interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/altera_sockit.cfg

19 lines
489 B
INI
Raw Normal View History

Add tcl configurations for Altera Soc devices This commit adds two tcl configuration files, one for the Altera Cyclone V SoC series, and one for the SoCkit development board. The board configuration is able to halt and resume the cpu cores, and dump register contents etc. It has not been fully tested, however. Change-Id: Id3f18c3408975cf986a5f5aec410b5b13240c35e Signed-off-by: Brad Riensche <brad.riensche@gmail.com> Reviewed-on: http://openocd.zylin.com/1494 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-09 16:28:14 -05:00
#
# Cyclone V SocKit board
# http://www.altera.com/b/arrow-sockit.html
#
# Software support page:
# http://www.rocketboards.org/
# openocd does not currently support the on-board USB Blaster II.
# Install the JTAG header and use a USB Blaster instead.
tcl: replace command "interface" with "adapter driver" Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with command sed -i 's/^interface /adapter driver /' $(find tcl/ -type f) Change-Id: I2291dfb96e164beecbeb3366ce83f9df2ad6c197 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5283 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-08-23 08:49:58 -05:00
adapter driver usb_blaster
Add tcl configurations for Altera Soc devices This commit adds two tcl configuration files, one for the Altera Cyclone V SoC series, and one for the SoCkit development board. The board configuration is able to halt and resume the cpu cores, and dump register contents etc. It has not been fully tested, however. Change-Id: Id3f18c3408975cf986a5f5aec410b5b13240c35e Signed-off-by: Brad Riensche <brad.riensche@gmail.com> Reviewed-on: http://openocd.zylin.com/1494 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-09 16:28:14 -05:00
source [find target/altera_fpgasoc.cfg]
# If the USB Blaster II were supported, these settings would be needed
udev rules: add missing Altera USB Blaster devices All Altera USB Blaster devices require a dedicated line in the udev rules, but some USB VID/PID present in interface and board config file is missing in udev rules. Add the missing Altera USB Blaster devices in udev rules. While there, fix an incorrect pair VID/PID that are reported swapped inside a comment. Change-Id: I2d67e90b10db99ef2638405585859c1393456f65 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6102 Tested-by: jenkins
2021-03-07 16:49:30 -06:00
#usb_blaster_vid_pid 0x09fb 0x6810
Add tcl configurations for Altera Soc devices This commit adds two tcl configuration files, one for the Altera Cyclone V SoC series, and one for the SoCkit development board. The board configuration is able to halt and resume the cpu cores, and dump register contents etc. It has not been fully tested, however. Change-Id: Id3f18c3408975cf986a5f5aec410b5b13240c35e Signed-off-by: Brad Riensche <brad.riensche@gmail.com> Reviewed-on: http://openocd.zylin.com/1494 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-09 16:28:14 -05:00
#usb_blaster_device_desc "USB-Blaster II"
tcl: replace the deprecated commands with "adapter ..." Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-08-23 08:51:00 -05:00
adapter speed 100