interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
riscv-openocd/tcl/board/adsp-sc584-ezbrd.cfg

33 lines
1.2 KiB
INI
Raw Normal View History

tcl/board: add SPDX tag For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2022-06-12 16:48:05 -05:00
# SPDX-License-Identifier: GPL-2.0-or-later
tcl: Support for Analog Devices ADSP-SC58x / ADSP-SC584-EZBRD The original script was broken by changes to the Cortex-A code. The recent introduction of the mem_ap target provided a new mechanism to allow the script to be fixed. This also adds an example board script for the ADSP-SC584-EZBRD. Change-Id: I36bc1ac6b6c036539f4175f1e65223ba10a35355 Signed-off-by: Peter Lawrence <majbthrd@gmail.com> Reviewed-on: http://openocd.zylin.com/4855 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-01-16 18:00:34 -06:00
#
# Analog Devices ADSP-SC584-EZBRD evaluation board
#
# Evaluation boards by Analog Devices (and designs derived from them) use a
# non-standard 10-pin 0.05" ARM Cortex Debug Connector. In this bastardized
# implementation, pin 9 (GND or GNDDetect) has been usurped with JTAG /TRST.
#
# As a result, a standards-compliant debug pod will force /TRST active,
# putting the processor's debug interface into reset and preventing usage.
#
# A connector adapter must be employed on these boards to isolate or remap
# /TRST so that it is only asserted when intended.
# Analog expects users to use their proprietary ICE-1000 / ICE-2000 with all
# ADSP-SC58x designs, but this is an ARM target (and subject to the
# qualifications above) many ARM debug pods should be compatible.
#source [find interface/cmsis-dap.cfg]
source [find interface/jlink.cfg]
# Analog's silicon supports SWD and JTAG, but their proprietary ICE is limited
# to JTAG. (This is presumably why their connector pinout was modified.)
# SWD is chosen here, as it is more efficient and doesn't require /TRST.
transport select swd
# chosen speed is 'safe' choice, but your adapter may be capable of more
tcl: replace the deprecated commands with "adapter ..." Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2019-08-23 08:51:00 -05:00
adapter speed 400
tcl: Support for Analog Devices ADSP-SC58x / ADSP-SC584-EZBRD The original script was broken by changes to the Cortex-A code. The recent introduction of the mem_ap target provided a new mechanism to allow the script to be fixed. This also adds an example board script for the ADSP-SC584-EZBRD. Change-Id: I36bc1ac6b6c036539f4175f1e65223ba10a35355 Signed-off-by: Peter Lawrence <majbthrd@gmail.com> Reviewed-on: http://openocd.zylin.com/4855 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-01-16 18:00:34 -06:00
source [find target/adsp-sc58x.cfg]