andlabs-ui/areaplan.md at 6ecf70bd3cc1e85658b3d961cd178e633a4bc571

51 KiB

Raw Blame History

type Area struct {		// implements Control
	// Paint receives requests to redraw from the window system.
	Paint		chan PaintRequest

	// Keyboard receives keyboard events.
	Key		chan KeyEvent			// not covered here

	// Mouse receives mouse events.
	Mouse	chan MouseEvent		// not covered here
}

// PaintRequest represents a request to redraw an Area.
// It is sent across Area.Paint.
type PaintRequest struct {
	// Rect is the clipping rectangle that needs redraw.
	Rect		image.Rect

	// Out is a channel on which you send the image to redraw.
	Out		chan<- *image.NRGBA
}

and an example of intended use:

func myAreaGoroutine(area *ui.Area, start <-chan bool) {
	var img *image.NRGBA

	// initialize img here
	<-start		// sent after calling Window.Open()
	area.SetSize(img.Rect.Dx(), img.Rect.Dy())	// sets the internal size; scrollbars and scrolling is handled automatically
	for {
		select {
		case req := <-area.Paint:
			req.Out <- img.SubImage(req.Rect).(*image.NRGBA)
		case e := <-area.Mouse:
			// draw on a mouse click, for instance
		}
	}
}

TODO is there a race on area.SetSize()?

TODO for all of the following: verify API call data types before moving code

Drawing and Scrolling

Windows

We create another custom window class that does WM_PAINT and handles input events thereof.

For this mockup, I'll extract the message handling into its own function and assume I can call Windows API functions and use their types and constants as normal. For WM_PAINT both wparam and lparam are unused.

func repaint(s *sysData) HRESULT {
	var xrect RECT
	var ps PAINTSTRUCT

	// TODO send TRUE if we want to erase the clip area
	if GetUpdateRect(s.hwnd, &xrect, FALSE) == 0 {
		// no update rect, so we're done
		return 0
	}
	hdc, err := BeginPaint(s.hwnd, &ps)
	if hdc == 0 {		// failure
		panic(fmt.Errorf("error beginning Area repaint: %v", err))
	}

	cliprect := image.Rect(int(xrect.Left), int(xrect.Top), int(xrect.Right), int(xrect.Bottom))
	imgret := make(chan *image.NRGBA)
	defer close(imgret)
	s.paint <- PaintRequest{
		Rect:		cliprect,
		Out:		imgret,
	}
	i := <-imgret

	// drawing code here; see below

	EndPaint(s.hwnd, &ps)
	return 0
}

We can use GDI+ (gdiplus.dll) and its flat API for drawing...

GpStatus WINGDIPAPI GdipCreateBitmapFromScan0(INT width, INT height, INT stride, PixelFormat format, BYTE* scan0, GpBitmap** bitmap);
GpStatus WINGDIPAPI GdipCreateFromHDC(HDC hdc, GpGraphics **graphics);
GpStatus WINGDIPAPI GdipDrawImageI(GpGraphics *graphics, GpImage *image, INT x, INT y);
GpStatus WINGDIPAPI GdipDeleteGraphics(GpGraphics *graphics);
GpStatus WINGDIPAPI GdipDisposeImage(GpImage *image);

(GpBitmap extends GpImage.) The only problem is the pixel format: the most appropriate one is PixelFormat32bppARGB, which is not premultiplied, but the components are in the wrong order... (specifically in BGRA order) (there is no RGBA pixel format in any bit width) (TODO GdipDisposeImage seems wrong since it bypasses ~Bitmap() and goes right for ~Image() but I don't see an explicit ~Bitmap()...)

Disregarding the RGBA issue, the draw code would be

	var bitmap, graphics uintptr

	status := GdipCreateBitmapFromScan0(
		i.Rect.Dx(),
		i.Rect.Dy(),
		i.Stride,
		PixelFormat32bppARGB,
		(*byte)(unsafe.Pointer(&i.Pix[0])),
		&bitmap)
	if status != 0 {		// failure
		panic(fmt.Errorf("error creating GDI+ bitmap to blit (GDI+ error code %d)", status))
	}
	status = GdipCreateFromHDC(hdc, &graphics)
	if status != 0 {		// failure
		panic(fmt.Errorf("error creating GDI+ graphics context to blit to (GDI+ error code %d)", status))
	}
	status = GdipDrawImageI(graphics, bitmap, cliprect.Min.X, cliprect.Min.Y)
	if status != 0 {		// failure
		panic(fmt.Errorf("error blitting GDI+ bitmap (GDI+ error code %d)", status))
	}
	status = GdipDeleteGraphics(graphics)
	if status != 0 {		// failure
		panic(fmt.Errorf("error freeing GDI+ graphics context to blit to (GDI+ error code %d)", status))
	}
	status = GdipDisposeImage(bitmap)
	if status != 0 {		// failure
		panic(fmt.Errorf("error freeing GDI+ bitmap to blit (GDI+ error code %d)", status))
	}

Upon further review, there really doesn't seem to be any way around it: we have to shuffle the image data around. We seem to be in good company: go.wde needs to do so as well. But you can't be too sure...

	realbits := make([]byte, 4 * i.Rect.Dx() * I.Rect.Dy())
	q := 0
	for y := i.Rect.Min.Y; y < i.Rect.Max.Y; y++ {
		k := i.Pix[y * i.Stride:]
		for x := i.Rect.Min.X; x < i.Rect.Max.X; x += 4 {
			realbits[q + 0] = byte(k[y + x + 2])	// B
			realbits[q + 1] = byte(k[y + x + 1])	// G
			realbits[q + 2] = byte(k[y + x + 0])	// R
			realbits[q + 3] = byte(k[y + x + 3])	// A
			q += 4
		}
	}

	var bitmap, graphics uintptr

	status := GdipCreateBitmapFromScan0(
		i.Rect.Dx(),
		i.Rect.Dy(),
		i.Rect.Dy() * 4,			// got rid of extra stride
		PixelFormat32bppARGB,
		&realbits[0],
		&bitmap)
	// rest of code

We must also initialize and shut down GDI+ in uitask:

var (
	gdiplustoken uintptr
)

	// init
	startupinfo := &GdiplusStartupInput{
		GdiplusVersion:	1,
	}
	status := GdiplusStartup(&gdiplustoken, startupinfo, nil)
	if status != 0 {		// failure
		return fmt.Errorf("error initializing GDI+ (GDI+ error code %d)", status)
	}

	// shutdown
	GdiplusShutdown(gdiplustoken)

For scrolling, the custom window class will come with scrollbars. We are reponsible for scrolling ourselves:

we handle WM_HSCROLL and WM_VSCROLL messages, extrapolating the scroll data
- we can use GetScrollInfo to get the current position, but the example code on MSDN adjusts it manually and then calls ScrollWindow then UpdateWindow (to accelerate redraw) and then SetScrollInfo (to update the scroll info)
line size is 1, page size is visible dimension
call SetScrollInfo on control resizes, passing in a SCROLLINFO which indicates the above, does not include SIF_DISABLENOSCROLL so scrollbars are auto-hidden, and does not change either thumb position (nPos and nTrackPos)
the clipping rectangle must take scrolling into account; GetScrollInfo and add the position to the sent-out cliprect (only; still need regular cliprect for drawing) with cliprect.Add()
we should probably cache the scroll position and window sizes so we wouldn't need to call those respective functions each WM_PAINT and WM_HSCROLL/WM_VSCROLL, respectively
- TODO will resizing a window with built-in scrollbars/adjusting the page size set the thumb and signal repaint properly?

TODO is there a function to turn a GpStatus into a string?

TODO note http://msdn.microsoft.com/en-us/library/windows/desktop/bb775501%28v=vs.85%29.aspx#win_class for information on handling some key presses, tab switch, etc. (need to do this for the ones below too)

TODO standard scrollbars cannot be controlled by the keyboard; either we must provide an option for doing that or allow scrolling ourselves (the myAreaGoroutine would read the keyboard events and scroll manually, in the same way)

GTK+

We can use GtkDrawingArea. We hook into the draw signal; it does something equivalent to

func draw_callback(widget *C.GtkWidget, cr *C.cairo_t, data C.gpointer) C.gboolean {
	var x, y, w, h C.double

	s := (*sysData)(unsafe.Pointer(data))
	// thanks to desrt in irc.gimp.net/#gtk+
	C.cairo_clip_extents(cr, &x, &y, &w, &h)
	cliprect := image.Rect(int(x), int(y), int(w), int(h))
	imgret := make(chan *image.NRGBA)
	defer close(imgret)
	s.paint <- PaintRequest{
		Rect:		cliprect,
		Out:		imgret,
	}
	i := <-imgret
	pixbuf := C.gdk_pixbuf_new_from_data(
		(*C.guchar)(unsafe.Pointer(&i.Pix[0])),
		C.GDK_COLORSPACE_RGB,
		C.TRUE,			// has alpha channel
		8,				// bits per sample
		C.int(i.Rect.Dx()),
		C.int(i.Rect.Dy()),
		C.int(i.Stride),
		nil, nil)			// do not free data
	C.gdk_cairo_set_source_pixbuf(cr,
		pixbuf,
		C.gdouble(cliprect.Min.X),
		C.gdouble(cliprect.Min.Y))
	C.g_object_unref((C.gpointer)(unsafe.Pointer(pixbuf)))		// free pixbuf
	return C.FALSE		// TODO what does this return value mean? docs don't say
}

Example 1 on this page indicates the pixels are in RGBA order, which is good.

On alpha premultiplication:

12:27	andlabs	Hi. Is the pixel data fed to gdk-pixbuf alpha premultiplied, not alpha premultiplied, or is that settable? I need to feed it data from a source that doesn't know about the underlying rendering system. Thanks.
12:29		*** KaL_out is now known as KaL
12:29	desrt	andlabs: pixbuf is non-premultiplied
12:30	mclasen	sad that this information is not obvious in the docs
12:30	andlabs	there is no information about premultiplied in any of the GTK+ documentation, period
12:30	desrt	andlabs: we have a utility function to copy it to a cairo surface that does the multiply for you...
12:30	andlabs	(in versions compatible with ubuntu 12.04, at least)
12:31	andlabs	good to know, thanks
12:31	desrt	andlabs: i think it's because gdkpixbuf existed before premultiplication was a wide practice
12:31	desrt	so at the time nobody would have asked the question
12:31	andlabs	huh

GtkDrawingArea is not natively scrollable, so we use gtk_scrolled_window_add_with_viewport() to add it to a GtkScrolledWindow with an implicit GtkViewport that handles scrolling for us. Otherwise, it's like what we did for Listbox.

TODO "Note that GDK automatically clears the exposed area to the background color before sending the expose event" decide what to do for the other platforms

Cocoa

For this one we must create a subclass of NSView that overrides the drawing and keyboard/mouse event messages.

The drawing message is -[NSView drawRect:], which just takes the NSRect as an argument. So we already need to use bleh_darwin.m to grab the actual NSRect and convert it into something with a predictable data type before passing it back to Go. If we do this:

//export our_drawRect
func our_drawRect(self C.id, rect C.struct_xrect) {

we can call our_drawRect() from this C wrapper:

extern void our_drawRect(id, struct xrect);

void _our_drawRect(id self, SEL sel, NSRect r)
{
	struct xrect t;

	t.x = (int64_t) s.origin.x;
	t.y = (int64_t) s.origin.y;
	t.width = (int64_t) s.size.width;
	t.height = (int64_t) s.size.height;
	our_drawRect(self, t);
}

This just leaves our_drawRect itself. For this mockup, I will use "Objective-Go":

var (
	// for later
	initWithBitmapDataPlanes = sel_getUid("initWithBitmapDataPlanes:pixelsWide:pixelsHigh:bitsPerSample:samplesPerPixel:hasAlpha:isPlanar:colorSpaceName:bitmapFormat:bytesPerRow:bitsPerPixel:")
)

//export our_drawRect
func our_drawRect(self C.id, rect C.struct_xrect) {
	s := getSysData(self)
	cliprect := image.Rect(int(rect.x), int(rect.y), int(rect.width), int(rect.height))
	imgret := make(chan *image.NRGBA)
	defer close(imgret)
	s.paint <- PaintRequest{
		Rect:		cliprect,
		Out:		imgret,
	}
	i := <-imgret
	// the NSBitmapImageRep constructor requires a list of pointers
	_bitmapData := [1]*uint8{&i.Pix[0]}
	bitmapData := (**C.uchar)(unsafe.Pointer(&bitmapData))
	bitmap := [[NSBitmapImageRep alloc]
		initWithBitmapDataPlanes:bitmapData
		pixelsWide:i.Rect.Dx()
		pixelsHigh:i.Rect.Dy()
		bitsPerSample:8
		samplesPerPixel:4
		hasAlpha:YES
		isPlanar:NO
		colorSpaceName:NSCalibratedRGBColorSpace		// TODO NSDeviceRGBColorSpace?
		bitmapFormat:NSAlphaNonpremultipliedBitmapFormat		// this is where the flag for placing alpha first would go if alpha came first; the default is alpha last, which is how we're doing things (otherwise the docs say "Color planes are arranged in the standard order—for example, red before green before blue for RGB color.")
		bytesPerRow:i.Stride
		bitsPerPixel:32]
	[bitmap drawAtPoint:NSMakePoint(cliprect.Min.X, cliprect.Min.Y)]
	[bitmap release]
}

Due to the size of the NSBitmapImageRep constructor, I might just have another C function that performs the NSBitmapImageRep constructor using the image.NRGBA fields.

Finally, we need to override -[NSView isFlipped] since we want to keep (0,0) at the top-left:

//export our_isFlipped
func our_isFlipped(self C.id, sel C.SEL) C.BOOL {
	return C.BOOL(C.YES)
}

For scrolling, we simply wrap our view in a NSScrollView just as we did with Listbox; Cocoa handles all the details for us.

TODO erase clip rect?

Mouse Events

TODO scroll wheel

Windows

Back to our custom window prodcedure again. We receive:

WM_LBUTTONDBLCLK
WM_LBUTTONDOWN
WM_LBUTTONUP
WM_MBUTTONDBLCLK
WM_MBUTTONDOWN
WM_MBUTTONUP
WM_RBUTTONDBLCLK
WM_RBUTTONDOWN
WM_RBUTTONUP
WM_XBUTTONDBLCLK
WM_XBUTTONDOWN
WM_XBUTTONUP

which specify the left, middle, right, and up to two additional mouse buttons.

Each of these returns the coordinates in the LPARAM and the modifier flags in the WPARAM:

MK_CONTROL
MK_LBUTTON
MK_MBUTTON
MK_RBUTTON
MK_SHIFT
MK_XBUTTON1
MK_XBUTTON2

where the button modifier flags allow handling simultaneous clicks. The XBUTTON messages also use WPARAM to encode which button was pressed.

In order to register double-clicks, we have to specify the CS_DBLCLKS style when calling RegisterClass. A mouse click event will always be sent before a double-click event.

That just leaves mouse moves. All mouse moves are handled with WM_MOUSEMOVE, which returns the same WPARAM and LPARAM format as above (so we use the WPARAM to see which mouse buttons were held during a move).

All of these messages expect us to return 0, except the XBUTTON messages, which expect us to return TRUE.

MSDN says to use macros to get the position and XBUTTON information:

/* for all messages */
xPos = GET_X_LPARAM(lParam);
yPos = GET_Y_LPARAM(lParam);

/* for XBUTTON messages */
fwKeys = GET_KEYSTATE_WPARAM (wParam);
fwButton = GET_XBUTTON_WPARAM (wParam);

We will need to reimplement these macros ourselves.

All messages are supported on at least Windows 2000, so we're good using them all.

There does not seem to be an equivalent to the mouse entered signal provided by GTK+ and Cocoa. There is an equivalent to mouse left (WM_MOUSELEAVE), but it requires tracking support, which has to be set up in special ways.

Finally, the Alt key has to be retrieved a differnet way. This says we can use GetKeyState(VK_MENU).

GTK+

"button-press-event" for mouse button presses; needs GDK_BUTTON_PRESS_MASK and returns GdkEventButton
"button-release-event" for mouse button releases; needs GDK_BUTTON_RELEASE_MASK and returns GdkEventButton
"enter-notify-event" for when the mouse enters the widget; needs GDK_ENTER_NOTIFY_MASK and returns GdkEventCrossing
"leave-notify-event" for when the mouse leaves the widget; needs GDK_LEAVE_NOTIFY_MASK and returns GdkEventCrossing
"motion-notify-event" for when the mouse moves while inside the widget; needs GDK_POINTER_MOTION_MASK and returns GdkEventMotion

The following events may also be of use:

GDK_BUTTON_MOTION_MASK
	receive pointer motion events while any button is pressed

GDK_BUTTON1_MOTION_MASK
	receive pointer motion events while 1 button is pressed

GDK_BUTTON2_MOTION_MASK
	receive pointer motion events while 2 button is pressed

GDK_BUTTON3_MOTION_MASK
	receive pointer motion events while 3 button is pressed

GdkEventButton tells us:

event type: click, double-click, triple-click, release
- a click event is always sent before a double-click and triple-click event
  - double-click: click, release, click, double-click, release
  - triple-click: C, R, C, DC, R, C, TC, R
    - this goes against other OSs which don't send both a click and double-click on the double-click
x and y positions of event
modifier keys and other mouse buttons held during event: see https://developer.gnome.org/gdk3/stable/gdk3-Windows.html#GdkModifierType
- does not appear to have a way to differentiate left and right modifier keys
- see note below about Alt/Meta
button ID of event, with order 1 - left, 2 - middle, 3 - right

GdkEventCrossing tells us

whether this was an enter or a leave
x and y positions of event
"crossing mode" and "notification type" [not sure if I'll need these - https://developer.gnome.org/gdk3/stable/gdk3-Event-Structures.html#GdkEventCrossing]
modifier/mose button held flags (see above)

GdkEventMotion tells us

the type of the event (I assume this is always going to be GDK_MOTION_NOTIFY)
x and y positions of the event
modifier keys/mouse buttons held (as above)

GDK by default doesn't map all the modifier keys away from their device-speicifc values into portable values; we have to tell it to do so:

	C.gdk_keymap_add_virtual_modifiers(C.gdk_keymap_get_default(), &e.state)

(thanks to Daniel_S and daniels (two different people) in irc.gimp.net/#gtk+) (note: the GDK 3.4 documentation has a rather complex description of what gdk_keymap_add_virtual_modifiers() does; the latest version has a much better description)

Cocoa

Our NSView subclass will override the following:

mouseDown:
mouseDragged:
mouseUp:
mouseMoved:
mouseEntered:
mouseExited:
rightMouseDragged:
rightMouseUp:
otherMouseDown:
otherMouseDragged:
otherMouseUp:

The mouse... selectors are for the left mouse button. Each of these selectors is of the form

- (void)selectorName:(NSEvent *)e

where NSEvent is a concrete type, not an abstract class, that contains all the information we need.

...almost. NSEvent doesn't record mouse position directly, but rather relative to the view's parent window. The NSView Programming Guide says we can do

	nspoint := [self convertPoint:[e locationInWindow] fromView:nil]

to get the point we want. This should also obey isFlipped:, as that affects "the coordinate system of the receiver".

For the button number, there's -[e buttonNumber]. The exact number is described below. The reference also says "This method is intended for use with the NSOtherMouseDown, NSOtherMouseUp, and NSOtherMouseDragged events, but will return values for NSLeftMouse... and NSRightMouse... events also.", so since we build our class at runtime, we can just assign the same implementation function to each type of event (the sel argument will differ, but since we can just get the button number directly we don't have to worry).

The click count is specified in -[e clickCount], so we can distinguish between single-click and double-click easily. Note "Returns 0 for a mouse-up event if a time threshold has passed since the corresponding mouse-down event. This is because if this time threshold passes before the mouse button is released, it is no longer considered a mouse click, but a mouse-down event followed by a mouse-up event.". The Event Programing Guide says "Find out how many mouse clicks occurred in quick succession (clickCount); multiple mouse clicks are conceptually treated as a single mouse-down event within a narrow time threshold (although they arrive in a series of mouseDown: messages). As with modifier keys, a double- or triple-click can change the significance of a mouse event for an application. (See Listing 4-3 for an example.)" which indicates that a click event is sent before a double-click.

-[e modifierFlags] gives us the modifier flags. The flag reference is https://developer.apple.com/library/mac/documentation/Cocoa/Reference/ApplicationKit/Classes/NSEvent_Class/Reference/Reference.html#//apple_ref/doc/uid/20000016-SW14 - no info on left/right keys seems to be provided.

The first held mouse button could be handled by the drag events. The rest can be grabbed with +[NSEvent pressedMouseButtons] (thanks to Psy| in irc.freenode.net/#macdev for confirming)

Also according to Psy|, the bit order of pressedMouseButtons corresponds to the buttonNumber, so 0 is the left button, 1 is the right button, 2 is the middle button, and so on.

TODO do we need to override acceptsFirstMouse: to return YES so a click event is sent when changing the current program to this one?

Consensus

// MouseEvent contains all the information for a mous event sent by Area.Mouse.
// Mouse button IDs start at 1, with 1 being the left mouse button, 2 being the middle mouse button, and 3 being the right mouse button.
// (TODO "If additional buttons are supported, they will be returned with 4 being the first additional button (XBUTTON1 on Windows), 5 being the second (XBUTTON2 on Windows), and so on."?) (TODO get the user-facing name for XBUTTON1/2; find out if there's a way to query available button count)
type MouseEvent struct {
	// Pos is the position of the mouse relative to the top-left of the area.
	Pos			image.Point

	// If the event was generated by a mouse button being pressed, Down contains the ID of that button.
	// Otherwise, Down contains 0.
	Down		uint

	// If the event was generated by a mouse button being released, Up contains the ID of that button.
	// Otherwise, Up contains 0.
	Up			uint

	// If Down is nonzero, Count indicates the number of clicks: 1 for single-click, 2 for double-click.
	// If Count == 2, AT LEAST one event with Count == 1 will have been sent prior.
	// (This is a platform-specific issue: some platforms send one, some send two.)
	Count		uint

	// Modifiers is a bit mask indicating the modifier keys being held during the event.
	Modifiers		Modifiers

	// Held is a slice of button IDs that indicate which mouse buttons are being held during the event.
	// (TODO "There is no guarantee that Held is sorted."?)
	// (TODO will this include or exclude Down and Up?)
	Held			[]uint
}

// HeldBits returns Held as a bit mask.
// Bit 0 maps to button 1, bit 1 maps to button 2, etc.
func (e MousEvent) HeldBits() (h uintptr) {
	for _, x := range e.Held {
		h |= uintptr(1) << (x - 1)
	}
	return h
}

// Modifiers indicates modifier keys being held during a mouse event.
// There is no way to differentiate between left and right modifier keys.
type Modifiers uintptr
const (
	Ctrl Modifiers = 1 << iota		// the canonical Ctrl keys ([TODO] on Mac OS X, Control on others)
	Alt						// the canonical Alt keys ([TODO] on Mac OS X, Meta on Unix systems, Alt on others)
	Shift						// the Shift keys
)

Keyboard Events

You thought mouse events were vaguely compromise-y? Get ready... this is going to hurt. Bad.

Windows

Note: all messages here except WM_UNICHAR work on Windows 2000 and newer and require us to return 0 on handled. All messages (including WM_UNICHAR take the same parameter format.

The good: Windows keyboard message parameters are in a consistent, predictable format
The bad: everything else is not

Windows distinguishes between typical user input and "system keys"; system keys constitute three conditions:

Alt+(any key)
F10 (in some cases? TODO)
any key when there is no active window on screen System keys are special: if we don't handle them explicitly, we have to send them up to the DefWindowProc(). If we don't, things like Alt+Tab (!) won't be handled.

The TranslateMessage() call that appears in the message loop takes key down events, and if possible, converts them into Unicode character requests, handling IME properly. The key down events are not removed; new character events are inserted instead. There does not seem to be a good way to tell if one (or more! different parts of the docs say different things about how many character events come in per key down event TODO) has been inserted except with PeekMessage(), as TranslateMessage() always returns nonzero if a key down event is passed in, regardless of whether or not it was converted.

At the end of the day, the messages:

Regular	System
Key down	`WM_KEYDOWN`	`WM_SYSKEYDOWN`
Key up	`WM_KEYUP`	`WM_SYSKEYUP`
Character	`WM_CHAR`	`WM_SYSCHAR`
Dead key (character; we can ignore these)	`WM_DEADCHAR`	`WM_SYSDEADCHAR`

The WPARAM is the key code or UTF-16 character value. List of virtual key codes

The low word of the LPARAM is the repeat count. Multiple key down events will be sent, but we can use this to hold a count for convenience.

There's a lot of information in the high word of the LPARAM, but none of that is really important (and is useless for the character messages because of multi-character codes; it'll just match the last key down event). GLFW does use bit 24, the "extended key" bit, to differentiate between left and right keys (which is documented0, however there are some catches that we'll get to in a bit. For reference, though, the docs say

For enhanced 101- and 102-key keyboards, extended keys are the right ALT and the right CTRL keys on the main section of the keyboard; the INS, DEL, HOME, END, PAGE UP, PAGE DOWN and arrow keys in the clusters to the left of the numeric keypad; and the divide (/) and ENTER keys in the numeric keypad. Some other keyboards may support the extended-key bit in the lParam parameter.

I'm not entirely sure if this is the case, but GLFW seems to think Windows sends the base VK_xxx codes on keys that have both left and right equivalents, not the dedicated VK_Lxxx/VK_Rxxx codes. (Compatibility?) For most cases, the extended key bit mentioned above is sufficient to differentiate. There are two exceptions

Shift requires checking the hardware scancode (which, fortunately, Windows provides a way to find out from the virtual key code at runtime)
left Control: Windows apparently does not send a single key code on the "AltGr" key found on some keyboards, but rather both a left Control and a right Alt at the same time; fortunately we can check

Key release also has some snags that the GLFW sources point out:

The Shift key differentiation in Windows is broken: only one key up is sent, even if two Shift keys were released
Print Screen never sends a key down event!

Finally, Windows XP adds WM_UNICHAR, another key down event. According to the GLFW sources, Windows itself doesn't use this, but some IME drivers do. WPARAM (which is 32-bit now) stores the UTF-32 representation of a requested character, and LPARAM works as usual.

If WPARAM is the special constant UNICODE_NOCHAR, we return TRUE if we handle this event, and FALSE otherwise (DefWindowProc() returns FALSE). This is how drivers will tell if we support WM_UNICHAR at all.
Otherwise, we handle the character and return FALSE.

I do not know if WM_UNICHAR follows the same rules as WM_CHAR. TODO

TODO

do WM_CHAR/WM_SYSCHAR/WM_UNICHAR get sent on repeat?

GTK+

Note: GLFW doesn't really help here since we're using GDK for event handling and GLFW uses X11 directly. (I don't want to call out to X11 functions because of Wayland support; hell I don't know if GDK even provides the X11 key code!)

Before our GtkDrawingArea can take keyboard input, we need to turn its can-focus property on.

There are two events here: key-press-event and key-release-event. These take the same shared event function prototype as the mouse events above, with the GdkEvent actual type being GdkEventKey. This type tells us:

the modifier flags, just like with mouse events (even mouse buttons!)
the GDK virtual key code, which aren't explicitly listed in the documentation; the docs say to check <gdk/gdkkeysyms.h> instead.

Repeats are not documented; it appears that we just get sent multiple key-press-events in a row, with no way to tell if a key was repeated.

Character conversion is iffy. There doesn't really seem to be a way to handle character input properly...

Originally the GdkEventKey had fields that gave you that information, but this is now deprecated because of GTK+ input methods.
There's gdk_keyval_to_unicode(), but you can only handle one key at a time this way.
The only way to properly handle IME with GTK+ is to use GTK+ input methods via GtkIMContext, however there does not seem to be a way to get available contexts, only make new ones or pull the context from an existing GtkEntry/GtkTextView. (You can get a list of available context names, but that's as much as I could find, and even then this can be NULL.) TODO

Cocoa

Windows: either virtual key codes or character codes
GTK+: virtual key codes only
Cocoa: take a wild guess -_-

Our NSView subclass has three selectors to override:

- (void)keyDown:(NSEvent *e)			// key down
- (void)keyUp:(NSEvent *e)			// key up
- (void)flagsChanged:(NSEvent *e)		// modifier key state changed

Now, as with GTK+, I lie: there is a way to get a raw key code: [e keyCode]. Unfortunately, unlike with Windows and GTK+, this key code table is not device-independent and not keymap-independent: they are keyboard layout-specific, and do not appear to have been updated since the pre-Cocoa days. Indeed, neither Carbon nor Cocoa provide a definite list in their documentation, and the Xcode 5.0 version of Carbon's HIToolbox/Events.h header (/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/Headers/Events.h) even says

 *    keyboard. Those constants with "ANSI" in the name are labeled
 *    according to the key position on an ANSI-standard US keyboard.
 *    For example, kVK_ANSI_A indicates the virtual keycode for the key
 *    with the letter 'A' in the US keyboard layout. Other keyboard
 *    layouts may have the 'A' key label on a different physical key;
 *    in this case, pressing 'A' will generate a different virtual
 *    keycode.

The only thing we can guarantee is that the Cocoa and Carbon codes are the same (as the documentation does guarantee this). (If you ever wondered why GLFW talks about US English keyboards in its virtual keycode docs... this is why. Yes, GLFW interprets the raw key codes.)

So. NSEvent provides two methods for getting character data:

[e characters], which just returns a string with characters if not dead
[e charactersIgnoringModifiers] which bypasses Mac OS X's Option-key IME:
- let's say we press Option-E to dead-key a tilde
- [e characters] returns an empty NSString
- [e charactersIgnoringModifiers] returns @"E"

Thankfully there IS a way to get keys that aren't printable characters! ...Mac OS X steals the private use area block of the Unicode BMP and reserves it for its own virtual key codes; the first character of a one-character return from the characters methods will have a Unicode code point value equal to these. (There's also these non-graphic characters constants.)

(Technically you're supposed to send incoming key events to [self interpretKeyEvents:], which will generate a bunch of text-related method calls to make things easier, but we don't have to. Technically you're also supposed to use key equivalents, but that doesn't apply here...)

For modifier keys pressed by themselves, neither keyDown: nor keyUp: appears to be sent; we need to handle flagsChanged: (if I'm reading this right, anyway). Whatever the case, [e modifierFlags] will always be valid.

There's also [e isARepeat], which tells us whether a key was repeated; it does not say how many times. (TODO does this mean keyDown: is sent multiple times?)

TODO

Is there a way to differentiate Return and Enter? There doesn't seem to be a way to differentiate other left/right keys...
Does charactersIgnoringModifiers always work, or only if characters would otherwise indicate a dead key?

General TODOs

What happens if I hold down a key, then switch programs with the mouse and release the key? If I decide to intercept modifiers and hand them out like with mouse events, this will be an issue. (Otherwise, I could just poll them each time, like with mouse events; on Windows and Cocoa this will work (GLFW seems to do this on Windows anyway) but I'm not sure about GTK+.)
How is Shift handled in Windows character events?
Figure out which keys we can provide and which we can't...

Consensus??

type KeyEvent struct {
	// TODO some key representation
	// maybe
	ApproximateKey	int
		// maps to a definite key on Windows and GTK+
		// on Mac OS X, charactersIgnoringModifiers is used instead
		// this means we ignore IME completely, which isn't optimal, but.
		// if this is 0, a Modifier was pressed by itself
		// there is no way to differentiate left and right keys

	Modifiers			Modifiers

	Handled			chan<- bool
		// must return on this channel due to Windows system keys
}
// also note: add Super to Modifiers

Er wait oops

I forgot I wanted to make a tracker, whose input should in theory be layout independent; if we do the above we can't do this... we would need to use the key codes and hope key codes are keymap-dependent on both Windows and GTK+...

yeah

and guess what? they're keymap-independent on Windows and and likely so on GTK+ (thanks to tristan and LRN in irc.gimp.net/#gtk+ and exDM69 in irc.efnet.net/#winprog). Guess I'll need to write a quick test...
A on keyboard; US English QWERTY - keyval:0x61
A on keyboard; Georgian AZERTY Tskapo (A = ქ) - keyval:0x10010e5
so.

So this leaves character-based input as the only real option. The only two questions that remain are:

on Windows is there a reliable way to tell if a WM_CHAR DOES come up for the next code? WM_UNICHAR?
related: will both a WM_CHAR and a WM_UNCIHAR ever come up for the same keystroke?
how DO you load an existing GtkIMContext?
related: will Cocoa's charactersIgnoringModifiers always ignore modifiers?

Actually the real question is: is it possible to just get ONE domain of keyboard input on all platforms? GDK has constants for every possible language... so someone not using a Latin-based keyboard will wind up having their keystorkes rejected by the GdkDrawingArea...

Keyboard input MUST be well defined, and it must be well defined NOW. As the author of the GUI library, I MUST guarantee that someone typing a character on the same physical machine on different operating systems each with the same keyboard layout gets the exact same response (with no unwanted side effects), and by extension that the programmer sees the same thing. But things are just different enough to screw this up.

Approach	Windows	GTK+	Mac OS X
Virtual key code mapping	Adjusted by layout	Adjusted by layout	NOT adjusted by layout
Virtual key code range	Limited to physical keys on conventional keyboards; outside drivers do IME	NOT limited thus; virtual keycodes exist for languages	Limited to physical keys on conventional keyboards; OS provides IME facilities
Character translation at all	Provided by OS, but not sure about some behavioral details (TODO)	multiple; see the GTK+ section above; each problematic	Provided by OS; escape hatches available
Single-keystroke character translation	TODO	Constants exist for whatever keyboard layout you can imagine	TODO
Multi-keystroke character translation	`WM_DEADCHAR`/`WM_UNICHAR`	(see GTK+ s ectiona bove for issues)	Provided by OS; escape hatches avialable
Character translation ignoring input language (so the programmer can know that the A key was pressed regardless of language)	TODO	TODO	maybe `charactersIgnoringModifiers`? TODO

OK new consensus

Windows: use virtual key codes
OS X: use charactersIgnoringModifiers

(on the Area comment)
// Do not use an Area if you intend to read text.
// Due to platform differences regarding text input,
// keyboard events have beem compromised in
// such a way that attempting to read Unicode data
// in platform-native ways is painful.
// [Use TextArea instead, providing a TextAreaHandler.]
(corollary: this means multi-line edits will need a different name; corollary 2: this means I will have to start providing font resource acquisition, something I didn't want to do (I wanted to relegate that to freetype-go or similar, assuming that was even capable of doing so))

// A KeyEvent represents a keypress in an Area.
// 
// KeyEvent has been designed to be predictable.
// As the different operating systems supported by package ui
// expose wildly different APIs and rules for reading keystrokes,
// this means that KeyEvent has certain rules and restrictions
// that you must mind. This makes KeyEvent unsuitable
// for reading text (as Area's comment will say).
// As another consequence, no KeyEvent will be generated if
// package ui cannot portably report a given key. Supported
// keys are described in the comments for the Rune field and
// the ExtKey and Modifiers types. Package ui will act as if
// false was sent on Handled, so these ignored keypresses are
// sent back to the operating system for handling.
type KeyArea struct {
	// Rune contains a lowercase rune specifying the name
	// of the key pressed that triggered the event.
	// Ideally, this would generally correspond to
	// the raw character pressed (so there would be two
	// events 'k', 'a' instead of 'か', if Japanese characters are
	// input that way on a given machine). This will hold true
	// on systems where IME returns are separate from
	// keypress codes. On other systems, an attempt has
	// been made to map backwards based on information
	// that can be provided in the most portable (if the
	// system provides multiple of its own backends) way.
	// See [TODO] for a list of Rune values that are guaranteed
	// to be available. There is no way to differentiate between
	// multiple differnet Keys with the same name (for instance,
	// there is no way to differentiate between '1' on the typewriter
	// section of a standard 101-key keyboard and '1' on the numeric
	// keypad section). Furthermore, note that Rune's value does not
	// [necessarily? TODO] indicate a physical position on the keyboard
	// (for instance, 'a' is returned when pressing A on both QWERTY
	// and AZERTY keyboards, not when pressing the key that would be
	// A on QWERTY keyboards on all layouts).
	// If this field is zero, see ExtKey.
	// [TODO: how do we handle numlock and capslock?]
	Rune			rune

	// If Rune is zero, ExtKey contains a predeclared identifier
	// naming an extended key. See ExtKey for details.
	// If both Rune and ExtKey are zero, a Modifier by itself
	// was pressed. Rune and ExtKey will not both be nonzero.
	ExtKey		ExtKey

	Modifiers		Modifiers

	// If Up is true, the key was released; if not, the key was pressed.
	// There is no guarantee that all pressed keys shall have
	// corresponding release events (for instance, if the user switches
	// programs while holding the key down, then releases the key).
	// Keys that have been held down are reported as multiple
	// key press events.
	Up			bool

	// When you are finished processing the incoming event,
	// send whether or not you did something in response
	// to the given keystroke over Handled. If you send false,
	// you indicate that you did not handle the keypress, and
	// that the system should handle it instead. (Some systems
	// will stop processing the keyboard event at all if you return
	// true unconditionally, which may result in unwanted behavior
	// like global task-switching keystrokes not being processed.)
	// Only one value may be sent on Handled. Do not close Handled;
	// the package will do it for you.
	Handled		chan<- bool
}

// ExtKey represents keys that do not have a Rune representation.
// There is no way to differentiate between left and right ExtKeys.
type ExtKey uintptr
const (
	keyname1 ExtKey = iota
	keyname2
	keyname3
)
(notes: this will have to be produced based on what's available on each platform (Mac OS X might be the biggest filter here); also as a personal favor-the-user decision Print Screen shall not be supported)

If I ever intend on providing alternate text-based widgets, I will need to use GtkTextArea and NSTextArea to make things work the most fluidly, so this will require another type. Woo...

Also this answers the what if a key has been held down and switches away from the program question: Windows does not send a key up.

This just leaves the GTK+ geometry mapping: there is a way to do it if X11 is the only supported backend, but Wayland exists... [12:29] yes, you can assume that they are the same (irc.gimp.net/#gtk+) ok; that works too I guess let's go!

And finally... COMMON KEYS

I meant Windows might be the biggest filter because it has a concrete list of virtual key codes but meh

Windows	GDK	[Cocoa if known]
VK_BACK (0x08) - BACKSPACE key	GDK_KEY_BackSpace	either NSBackspaceCharacter or NSDeleteCharacter (TODO)
VK_TAB (0x09) - TAB key	GDK_KEY_Tab	NSTabCharacter; TODO do we also need to handle NSBackTabCharacter (Shift+Tab)?
VK_RETURN (0x0D) - ENTER key (note: also for numeric keypad)	[TODO either GDK_KEY_Linefeed or GDK_KEY_Return] and GDK_KEY_KP_Enter	either NSNewlineCharacter or NSCarriageReturnCharacter (TODO) (TODO also NSEnterCharacter?)
VK_SHIFT (0x10)/VK_LSHIFT (0xA0) - Left SHIFT key/VK_RSHIFT (0xA1) - Right SHIFT key - SHIFT key	[modifier]	[modifier]
VK_CONTROL (0x11)/VK_LCONTROL (0xA2) - Left CONTROL key/VK_RCONTROL (0xA3) - Right CONTROL key - CTRL key	[modifier]	[modifier]
VK_MENU (0x12)/VK_LMENU (0xA4) - Left MENU key/VK_RMENU (0xA5) - Right MENU key - ALT key	[modifier]	[modifier]
VK_PAUSE (0x13) - PAUSE key	GDK_KEY_Pause	NSPauseFunctionKey and NSBreakFunctionKey
VK_CAPITAL (0x14) - CAPS LOCK key	TODO either GDK_KEY_Caps_Lock or GDK_KEY_Shift_Lock	[modifier NSAlphaShiftKeyMask]
VK_ESCAPE (0x1B) - ESC key	GDK_KEY_Escape
VK_SPACE (0x20) - SPACEBAR	GDK_KEY_space
VK_PRIOR (0x21) - PAGE UP key	GDK_KEY_Page_Up	NSPageUpFunctionKey
VK_NEXT (0x22) - PAGE DOWN key	GDK_KEY_Page_Down	NSPageDownFunctionKey
VK_END (0x23) - END key	GDK_KEY_End	NSEndFunctionKey
VK_HOME (0x24) - HOME key	GDK_KEY_Home	NSHomeFunctionKey
VK_LEFT (0x25) - LEFT ARROW key	GDK_KEY_Left	NSLeftArrowFunctionKey
VK_UP (0x26) - UP ARROW key	GDK_KEY_Up	NSUpArrowFunctionKey
VK_RIGHT (0x27) - RIGHT ARROW key	GDK_KEY_Right	NSRightArrowFunctionKey
VK_DOWN (0x28) - DOWN ARROW key	GDK_KEY_Down	NSDownArrowFunctionKey
VK_INSERT (0x2D) - INS key	GDK_KEY_Insert	NSInsertFunctionKey (TODO also intercept the key that replaced it on newer Mac keyboards?)
VK_DELETE (0x2E) - DEL key	GDK_KEY_Delete (TODO really this one?)	either NSDeleteFunctionKey or NSDeleteCharacter (TODO)
0x30 - 0 key	GDK_KEY_0 and GDK_KEY_parenright (TODO how will we handle Rune for shifted symbols?)
0x31 - 1 key	GDK_KEY_1 and GDK_KEY_exclam
0x32 - 2 key	GDK_KEY_2 and GDK_KEY_at
0x33 - 3 key	GDK_KEY_3 and GDK_KEY_numbersign
0x34 - 4 key	GDK_KEY_4 and GDK_KEY_dollar (TODO how will this Rune be done on non-American setups?)
0x35 - 5 key	GDK_KEY_5 and GDK_KEY_percent
0x36 - 6 key	GDK_KEY_6 and GDK_KEY_asciicircum (TODO really this one?)
0x37 - 7 key	GDK_KEY_7 and GDK_KEY_ampersand
0x38 - 8 key	GDK_KEY_8 and GDK_KEY_asterisk
0x39 - 9 key	GDK_KEY_9 and GDK_KEY_parenleft
0x41 - A key	GDK_KEY_A and GDK_KEY_a
0x42 - B key	...
0x43 - C key	...
0x44 - D key	...
0x45 - E key	...
0x46 - F key	...
0x47 - G key	...
0x48 - H key	...
0x49 - I key	...
0x4A - J key	...
0x4B - K key	...
0x4C - L key	...
0x4D - M key	...
0x4E - N key	...
0x4F - O key	...
0x50 - P key	...
0x51 - Q key	...
0x52 - R key	...
0x53 - S key	...
0x54 - T key	...
0x55 - U key	...
0x56 - V key	...
0x57 - W key	...
0x58 - X key	...
0x59 - Y key	...
0x5A - Z key	...
VK_LWIN (0x5B) - Left Windows key (Natural keyboard)	[modifier]	[modifier]
VK_RWIN (0x5C) - Right Windows key (Natural keyboard)	[modifier]	[modifier]
VK_APPS (0x5D) - Applications key (Natural keyboard) (TODO which key is this? the right click shortcut key?)	TODO	TODO if this is the right click key, is it NSMenuFunctionKey?
VK_NUMPAD0 (0x60) - Numeric keypad 0 key	GDK_KEY_KP_0 (TODO really this?)
VK_NUMPAD1 (0x61) - Numeric keypad 1 key	...
VK_NUMPAD2 (0x62) - Numeric keypad 2 key	...
VK_NUMPAD3 (0x63) - Numeric keypad 3 key	...
VK_NUMPAD4 (0x64) - Numeric keypad 4 key	...
VK_NUMPAD5 (0x65) - Numeric keypad 5 key	...
VK_NUMPAD6 (0x66) - Numeric keypad 6 key	...
VK_NUMPAD7 (0x67) - Numeric keypad 7 key	...
VK_NUMPAD8 (0x68) - Numeric keypad 8 key	...
VK_NUMPAD9 (0x69) - Numeric keypad 9 key	...
VK_MULTIPLY (0x6A) - Multiply key	GDK_KEY_KP_Multiply (TODO really this one?)
VK_ADD (0x6B) - Add key	GDK_KEY_KP_Add (TODO really this one?)
VK_SUBTRACT (0x6D) - Subtract key	GDK_KEY_KP_Subtract (TODO really this one?)
VK_DECIMAL (0x6E) - Decimal key (. on numeric keypad)	GDK_KEY_KP_Decimal
VK_DIVIDE (0x6F) - Divide key	GDK_KEY_KP_Divide (TODO really this one?)
VK_F1 (0x70) - F1 key	GDK_KEY_F1	NSF1FunctionKey
VK_F2 (0x71) - F2 key	...	...
VK_F3 (0x72) - F3 key	...	...
VK_F4 (0x73) - F4 key	...	...
VK_F5 (0x74) - F5 key	...	...
VK_F6 (0x75) - F6 key	...	...
VK_F7 (0x76) - F7 key	...	...
VK_F8 (0x77) - F8 key	...	...
VK_F9 (0x78) - F9 key	...	...
VK_F10 (0x79) - F10 key	...	...
VK_F11 (0x7A) - F11 key	...	...
VK_F12 (0x7B) - F12 key	...	...
VK_NUMLOCK (0x90) - NUM LOCK key	GDK_KEY_Num_Lock	NSClearLineFunctionKey (according to docs)
VK_SCROLL (0x91) - SCROLL LOCK key	GDK_KEY_Scroll_Lock	NSScrollLockFunctionKey
VK_OEM_1 (0xBA) - Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the ';:' key (TODO see if the varying will hurt us somehow)	GDK_KEY_semicolon and GDK_KEY_colon
VK_OEM_PLUS (0xBB) - For any country/region, the '+' key	GDK_KEY_plus and GDK_KEY_equal
VK_OEM_COMMA (0xBC) - For any country/region, the ',' key	GDK_KEY_comma and GDK_KEY_less
VK_OEM_MINUS (0xBD) - For any country/region, the '-' key	GDK_KEY_minus and GDK_KEY_underscore
VK_OEM_PERIOD (0xBE) - For any country/region, the '.' key	GDK_KEY_period and GDK_KEY_greater
VK_OEM_2 (0xBF) - Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the '/?' key	GDK_KEY_slash and GDK_KEY_question
VK_OEM_3 (0xC0) - Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the '`~' key	GDK_KEY_quoteleft (TODO really?) and GDK_KEY_asciitilde
VK_OEM_4 (0xDB) - Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the '[{' key	GDK_KEY_bracketleft and GDK_KEY_braceleft
VK_OEM_5 (0xDC) - Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the '\|' key	GDK_KEY_backslash and GDK_KEY_bar (TODO really _bar?)
VK_OEM_6 (0xDD) - Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the ']}' key	GDK_KEY_bracketright and GDK_KEY_braceright
VK_OEM_7 (0xDE) - Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the 'single-quote/double-quote' key	GDK_KEY_apostrophe and GDK_KEY_apostrophe (TODO really this one?)

Windows keys that will not be handled:

VK_LBUTTON (0x01) - Left mouse button
VK_RBUTTON (0x02) - Right mouse button
VK_CANCEL (0x03) - Control-break processing
	TODO - is this generated on Control-C?
	TODO if we handle Pause/Break, this will need to come back
VK_MBUTTON (0x04) - Middle mouse button (three-button mouse)
VK_XBUTTON1 (0x05) - X1 mouse button
VK_XBUTTON2 (0x06) - X2 mouse button
VK_CLEAR (0x0C) - CLEAR key (TODO what key is this) | GDK_KEY_Clear
	I have no idea what key this is...
VK_KANA/VK_HANGUEL/VK_HANGUL (0x15) - IME Kana mode/IME Hanguel mode (maintained for compatibility; use VK_HANGUL)/IME Hangul mode
VK_JUNJA (0x17) - IME Junja mode
VK_FINAL (0x18) - IME final mode
VK_HANJA/VK_KANJI (0x19) - IME Hanja mode/IME Kanji mode
VK_CONVERT (0x1C) - IME convert
VK_NONCONVERT (0x1D) - IME nonconvert
VK_ACCEPT (0x1E) - IME accept
VK_MODECHANGE (0x1F) - IME mode change request
VK_SELECT (0x29) - SELECT key (TODO what key is this?) | TODO
VK_PRINT (0x2A) - PRINT key (TODO what key is this?) | TODO
VK_EXECUTE (0x2B) - EXECUTE key (TODO what key is this?) | TODO
VK_SNAPSHOT (0x2C) - PRINT SCREEN key
VK_HELP (0x2F) - HELP key (TODO what key is this?) | TODO
VK_SLEEP (0x5F) - Computer Sleep key (TODO which key is this?) | TODO
VK_SEPARATOR (0x6C) - Separator key (Shift+Decimal key on some foreign layouts; inserts local thousands separator) | TODO
VK_F13 (0x7C) - F13 key
VK_F14 (0x7D) - F14 key
VK_F15 (0x7E) - F15 key
VK_F16 (0x7F) - F16 key
VK_F17 (0x80) - F17 key
VK_F18 (0x81) - F18 key
VK_F19 (0x82) - F19 key
VK_F20 (0x83) - F20 key
VK_F21 (0x84) - F21 key
VK_F22 (0x85) - F22 key
VK_F23 (0x86) - F23 key
VK_F24 (0x87) - F24 key
0x92 - OEM specific
0x93 - OEM specific
0x94 - OEM specific
0x95 - OEM specific
0x96 - OEM specific
VK_BROWSER_BACK (0xA6) - Browser Back key
VK_BROWSER_FORWARD (0xA7) - Browser Forward key
VK_BROWSER_REFRESH (0xA8) - Browser Refresh key
VK_BROWSER_STOP (0xA9) - Browser Stop key
VK_BROWSER_SEARCH (0xAA) - Browser Search key
VK_BROWSER_FAVORITES (0xAB) - Browser Favorites key
VK_BROWSER_HOME (0xAC) - Browser Start and Home key
VK_VOLUME_MUTE (0xAD) - Volume Mute key
VK_VOLUME_DOWN (0xAE) - Volume Down key
VK_VOLUME_UP (0xAF) - Volume Up key
VK_MEDIA_NEXT_TRACK (0xB0) - Next Track key
VK_MEDIA_PREV_TRACK (0xB1) - Previous Track key
VK_MEDIA_STOP (0xB2) - Stop Media key
VK_MEDIA_PLAY_PAUSE (0xB3) - Play/Pause Media key
VK_LAUNCH_MAIL (0xB4) - Start Mail key
VK_LAUNCH_MEDIA_SELECT (0xB5) - Select Media key
VK_LAUNCH_APP1 (0xB6) - Start Application 1 key
VK_LAUNCH_APP2 (0xB7) - Start Application 2 key
VK_OEM_8 (0xDF) - Used for miscellaneous characters; it can vary by keyboard.
0xE1 - OEM specific
VK_OEM_102 (0xE2) - Either the angle bracket key or the backslash key on the RT 102-key keyboard
	TODO actually SHOULD we handle this one?
0xE3 - OEM specific
0xE4 - OEM specific
VK_PROCESSKEY (0xE5) - IME PROCESS key
0xE6 - OEM specific
VK_PACKET (0xE7) - Used to pass Unicode characters as if they were keystrokes. The VK_PACKET key is the low word of a 32-bit Virtual Key value used for non-keyboard input methods. For more information, see Remark in KEYBDINPUT, SendInput, WM_KEYDOWN, and WM_KEYUP
0xE9 - OEM specific
0xEA - OEM specific
0xEB - OEM specific
0xEC - OEM specific
0xED - OEM specific
0xEE - OEM specific
0xEF - OEM specific
0xF0 - OEM specific
0xF1 - OEM specific
0xF2 - OEM specific
0xF3 - OEM specific
0xF4 - OEM specific
0xF5 - OEM specific
VK_ATTN (0xF6) - Attn key
VK_CRSEL (0xF7) - CrSel key
VK_EXSEL (0xF8) - ExSel key
VK_EREOF (0xF9) - Erase EOF key
VK_PLAY (0xFA) - Play key
VK_ZOOM (0xFB) - Zoom key
VK_NONAME (0xFC) - Reserved
VK_PA1 (0xFD) - PA1 key
VK_OEM_CLEAR (0xFE) - Clear key

BONUS OS X NOTE (which means we're right in ignoring numpad differences)

NSNumericPadKeyMask Set if any key in the numeric keypad is pressed. The numeric keypad is generally on the right side of the keyboard. This is also set if any of the arrow keys are pressed (NSUpArrowFunctionKey, NSDownArrowFunctionKey, NSLeftArrowFunctionKey, and NSRightArrowFunctionKey).

51 KiB Raw Blame History

Drawing and Scrolling

Windows

GTK+

Cocoa

Mouse Events

Windows

GTK+

Cocoa

Consensus

Keyboard Events

Windows

GTK+

Cocoa

General TODOs

Consensus??

Er wait oops

OK new consensus

And finally... COMMON KEYS

51 KiB

Raw Blame History