This pull request removes the destruct flag from the state snapshot to
simplify the code.
Previously, this flag indicated that an account was removed during a
state transition, making all associated storage slots inaccessible.
Because storage deletion can involve a large number of slots, the actual
deletion is deferred until the end of the process, where it is handled
in batches.
With the deprecation of self-destruct in the Cancun fork, storage
deletions are no longer expected. Historically, the largest storage
deletion event in Ethereum was around 15 megabytes—manageable in memory.
In this pull request, the single destruct flag is replaced by a set of
deletion markers for individual storage slots. Each deleted storage slot
will now appear in the Storage set with a nil value.
This change will simplify a lot logics, such as storage accessing,
storage flushing, storage iteration and so on.
This pull request refactors the EVM constructor by removing the
TxContext parameter.
The EVM object is frequently overused. Ideally, only a single EVM
instance should be created and reused throughout the entire state
transition of a block, with the transaction context switched as needed
by calling evm.SetTxContext.
Unfortunately, in some parts of the code, the EVM object is repeatedly
created, resulting in unnecessary complexity. This pull request is the
first step towards gradually improving and simplifying this setup.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
In many cases, there is a need to create somewhat nontrivial bytecode. A
recent example is the verkle statetests, where we want a `CREATE2`- op
to create a contract, which can then be invoked, and when invoked does a
selfdestruct-to-self.
It is overkill to go full solidity, but it is also a bit tricky do
assemble this by concatenating bytes. This PR takes an approach that
has been used in in goevmlab for several years.
Using this utility, the case can be expressed as:
```golang
// Some runtime code
runtime := program.New().Ops(vm.ADDRESS, vm.SELFDESTRUCT).Bytecode()
// A constructor returning the runtime code
initcode := program.New().ReturnData(runtime).Bytecode()
// A factory invoking the constructor
outer := program.New().Create2AndCall(initcode, nil).Bytecode()
```
We have a lot of places in the codebase where we concatenate bytes, cast
from `vm.OpCode` . By taking tihs approach instead, thos places can be made a
bit more maintainable/robust.
This adds an API method `DropTransactions` to legacy pool, blob pool and
txpool interface. This method removes all txs currently tracked in the
pools.
It modifies the simulated beacon to use the new method in `Rollback`
which removes previous hacky implementation that also erroneously reset
the gas tip to 1 gwei.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
The [kilic](https://github.com/kilic/bls12-381) bls12381 implementation
has been archived. It shouldn't be necessary to include it as a fuzzing
target any longer.
This also adds fuzzers for G1/G2 mul that use inputs that are guaranteed
to be valid. Previously, we just did random input fuzzing for these
precompiles.
This is one further step towards removing account management from
`geth`. This PR deprecates the flag `unlock`, and makes the flag moot:
unlock via geth is no longer possible.
This change invokes the OnCodeChange hook when selfdestruct operation is performed, and a contract is removed. This is an event which can be consumed by tracers.
This PR moves chain config related code (config file processing, fork
logic, network defaults) from `beacon/types` and `beacon/blsync` into
`beacon/params` while the command line flag logic of the chain config is
moved into `cmd/utils`, thereby removing the cli dependencies from
package `beacon` and its sub-packages.
When `evm statetest --bench` is specified, benchmark the execution
similarly to `evm run`.
Also adds the ability to filter tests by name, index and fork.
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Adds testcase for createAccessList when user requested gasPrice is less than baseFee, also makes the tests tabledriven
---------
Co-authored-by: Martin Holst Swende <martin@swende.se>
Here I'm adding a new helper function that extracts the revert reason of
a contract call. Unfortunately, this aspect of the API is underspecified.
See these spec issues for more detail:
- https://github.com/ethereum/execution-apis/issues/232
- https://github.com/ethereum/execution-apis/issues/463
- https://github.com/ethereum/execution-apis/issues/523
The function added here only works with Geth-like servers that return
error code `3`. We will not be able to support all possible servers.
However, if there is a specific server implementation that makes it
possible to extract the same info, we could add it in the same function
as well.
---------
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
`flatCallTracer` will now specify the type of a create in the action
via the `creationMethod` field.
---------
Signed-off-by: jsvisa <delweng@gmail.com>
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
This PR fixes some issues with benchmarks
- [x] Removes log output from a log-test
- [x] Avoids a `nil`-defer in `triedb/pathdb`
- [x] Fixes some crashes re tracers
- [x] Refactors a very resource-expensive benchmark for blobpol.
**NOTE**: this rewrite touches live production code (a little bit), as
it makes the validator-function used by the blobpool configurable.
- [x] Switch some benches over to use pebble over leveldb
- [x] reduce mem overhead in the setup-phase of some tests
- [x] Marks some tests with a long setup-phase to be skipped if `-short`
is specified (where long is on the order of tens of seconds). Ideally,
in my opinion, one should be able to run with `-benchtime 10ms -short`
and sanity-check all tests very quickly.
- [x] Drops some metrics-bechmark which times the speed of `copy`.
---------
Co-authored-by: Sina Mahmoodi <itz.s1na@gmail.com>
Tests that are crucial to for verifying the verkle testnet functions properly.
---------
Signed-off-by: Guillaume Ballet <3272758+gballet@users.noreply.github.com>
Co-authored-by: Ignacio Hagopian <jsign.uy@gmail.com>
Co-authored-by: Gary Rong <garyrong0905@gmail.com>
Co-authored-by: Martin HS <martin@swende.se>
This test depends on a 100ms timer, which fails quite often, messing up
our pipelines. Hook directly into the internal version of getPayload
which has the capacity to wait for the full payload before returning.
This might not be absolutely correct from a test perspective, but it
beats failing ci. The alternative would be to expose the full build hook
into the outside, but it might be a bit overkill for this scenario.
This PR is a first step towards removing account management from geth,
and contains a lot of the user-facing changes.
With this PR, the `personal` namespace disappears. **Note**: `personal`
namespace has been deprecated for quite some time (since
https://github.com/ethereum/go-ethereum/pull/26390 1 year and 8 months
ago), and users who have wanted to use it has been forced to used the
flag `--rpc.enabledeprecatedpersonal`. So I think it's fairly
non-controversial to drop it at this point.
Specifically, this means:
- Account/wallet listing
-`personal.getListAccounts`
-`personal.listAccounts`
-`personal.getListWallets`
-`personal.listWallets`
- Lock/unlock
-`personal.lockAccount`
-`personal.openWallet`
-`personal.unlockAccount`
- Sign ops
-`personal.sign`
-`personal.sendTransaction`
-`personal.signTransaction`
- Imports / inits
-`personal.deriveAccount`
-`personal.importRawKey`
-`personal.initializeWallet`
-`personal.newAccount`
-`personal.unpair`
- Other:
-`personal.ecRecover`
The underlying keystores and account managent code is still in place,
which means that `geth --dev` still works as expected, so that e.g. the
example below still works:
```
> eth.sendTransaction({data:"0x6060", value: 1, from:eth.accounts[0]})
```
Also, `ethkey` and `clef` are untouched.
With the removal of `personal`, as far as I know we have no more API
methods which contain credentials, and if we want to implement
logging-capabilities of RPC ingress payload, it would be possible after
this.
---------
Co-authored-by: Felix Lange <fjl@twurst.com>
Currently we have a custom TextMarshalerFlag. It's a nice idea, allowing
anything implementing text marshaller to be used as a flag. That said,
we only ever used it in one place because it's not that obvious how to
use and it needs some boilerplate on the type itself too, apart of the
heavy boilerplate got the custom flag.
All in all there's no *need* to drop this feature just now, but while
porting the cmds over to cli @v3, all other custom flags worker
perfectly, whereas this one started crashing deep inside the cli
package. The flag handling in v3 got rebuild on generics and there are a
number of new methods needed; and my guess is that maybe one of them
doesn't work like this flag currently is designed too.
We could definitely try and redesign this flag for cli v3... but all
that effort and boilerplate just to use it for 1 flag in 1 location,
seems not worth it. So for now I'm suggesting removing it and maybe
reconsider a similar feature in cli v3 with however it will work.
Martin Holst Swende
rjl493456442
j2gg0s
wangjingcun
Hyunsoo Shin (Lake)
Håvard Anda Estensen
jwasinger
bitcoin-lightning
Marius Kjærstad
witty
tianyeyouyou
Marius van der Wijden
Péter Szilágyi
zhiqiangxu
Karol Chojnowski
Felföldi Zsolt
Naveen
Madhur Shrimal
SangIlMo
Felix Lange
dependabot[bot]
Delweng
Guillaume Ballet
piersy