The helper jim-nvp does not comply with OpenOCD coding style due to typedef of struct and CamelCase symbol names. While it's trivial fixing the helper and all its current use in the code, changing these APIs will potentially break a number of patches pending in gerrit. Gerrit will not trigger any alert, but the code will generate compile error after the merge. Add the compile flag "-Wno-error=deprecated-declarations" to keep as warning (not as error) the use of "deprecated" functions and types. Rename all the CamelCase symbols is lowercase and provide struct prototypes in place of the typedef. Add a DEPRECATED section to 'jim-nvp.h' where the old CamelCase symbols and the old typedef are re-declared with compile attribute 'deprecated'. With this change OpenOCD compiles, but generates warnings. The remaining changes allover OpenOCD code will be fixed in a separate patch for easier review. The patches merged later that still use the old deprecated API will compile with warnings. This will permit to identify and fix these cases. Change-Id: I786385d0f662dbb1be5be313ae42623156d68ce5 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6183 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de> * helper/jim-nvp: comply with coding style [2/2] With the API fixed to comply with OpenOCD coding style, fix all the references in the code. Patch generated automatically with the script below. The list is in reverse order to replace a common prefix after the replacement of the symbols with the same prefix. %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- (cat << EOF Jim_SetResult_NvpUnknown jim_set_result_nvp_unknown Jim_Nvp_value2name_simple jim_nvp_value2name_simple Jim_Nvp_value2name_obj jim_nvp_value2name_obj Jim_Nvp_value2name jim_nvp_value2name Jim_Nvp_name2value_simple jim_nvp_name2value_simple Jim_Nvp_name2value_obj_nocase jim_nvp_name2value_obj_nocase Jim_Nvp_name2value_obj jim_nvp_name2value_obj Jim_Nvp_name2value_nocase_simple jim_nvp_name2value_nocase_simple Jim_Nvp_name2value_nocase jim_nvp_name2value_nocase Jim_Nvp_name2value jim_nvp_name2value Jim_Nvp struct jim_nvp Jim_GetOpt_Wide jim_getopt_wide Jim_GetOpt_String jim_getopt_string Jim_GetOpt_Setup jim_getopt_setup Jim_GetOpt_Obj jim_getopt_obj Jim_GetOpt_NvpUnknown jim_getopt_nvp_unknown Jim_GetOpt_Nvp jim_getopt_nvp Jim_GetOpt_Enum jim_getopt_enum Jim_GetOpt_Double jim_getopt_double Jim_GetOpt_Debug jim_getopt_debug Jim_GetOptInfo struct jim_getopt_info Jim_GetNvp jim_get_nvp Jim_Debug_ArgvString jim_debug_argv_string EOF ) | while read a b; do sed -i "s/$a/$b/g" $(find src -type f ! -name jim-nvp.\? ) done %<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<--- Change-Id: I10a12bd64bb8b17575fd9150482c989c92b298a2 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6184 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins * server/telnet: fix autocomplete for jimtcl commands Current autocomplete filters-out some command reported by "info commands". One of the filter rule concerns the command's private data. Every command registered by OpenOCD has its 'struct command' as private data. By ignoring commands without private data, we loose several TCL commands registered by jimtcl, e.g. 'foreach', 'llength'. By assuming that every command with non-NULL private data has 'struct command' as private data, we risk at best to access inconsistent data, at worst to trigger a segmentation fault. Export the already available functions: - to check if a command has been registered by OpenOCD and - to get the private data. While there, rename jimcmd_is_ocd_command() as jimcmd_is_oocd_command(). Don't filter-out jimtcl commands with no private data. Check the private data only on OpenOCD commands. Change-Id: Ib5bf8d2bc5c12440c0cfae438f637c38724a79b7 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6282 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> * helper/list.h: align file to Linux v5.12 Main improvement is in the doxygen comments. Minimize the delta with kernel file. Skip the functions hlist_unhashed_lockless() and __list_del_clearprev() that are relevant only in kernel. Remove gcc extension "omitted conditional operand". Change-Id: I2e9ddb54cfe2fa5f7cf18f44726acd144e1f98b9 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6276 Reviewed-by: <rdiezmail-openocd@yahoo.de> Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> * contrib: add an example of using list.h Change-Id: Ic3d399d7ad2e4d10677cf78d64968040941b74e5 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6280 Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com> * helper/list.h: add mention to the example in contrib Without such reference, it could be difficult to find the example. Change-Id: Ia9ffb06bc1a45446c2c7b53197ab3400e1d8a9e9 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6281 Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com> * tcl/target/stm32f4x: fix hardcoded chip name Fixes: c945d6e61605 ("tcl/target: start using the new TPIU/SWO support") Change-Id: I4543c9a204f7b4b3b14e6eabc5042653106aff0e Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6277 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins * Makefile: add special target .DELETE_ON_ERROR The special .DELETE_ON_ERROR deletes the target file on recipe error. Otherwise, an incomplete output file may be considered up to date the next time around. .DELETE_ON_ERROR provides reasonable protection at virtually no cost. Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Change-Id: I67dca47ae5ddf3786993c87b9991b3046a85f00b Reviewed-on: http://openocd.zylin.com/6235 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * gdb_server: Log both incoming and outgoing GDB packets - Made sure that also outgoing GDB packets are logged, not only the incoming ones. - Improved the treatment of non-printable characters in the packets to make it more robust. Prior to this change: - Outgoing packets were not printed unless OpenOCD was re-compiled with _DEBUG_GDB_IO_. - Non-prinable characters were only treated in incoming 'X' packets. After this change: - Both incoming and outgoing GDB packets are logged on debug_level >= 3, so that both directions of the GDB channel are visible. - Non-printable characters are checked for in every packet so that hey do not interfere with the terminal. Change-Id: I0613e57ae5059b3279b0abcb71276cf5719a8699 Signed-off-by: Jan Matyas <matyas@codasip.com> Reviewed-on: http://openocd.zylin.com/6269 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/renesas_rz_g2: Introduce tcl config file for RZ/G2 devices Initial support for Renesas RZ/G2 MPU family Change-Id: I5ca74cddfd0c105a5307de56c3ade7084f9c28d2 Signed-off-by: micbis <michele.bisogno.ct@renesas.com> Reviewed-on: http://openocd.zylin.com/6250 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * drivers/jlink: Remove trailing dots This makes the messages consistent with most of the rest of the OpenOCD output. Change-Id: I915a01187e7fc317e02483ac0bbd39ec077d6321 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6274 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target: Use 'bool' for 'reset_halt' Change-Id: I974a6360ea7467067511541ac212f2e9d3de7895 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6262 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * cmsis_dap: add support for swo commands Replaced mixed snake_case_CamelCase with snake_case. Define variables at first-use location. CMSIS-DAP SWO specification: https://arm-software.github.io/CMSIS_5/DAP/html/group__DAP__swo__gr.html Change-Id: Ieba79b16efd445143f964b614673d041aae74f92 Signed-off-by: Adrian Negreanu <adrian.negreanu@nxp.com> Reviewed-on: http://openocd.zylin.com/5820 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Add target_data_bits(). This is used to compute memory block read alignment, and specifically allows 64-bit targets to ensure that memory block reads are only requested on 64-bit boundaries. Signed-off-by: Tim Newsome <tim@sifive.com> Change-Id: Idb1a27b9fc02c46245556bb0f3d6d94b368c4817 Reviewed-on: http://openocd.zylin.com/6249 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Jan Matyas <matyas@codasip.com> Reviewed-by: Xiang W <wxjstz@126.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Avoid non-standard conditionals with omitted operands. Fixes bug #257. Change-Id: I05fc6468306d46399e769098e031e7e588798afc Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/6271 Tested-by: jenkins Reviewed-by: Xiang W <wxjstz@126.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/startup.tcl: Do not use 'Yoda conditions' Change-Id: I5e1bbaf032659dda1b365ef4ec6ea4a635d921ce Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6284 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Fix build. Change-Id: I4f2667db91f84f07af354691aac5d4c9e3aea3fa Signed-off-by: Tim Newsome <tim@sifive.com> Co-authored-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Co-authored-by: Antonio Borneo <borneo.antonio@gmail.com> Co-authored-by: Marc Schink <dev@zapb.de> Co-authored-by: R. Diez <rdiezmail-openocd@yahoo.de> Co-authored-by: Daniel Anselmi <danselmi@gmx.ch> Co-authored-by: Evgeniy Didin <didin@synopsys.com> Co-authored-by: Yasushi SHOJI <yashi@spacecubics.com> Co-authored-by: Tomas Vanek <vanekt@fbl.cz> Co-authored-by: Olivier DANET <odanet@caramail.com> Co-authored-by: Thomas Gleixner <tglx@linutronix.de> Co-authored-by: micbis <michele.bisogno.ct@renesas.com> Co-authored-by: Chengyu Zheng <chengyu.zheng@polimi.it> Co-authored-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Co-authored-by: Jan Matyas <matyas@codasip.com> Co-authored-by: Adrian Negreanu <adrian.negreanu@nxp.com>
2021-06-11 15:01:55 -05:00
arc jtag set-aux-reg [expr {0x222 + $i * 3}] 0
target/arc: Introduce Actionpoints support Actionpoint mechanism allows to setup HW breakpoints and watchpoints on Synopsys ARC CPUs. This mechanism is controlled by DEBUG register and by a set of auxilary registers. Each actionpoint is controlled by 3 aux registers: Actionpoint(AP) match mask(AP_AMM), AP match value(AP_AMV) and AP control(AC). Note: some fields of actionpoint_t structure will be used in further support of watchpoints. Change-Id: I4efb24675f247cc19d9122501c9e63c3126fcab4 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5763 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-07-10 06:52:35 -05:00
}
Introduce ARCv2 tcl config files With this commit we add tcl files which describes ARCv2 architecture features and configure files for ARCv2 EMSK board. Changes since v1: -Moved from http://openocd.zylin.com/#/c/5332/4 into separate commit. Changes: 22.01.2020: -Removed "actionpoints" handling code in tcl/cpu/arc/v2.tcl because this capability is not supported yet. Changes: 17.03.2020: -Update Licence headers -Cleanup indents -Removed "reset halt" in boards .tcl -Updated adapter frequency commands Changes: 15.03.2020: -Removed "init" in the of boards .tcl Change-Id: I51bf620abe7b8e046e1dccc861a7d963965d3a42 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5350 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-11-27 23:34:01 -06:00
}