This changes the forkID calculation to ignore time-based forks that occurred before the
genesis block. It's supposed to be done this way because the spec says:
> If a chain is configured to start with a non-Frontier ruleset already in its genesis, that is NOT considered a fork.
This PR removes the newly added txpool.Transaction wrapper type, and instead adds a way
of keeping the blob sidecar within types.Transaction. It's better this way because most
code in go-ethereum does not care about blob transactions, and probably never will. This
will start mattering especially on the client side of RPC, where all APIs are based on
types.Transaction. Users need to be able to use the same signing flows they already
have.
However, since blobs are only allowed in some places but not others, we will now need to
add checks to avoid creating invalid blocks. I'm still trying to figure out the best place
to do some of these. The way I have it currently is as follows:
- In block validation (import), txs are verified not to have a blob sidecar.
- In miner, we strip off the sidecar when committing the transaction into the block.
- In TxPool validation, txs must have a sidecar to be added into the blobpool.
- Note there is a special case here: when transactions are re-added because of a chain
reorg, we cannot use the transactions gathered from the old chain blocks as-is,
because they will be missing their blobs. This was previously handled by storing the
blobs into the 'blobpool limbo'. The code has now changed to store the full
transaction in the limbo instead, but it might be confusing for code readers why we're
not simply adding the types.Transaction we already have.
Code changes summary:
- txpool.Transaction removed and all uses replaced by types.Transaction again
- blobpool now stores types.Transaction instead of defining its own blobTx format for storage
- the blobpool limbo now stores types.Transaction instead of storing only the blobs
- checks to validate the presence/absence of the blob sidecar added in certain critical places
The Go authors updated golang/x/ext to change the function signature of the slices sort method.
It's an entire shitshow now because x/ext is not tagged, so everyone's codebase just
picked a new version that some other dep depends on, causing our code to fail building.
This PR updates the dep on our code too and does all the refactorings to follow upstream...
This change makes the StateDB track the state key value diff of a block transition.
We already tracked current account and storage values for the purpose of updating
the state snapshot. With this PR, we now also track the original (pre-transition) values
of accounts and storage slots.
The state availability is checked during the creation of a state reader.
- In hash-based database, if the specified root node does not exist on disk disk, then
the state reader won't be created and an error will be returned.
- In path-based database, if the specified state layer is not available, then the
state reader won't be created and an error will be returned.
This change also contains a stricter semantics regarding the `Commit` operation: once it has been performed, the trie is no longer usable, and certain operations will return an error.
This removes the feature where top nodes of the proof can be elided.
It was intended to be used by the LES server, to save bandwidth
when the client had already fetched parts of the state and only needed
some extra nodes to complete the proof. Alas, it never got implemented
in the client.
* all: move main transaction pool into a subpool
* go.mod: remove superfluous updates
* core/txpool: review fixes, handle txs rejected by all subpools
* core/txpool: typos
* core/txpool: abstraction prep work for secondary pools (blob pool)
* core/txpool: leave subpool concepts to a followup pr
* les: fix tests using hard coded errors
* core/txpool: use bitmaps instead of maps for tx type filtering
In this PR, all TryXXX(e.g. TryGet) APIs of trie are renamed to XXX(e.g. Get) with an error returned.
The original XXX(e.g. Get) APIs are renamed to MustXXX(e.g. MustGet) and does not return any error -- they print a log output. A future PR will change the behaviour to panic on errorrs.
This change renames StateTrie methods to remove the Try* prefix.
We added the Trie methods with prefix 'Try' a long time ago, working
around the problem that most existing methods of Trie did not return the
database error. This weird naming convention has persisted until now.
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
The EmptyRootHash and EmptyCodeHash are defined everywhere in the codebase, this PR replaces all of them with unified one defined in core/types package, and also defines constants for TxRoot, WithdrawalsRoot and UncleRoot
This PR relaxes the block body ingress handling a bit: if block body withdrawals are missing (but expected to be empty), the body withdrawals are set to 'empty list' before being passed to upper layers.
This fixes an issue where a block passed from EthereumJS to geth was deemed invalid.
This change ports some changes from the main PBSS PR:
- get rid of callback function in `trie.Database.Commit` which is not required anymore
- rework the `nodeResolver` in `trie.Iterator` to make it compatible with multiple state scheme
- some other shallow changes in tests and typo-fixes
This PR moves some trie-related db accessor methods to a different file, and also removes the schema type. Instead of the schema type, a string is used to distinguish between hashbased/pathbased db accessors.
This also moves some code from trie package to rawdb package.
This PR is intended to be a no-functionality-change prep PR for #25963 .
---------
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
This change implements withdrawals as specified in EIP-4895.
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: marioevz <marioevz@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR introduces a node scheme abstraction. The interface is only implemented by `hashScheme` at the moment, but will be extended by `pathScheme` very soon.
Apart from that, a few changes are also included which is worth mentioning:
- port the changes in the stacktrie, tracking the path prefix of nodes during commit
- use ethdb.Database for constructing trie.Database. This is not necessary right now, but it is required for path-based used to open reverse diff freezer
This PR makes it so that the snap server responds to trie heal requests when possible, even if the snapshot does not exist. The idea being that it might prolong the lifetime of a state root, so we don't have to pivot quite as often.
This changes the CI / release builds to use the latest Go version. It also
upgrades golangci-lint to a newer version compatible with Go 1.19.
In Go 1.19, godoc has gained official support for links and lists. The
syntax for code blocks in doc comments has changed and now requires a
leading tab character. gofmt adapts comments to the new syntax
automatically, so there are a lot of comment re-formatting changes in this
PR. We need to apply the new format in order to pass the CI lint stage with
Go 1.19.
With the linter upgrade, I have decided to disable 'gosec' - it produces
too many false-positive warnings. The 'deadcode' and 'varcheck' linters
have also been removed because golangci-lint warns about them being
unmaintained. 'unused' provides similar coverage and we already have it
enabled, so we don't lose much with this change.
* core: use TryGetAccount to read where TryUpdateAccount has been used to write
* Gary's review feedback
* implement Gary's suggestion
* fix bug + rename NewSecure into NewStateTrie
* trie: add backwards-compatibility aliases for SecureTrie
* Update database.go
* make the linter happy
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
The new protocol version removes support for GetNodeData.
See https://eips.ethereum.org/EIPS/eip-4938 for more information.
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This enables the following linters
- typecheck
- unused
- staticcheck
- bidichk
- durationcheck
- exportloopref
- gosec
WIth a few exceptions.
- We use a deprecated protobuf in trezor. I didn't want to mess with that, since I cannot meaningfully test any changes there.
- The deprecated TypeMux is used in a few places still, so the warning for it is silenced for now.
- Using string type in context.WithValue is apparently wrong, one should use a custom type, to prevent collisions between different places in the hierarchy of callers. That should be fixed at some point, but may require some attention.
- The warnings for using weak random generator are squashed, since we use a lot of random without need for cryptographic guarantees.
* eth/protocols/snap: don't include empty snapshot slot slice
This PR fixes the snapshot storage serving handler. In snap protocol
the response is capped by the response size. Server can cutdown the
response if the accumulated byte size exceeds the local hard limit.
It means we can meet a special scenario that there is no storage slot
included for a requested account, but we attach the proof for this
account by mistake.
So in the prover side, when it meets a empty storage response but with
a valid proof proves there are some more slots left in the trie, then
requestor will reject this response and disconnect with server.
In this PR, if there is no storage slot served for the requested account,
then no proof should be attached as well.
* eth/protocols/snap: loosen restrictions for flaky tests
* eth/catalyst: fix flaky test in catalyst
This change makes use of the new code generator rlp/rlpgen to improve the
performance of RLP encoding for Header and StateAccount. It also speeds up
encoding of ReceiptForStorage using the new rlp.EncoderBuffer API.
The change is much less transparent than I wanted it to be, because Header and
StateAccount now have an EncodeRLP method defined with pointer receiver. It
used to be possible to encode non-pointer values of these types, but the new
method prevents that and attempting to encode unadressable values (even if
part of another value) will return an error. The error can be surprising and may
pop up in places that previously didn't expect any errors.
To make things work, I also needed to update all code paths (mostly in unit tests)
that lead to encoding of non-pointer values, and pass a pointer instead.
Benchmark results:
name old time/op new time/op delta
EncodeRLP/legacy-header-8 328ns ± 0% 237ns ± 1% -27.63% (p=0.000 n=8+8)
EncodeRLP/london-header-8 353ns ± 0% 247ns ± 1% -30.06% (p=0.000 n=8+8)
EncodeRLP/receipt-for-storage-8 237ns ± 0% 123ns ± 0% -47.86% (p=0.000 n=8+7)
EncodeRLP/receipt-full-8 297ns ± 0% 301ns ± 1% +1.39% (p=0.000 n=8+8)
name old speed new speed delta
EncodeRLP/legacy-header-8 1.66GB/s ± 0% 2.29GB/s ± 1% +38.19% (p=0.000 n=8+8)
EncodeRLP/london-header-8 1.55GB/s ± 0% 2.22GB/s ± 1% +42.99% (p=0.000 n=8+8)
EncodeRLP/receipt-for-storage-8 38.0MB/s ± 0% 64.8MB/s ± 0% +70.48% (p=0.000 n=8+7)
EncodeRLP/receipt-full-8 910MB/s ± 0% 897MB/s ± 1% -1.37% (p=0.000 n=8+8)
name old alloc/op new alloc/op delta
EncodeRLP/legacy-header-8 0.00B 0.00B ~ (all equal)
EncodeRLP/london-header-8 0.00B 0.00B ~ (all equal)
EncodeRLP/receipt-for-storage-8 64.0B ± 0% 0.0B -100.00% (p=0.000 n=8+8)
EncodeRLP/receipt-full-8 320B ± 0% 320B ± 0% ~ (all equal)
This PR reduces the amount of work we do when answering header queries, e.g. when a peer
is syncing from us.
For some items, e.g block bodies, when we read the rlp-data from database, we plug it
directly into the response package. We didn't do that for headers, but instead read
headers-rlp, decode to types.Header, and re-encode to rlp. This PR changes that to keep it
in RLP-form as much as possible. When a node is syncing from us, it typically requests 192
contiguous headers. On master it has the following effect:
- For headers not in ancient: 2 db lookups. One for translating hash->number (even though
the request is by number), and another for reading by hash (this latter one is sometimes
cached).
- For headers in ancient: 1 file lookup/syscall for translating hash->number (even though
the request is by number), and another for reading the header itself. After this, it
also performes a hashing of the header, to ensure that the hash is what it expected. In
this PR, I instead move the logic for "give me a sequence of blocks" into the lower
layers, where the database can determine how and what to read from leveldb and/or
ancients.
There are basically four types of requests; three of them are improved this way. The
fourth, by hash going backwards, is more tricky to optimize. However, since we know that
the gap is 0, we can look up by the parentHash, and stlil shave off all the number->hash
lookups.
The gapped collection can be optimized similarly, as a follow-up, at least in three out of
four cases.
Co-authored-by: Felix Lange <fjl@twurst.com>
This doesn't fix all go-critic warnings, just the most serious ones.
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This removes some code:
- The clique engine calculated the snapshot twice when verifying headers/blocks.
- The method GetBlockHashesFromHash in Header/Block/Lightchain was only used by tests. It
is now removed from the API.
- The method GetTdByHash internally looked up the number before calling GetTd(hash, num).
In many cases, callers already had the number, and used this method just because it has a
shorter name. I have removed the method to make the API surface smaller.
* accounts/abi/bind: fix bounded contracts and sim backend for 1559
* accounts/abi/bind, ethclient: don't rely on chain config for gas prices
* all: enable London for all internal tests
* les: get receipt type info in les tests
* les: fix weird test
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/ethapi: add baseFee to RPCMarshalHeader
* internal/ethapi: add FeeCap, Tip and correct GasPrice to EIP-1559 RPCTransaction results
* core,eth,les,internal: add support for tip estimation in gas price oracle
* internal/ethapi,eth/gasprice: don't suggest tip larger than fee cap
* core/types,internal: use correct eip1559 terminology for json marshalling
* eth, internal/ethapi: fix rebase problems
* internal/ethapi: fix rpc name of basefee
* internal/ethapi: address review concerns
* core, eth, internal, les: simplify gasprice oracle (#25)
* core, eth, internal, les: simplify gasprice oracle
* eth/gasprice: fix typo
* internal/ethapi: minor tweak in tx args
* internal/ethapi: calculate basefee for pending block
* internal/ethapi: fix panic
* internal/ethapi, eth/tracers: simplify txargs ToMessage
* internal/ethapi: remove unused param
* core, eth, internal: fix regressions wrt effective gas price in the evm
* eth/gasprice: drop weird debug println
* internal/jsre/deps: hack in 1559 gas conversions into embedded web3
* internal/jsre/deps: hack basFee to decimal conversion
* internal/ethapi: init feecap and tipcap for legacy txs too
* eth, graphql, internal, les: fix gas price suggestion on all combos
* internal/jsre/deps: handle decimal tipcap and feecap
* eth, internal: minor review fixes
* graphql, internal: export max fee cap RPC endpoint
* internal/ethapi: fix crash in transaction_args
* internal/ethapi: minor refactor to make the code safer
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: gary rong <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This change extracts the peer QoS tracking logic from eth/downloader, moving
it into the new package p2p/msgrate. The job of msgrate.Tracker is determining
suitable timeout values and request sizes per peer.
The snap sync scheduler now uses msgrate.Tracker instead of the hard-coded 15s
timeout. This should make the sync work better on network links with high latency.
This removes auto-configuration of the snap.*.ethdisco.net DNS discovery tree.
Since measurements have shown that > 75% of nodes in all.*.ethdisco.net support
snap, we have decided to retire the dedicated index for snap and just use the eth
tree instead.
The dial iterators of eth and snap now use the same DNS tree in the default configuration,
so both iterators should use the same DNS discovery client instance. This ensures that
the record cache and rate limit are shared. Records will not be requested multiple times.
While testing the change, I noticed that duplicate DNS requests do happen even
when the client instance is shared. This is because the two iterators request the tree
root, link tree root, and first levels of the tree in lockstep. To avoid this problem, the
change also adds a singleflight.Group instance in the client. When one iterator
attempts to resolve an entry which is already being resolved, the singleflight object
waits for the existing resolve call to finish and returns the entry to both places.
lightclient
Felix Lange
Péter Szilágyi
rjl493456442
Guillaume Ballet
Delweng
Dan Laine
s7v7nislands
Marius van der Wijden
Martin Holst Swende
Jolly Zhao
vdwijden
Jens W
Zachinquarantine
Justin Traglia
沉风
Taeik Lim
Iskander (Alex) Sharipov
Ferran Borreguero