interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/NEWS

57 lines
1.9 KiB
Plaintext
Raw Normal View History

Version 0.4.0-dev Add "-dev" tag. Update minor version number. Archive old NEWS file, start a new one.
2009-11-04 21:44:36 -06:00
This file includes highlights of the changes made in the
Open the merge window for the 0.5.0 release cycle. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-21 15:27:37 -06:00
OpenOCD 0.5.0 source archive release. See the repository
Version 0.4.0-dev Add "-dev" tag. Update minor version number. Archive old NEWS file, start a new one.
2009-11-04 21:44:36 -06:00
history for details about what changed, including bugfixes
and other issues not mentioned here.
Add NEWS file for the 0.2.0 release. git-svn-id: svn://svn.berlios.de/openocd/trunk@2474 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06 06:26:21 -05:00
JTAG Layer:
Add support for Bus Pirate as a JTAG adapter. This includes a driver and matching config file. This support needs to be enabled through the initial "configure" (use "--enable-buspirate"). Signed-off-by: Michal Demin <michaldemin@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-08 06:45:14 -06:00
New driver for "Bus Pirate"
rename jtag_khz as adapter_khz Globally rename "jtag_khz" as "adapter_khz", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. (We may want to update it to include a nag message too.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 10:37:43 -05:00
Rename various commands so they're not JTAG-specific
jtag/tcl.c cleanup -- split out "adapter.c" Clean up the jtag/tcl.c file, which was one of the biggest and messiest ones in that directory. Do it by splitting out all the generic adapter commands to a separate "adapter.c" file (leaving the "tcl.c" file holding only JTAG utilities). Also rename the little-used "jtag interface" to "adapter_name", which should have been at least re-categorized earlier (it's not jtag-only). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-27 12:07:13 -05:00
There are migration procedures for most of these, but you should
rename jtag_khz as adapter_khz Globally rename "jtag_khz" as "adapter_khz", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. (We may want to update it to include a nag message too.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 10:37:43 -05:00
convert your scripts to the new names, since those procedures
will not be around forever.
jtag/tcl.c cleanup -- split out "adapter.c" Clean up the jtag/tcl.c file, which was one of the biggest and messiest ones in that directory. Do it by splitting out all the generic adapter commands to a separate "adapter.c" file (leaving the "tcl.c" file holding only JTAG utilities). Also rename the little-used "jtag interface" to "adapter_name", which should have been at least re-categorized earlier (it's not jtag-only). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-27 12:07:13 -05:00
jtag jinterface ... is now adapter_name
rename jtag_khz as adapter_khz Globally rename "jtag_khz" as "adapter_khz", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. (We may want to update it to include a nag message too.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 10:37:43 -05:00
jtag_khz ... is now adapter_khz
rename jtag_nsrst_delay as adapter_nsrst_delay Globally rename "jtag_nsrst_delay" as "adapter_nsrst_delay", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 10:41:30 -05:00
jtag_nsrst_delay ... is now adapter_nsrst_delay
rename jtag_nsrst_assert_width as adapter_nsrst_assert_width Globally rename "jtag_nsrst_assert_width" as "adapter_nsrst_assert_width", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 10:42:26 -05:00
jtag_nsrst_assert_width ... is now adapter_nsrst_assert_width
JTAG: support KT-LINK adapter Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-04 23:20:44 -06:00
NEWS: more info There were a few more changes worth mentioning, including support for more JTAG adapters, boundary scan improvements, another NAND driver, and the Win64 stuff. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-30 22:21:31 -05:00
Boundary Scan:
Coexist with quilt: rename PATCHES --> PATCHES.txt The issues is on Win32, which ignores case in filesystem and thus doesn't tolerate the quilt "patches" directory. Rename, and add "patches" to .gitignore so that developers can choose to use quilt for local patch management. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-08 19:20:47 -06:00
Add NEWS file for the 0.2.0 release. git-svn-id: svn://svn.berlios.de/openocd/trunk@2474 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06 06:26:21 -05:00
Target Layer:
SCRIPT: add add_script_search_dir cmd Add a add_script_search_dir cmd so that adding search dir's can be added to cfg scripts. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-17 04:57:44 -05:00
MIPS:
- "ejtag_srst" variant removed. The same functionality is
obtained by using "reset_config none".
- added PIC32MX software reset support, this means srst is not
required to be connected anymore.
ARM11: use now-generic memory utils Now the ARM11 cores can use the renamed arm_checksum_memory() and arm_blank_check_memory() routines ... do so. Sanity checked with "flash erase_check" of both NOR banks on an OMAP2420 ... the algorithm code dumped four lines of of "poll" status after each of almost 520 blocks (yes, *very* annoying) but gave plausible results after producing that spam. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-15 12:35:47 -06:00
Add NEWS file for the 0.2.0 release. git-svn-id: svn://svn.berlios.de/openocd/trunk@2474 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06 06:26:21 -05:00
Flash Layer:
new "stellaris recover" command Stellaris chips have a procedure for restoring the chip to what's effectively the "as-manufactured" state, with all the non-volatile memory erased. That includes all flash memory, plus things like the flash protection bits and various control words which can for example disable debugger access. clearly, this can be useful during development. Luminary/TI provides an MS-Windows utility to perform this procedure along with its Stellaris developer kits. Now OpenOCD users will no longer need to use that MS-Windows utility. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-27 02:31:35 -06:00
New "stellaris recover" command, implements the procedure
to recover locked devices (restoring non-volatile
state to the factory defaults, including erasing
the flash and its protection bits, and possibly
re-enabling hardware debugging).
SCRIPT: add add_script_search_dir cmd Add a add_script_search_dir cmd so that adding search dir's can be added to cfg scripts. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-17 04:57:44 -05:00
PIC32MX now uses algorithm for flash programming, this
has increased the performance by approx 96%.
update NEWS with recent developments Mention changes to flash bank command syntax, 'nand verify' command, command error handling and reporting, and help/usage command upgrades.
2009-11-20 09:06:32 -06:00
Archive released NEWS file: NEWS -> NEWS-0.2.0 Create new NEWS file from release script template. git-svn-id: svn://svn.berlios.de/openocd/trunk@2522 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-14 04:02:00 -05:00
Board, Target, and Interface Configuration Scripts:
LPC1768 updates, IAR board support Fix some issues with the generic LPC1768 config file: - Handle the post-reset clock config: 4 MHz internal RC, no PLL. This affects flash and JTAG clocking. - Remove JTAG adapter config; they don't all support trst_and_srst - Remove the rest of the bogus "reset-init" event handler. - Allow explicit CCLK configuration, instead of assuming 12 MHz; some boards will use 100 Mhz (or the post-reset 4 MHz). - Simplify: rely on defaults for endianness and IR-Capture value - Update some comments too Build on those fixes to make a trivial config for the IAR LPC1768 kickstart board (by Olimex) start working. Also, add doxygen to the lpc2000 flash driver, primarily to note a configuration problem with driver: it wrongly assumes the core clock rate never changes. Configs that are safe for updating flash after "reset halt" will thus often be unsafe later ... e.g. for LPC1768, after switching to use PLL0 at 100 MHz. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-02 17:00:14 -06:00
Support IAR LPC1768 kickstart board (by Olimex)
ARM11: use now-generic memory utils Now the ARM11 cores can use the renamed arm_checksum_memory() and arm_blank_check_memory() routines ... do so. Sanity checked with "flash erase_check" of both NOR banks on an OMAP2420 ... the algorithm code dumped four lines of of "poll" status after each of almost 520 blocks (yes, *very* annoying) but gave plausible results after producing that spam. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-15 12:35:47 -06:00
update NEWS with recent developments Mention changes to flash bank command syntax, 'nand verify' command, command error handling and reporting, and help/usage command upgrades.
2009-11-20 09:06:32 -06:00
Core Jim/TCL Scripting:
SCRIPT: add add_script_search_dir cmd Add a add_script_search_dir cmd so that adding search dir's can be added to cfg scripts. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-17 04:57:44 -05:00
New "add_script_search_dir" command, behaviour is the same
as the "-s" cmd line option.
update NEWS with recent developments Mention changes to flash bank command syntax, 'nand verify' command, command error handling and reporting, and help/usage command upgrades.
2009-11-20 09:06:32 -06:00
Add NEWS file for the 0.2.0 release. git-svn-id: svn://svn.berlios.de/openocd/trunk@2474 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06 06:26:21 -05:00
Documentation:
update NEWS with recent developments Mention changes to flash bank command syntax, 'nand verify' command, command error handling and reporting, and help/usage command upgrades.
2009-11-20 09:06:32 -06:00
Add NEWS file for the 0.2.0 release. git-svn-id: svn://svn.berlios.de/openocd/trunk@2474 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06 06:26:21 -05:00
Build and Release:
Archive released NEWS file: NEWS -> NEWS-0.2.0 Create new NEWS file from release script template. git-svn-id: svn://svn.berlios.de/openocd/trunk@2522 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-14 04:02:00 -05:00
For more details about what has changed since the last release,
NEWS refs repository history, not ChangeLog Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-04 17:54:33 -06:00
see the git repository history. With gitweb, you can browse that
in various levels of detail.
For older NEWS, see the NEWS files associated with each release
(i.e. NEWS-<version>).
Add NEWS file for the 0.2.0 release. git-svn-id: svn://svn.berlios.de/openocd/trunk@2474 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06 06:26:21 -05:00
For more information about contributing test reports, bug fixes, or new
features and device support, please read the new Developer Manual (or
Coexist with quilt: rename PATCHES --> PATCHES.txt The issues is on Win32, which ignores case in filesystem and thus doesn't tolerate the quilt "patches" directory. Rename, and add "patches" to .gitignore so that developers can choose to use quilt for local patch management. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-08 19:20:47 -06:00
the BUGS and PATCHES.txt files in the source archive).
Open the merge window for the 0.5.0 release cycle. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-21 15:27:37 -06:00