interesting
/
andlabs-ui
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
andlabs-ui/futureplans.md

15 KiB
Raw Blame History

general list:

  • Window.SizeToFit() or WIndow.OptimalSize() (use: Window.SetOptimalSize())) for sizing a window to the control's interest
    • with the current code, will be a bit of a kludge, because preferredSize() assumes it's running on the main thread without locks
  • Control.Show()/Control.Hide()
  • Groupbox
  • character-limited entry fields (not for passwords), numeric entry fields, multiline entry fields
    • possible rename of LineEdit?
      • especially for password fields - NewPasswordEntry()?
  • padding and spacing in Stack
  • allow Combobox to have initial settings
  • Combobox and Listbox insertions and deletions should allow bulk (...string/...int)
  • Combobox/Listbox.DeleteAll
  • Combobox/Listbox.Select (with Listbox.Select allowing bulk)
    • Checkbox.Check or Checkbox.SetChecked
  • Listbox.SelectAll
  • Listbox/Combobox.Index(n)
    • Index(n) is the name used by reflect.Value; use a different one?
  • figure out where to auto-place windows in Cocoa (also window coordinates are still not flipped properly so (0,0) on screen is the bottom-left)
    • also provide a method to center windows; Cocoa provides one for us but
  • make Combobox and Listbox satisfy sort.Interface?
  • should a noneditable Combobox be allowed to return to unselected mode by the user?
  • provide a way for MouseEvent/KeyEvent to signal that the keypress caused the Area to gain/lose focus
    • provide an event for leaving focus so a focus rectangle can be drawn
  • when adding menus:
    • provide automated About, Preferneces, and Quit that place these in the correct location
      • Quit should pulse AppQuit

problem points:

  • because the main event loop is not called if initialization fails, it is presently impossible for MsgBoxError() to work if UI initialization fails; this basically means we cannot allow initializiation to fail on Mac OS X if we want to be able to report UI init failures to the user with one (which would be desirable, maybe (would violate Windows HIG?))
  • make sure GTK+ documentation version point differences (x in 4.3.x) don't matter
    • I found a GTK+ version number meaning page somewhere; have to find it again (TODO)

twists of fate:

  • listboxes spanning the vertical height of the window don't always align with the bottom border of the edit control attached to the bottom of the window...
    • this specifically only happens when the window has an odd height; I don't think this can be fixed unless we explicitly ignore the extra pixel everywhere
  • need a way to get ideal size for all controls on Windows, not just push buttons (Microsoft...)

style changes:

  • make specific wording in documentation consistent (make/create, etc.)
    • document minor details like wha thappens on specific events so that they are guaranteed to work the same on all platforms (are there any left?)
      • what happens when the user clicks and drags on a listbox
        • I think this is a platform behavior...
    • should field descriptions in method comments include the receiver name? (for instance e.Held vs. Held) - see what Go's own documentation does
    • need to figure out exactly how to indicate that a struct{}{} is sent on an event channel (I use about six or so different wordings so far...)
  • make passing of parameters and type conversions of parameters to uitask on Windows consistent: explicit _WPARAM(xxx)/_LPARAM(xxx)/uintptr(xxx), for example
    • do this for type signatures in exported functions: (err error) or just error?
    • do this for the names of GTK+ helper functions (gtkXXX or gXXX)
    • areaView -> goArea (or change the class name to be like the delegate name?) in area_darwin.go?

far off:

  • localization
  • strip unused constants from the Windows files
  • combine more Windows files; rename some?
  • tab stops
  • rename Stack to Box?
  • maybe change multiple selection lists to checkbox lists?
  • go over the old new thing's scrollbar series to make sure I'm doing everything right with scrollbars in Windows Areas

specifics:

WINDOWS

  • DateTime Picker
  • ListView for Tables
  • either Property Sheets or Tabs for Tabs
  • either Rebar or Toolbar for Toolbars
  • Status Bar
  • Tooltip (should be a property of each control)
  • Trackbar for Sliders
    • cannot automatically snap to custom step; need to do it manually
  • Tree View
  • Up-Down Control for Spinners
  • maybe:
    • swap ComboBox for ComboBoxEx (probably only if requested enough)
    • IP Address control (iff GTK+ and Cocoa have it; maybe not necessary if we allow arbitrary target addresses?)
    • ListView for its Icon View?
    • something similar to Task Dialog might be useful to have as a convenience template later
  • TODO
  • notes to self:

GTK+

  • GtkCalendar for date selection (TODO doesn't handle times)
  • GtkNotebook for Tabs
  • GtkScale for Sliders
    • cannot automatically snap to INTEGERS (let alone to custom steps); need to do it manually
    • natural size is 0x0 for some reason
  • GtkSpinButton for Spinners
  • GtkStatusBar
  • GtkToolbar
  • maybe:
    • GtkFontButton would be nice but unless ComboBoxEx provides it Windows doesn't
      • same for GtkColorButton
    • GtkIconView
    • GtkSeparator (I think Windows makes this a mode of Static controls?)
  • notes to self:

COCOA

  • NSDatePicker for date/time selection
  • NSOutlineView for tree views
  • NSSlider for Sliders
  • NSStatusBar
  • NSStepper for Spinners
    • TODO does this require me to manually pair it with a single-line text entry field?
  • NSTabView for Tabs
  • NSTableView for Tables
  • NSToolbar
  • maybe:
    • NSBrowser seems nice...???
    • NSCollectionView for Icon View?
    • NSColorWell is the color button
    • NSOpenGLView for OpenGL; need to see how much OpenGL-specific stuff I need to expose
    • NSRuleEditor/NSPredicateEditor look nice too but
  • notes to self:
    • groupbox is NSBox
    • don't look at NSForm; though it arranges in the ideal form layout, it only allows single-line text entry fields as controls
  • TODO:
    • what does NSPathControl look like?

Slider Capabilities

Capability Windows GTK+ Cocoa
Data Type int float float
Can Simulate ints? yes TODO TODO
Mouse Step Snap 1, fixed something; likely 0.1 but not sure yes (setAllowsTickMarkValuesOnly:); caveat: must specify an exact number of ticks (see below)
Keyboard Step Snap configurable configurable TODO (same as mouse?)
Current Value Display tooltip during drag label, always visible TODO
Tooltips? TODO TODO TODO
Ticks configurable display, configurable interval TODO configurable display; configurable COUNT (not interval!)
Can Catch Mouse Events to Snap? I think this is how to do it TODO TODO
Preferred Size given in UI guidelines natural: 0x0; minimum: TODO TODO

Spinner Capabilities

Capability Windows GTK+ Cocoa
Data Type int float flaot
Can Simulate ints? yes yes TODO
Mouse Step Snap 1, fixed configurable configurable
Keyboard Step Snap 1, fixed configurable (uses same value as mouse) TODO (same as mouse?)
Can Catch Events To Snap? TODO no need TODO
Preferred Size TODO TODO TODO

Dialog box hijack

Open/Save Dialogs

Windows GTK+ Cocoa
Directories no (separate facility provided by the shell) open and save open only
Network vs. local only (URI vs. filename) Network button enabled by default; can be switched off (TODO how are network filenames returned?) yes (default local only; if local only, changing to, say, smb://127.0.0.1/ will pop up an error box; if nonlocal allowed, filename can be null) xxx
Multiple selection yes yes open only
Hidden files user-specified; can be switched on in code (but is a no-op?) hidden by default; can be switched on in code (but is a no-op?) and also by the user xxx
Overwrite confirmation available; must be explicitly enabled available; must be explicitly enabled xxx
New Folder button xxx optional (I think enabled by default? should do it explicitly to be safe, anyway) optional
Preview widget xxx yes; optional, custom xxx
Extra custom widget xxx yes; optional yes; optional
File filters Specified by "patterns" (consisting of filename characters and * but not space; I assume the only safe ones are *.ext and .); multiple patterns separated by semicolons; can have custom labels Specified by MIME type (handles subtypes; has wildcards) or pattern ("shell-style glob", so I assume over whole basename) or by custom function; can have multiple of the above; can have custom labels; also has a shortcut to add all gdk-pixbuf-supported formats Specified by "UTI"s or by individual filename extensions (format not documented but appears to be just the extension without embellishments); cannot have labels; 1:1 filter:extension mapping.
File filter list format "Label\0Filter-list\0Label\0Filter-list\0...Label\0FIlter-list\0\0"; filter for all files is canonically "All Files\0*.*\0\0" in the docs (specifically this due to handling of shortcut links); also provides a way for users to write in their own filters Add or remove individual GtkFileFIlter objects; can select one specified in the list to show by default; default behavior is all files; if selected one when none has been specified, filter selection disabled; filter for all files specified in docs under gtk_file_filter_new() (except doesn't set a name) NSArray of filter strings, or nil for All Files. There is no provision to have an "all files" option: you either specify a set of filters or you don't. (See filename extension auto-append below.). All filters are applied at once; there is no way to select. We might need to introduce an accessory panel (extra widget) to fake the filtering rules of other platforms...
Default file name settable settable settable (as the filename label)
Initial directory complex rules that have changed over time; we can pass an absolute filename (the previous filename or a default filename) and have its path used (if we specify just a path it will either be used as the filename or the program will crash); or we can give it a directory; or Windows will remember for us for some time, or... pass previous filename or URI to show; overrides default file name; intended only for saving files (so I don't know if it's possible to remember current directory for opening??????); effect of passing containing directory undocumented(???? in my tests the given folder itself is selected) has some rules; there is a way to specify a custom one; seems to have the undocumented effect that it selects the file if a file is named
Confirmation and cancel buttons xxx GTK_STOCK_OPEN, GTK_STOCK_SAVE, GTK_STOCK_SAVE_AS / GTK_STOCK_CANCEL cancel button predefined; confirmation button can be changed (setPrompt:) but TODO the docs imply prompt is actually a global property?
Returned filename rules xxxx memory provided by GTK+ itself (so no need to worry about size limits); can return a single filename or URI or a GSList of filenames or URIs xxx
Window title optional; defaults to either Open or Save As required(?) optional for save (defaults to Save); unknown (TODO) for Open
Prompt to create new files available; must be explicitly enabled; seems to only apply to Open File dialogs (TODO) xxx xxx
Adds file to a Recent Documents list available; must be explicitly disabled xxx xxx
Allows nonexistent files to be created in Open dialogs yes; can be switched off xxx xxx
"Open as read-only"/"Save as read-only" checkbox provided; default; can be switched off xxx xxx
Navigating changes the current working directory of the program yes; can be switched off for Save dialogs only (????) xxx xxx
Link following For .lnk files, enabled by default iff a filter is specified; the All Files filter above is listed as being necessary to follow links; can be shut off with a flag in all cases xxx For Finder aliases, setResolvesAliases:
Help button Available; old-style dialog boxes need a parent window (Explorer-style ones don't; they just need a hook function) xxx xxx
Extension auto-appending Optional; three-character maximum; doesn't seem to be available on a per-filter basis xxx NOT OPTIONAL. The only way to avoid this is to not specify any filters. You can't even circumvent this with a delegate. If the user specifies another extension, they are asked to choose one if setAllowsOtherFileTypes: is set. (TODO could we use nameFieldStringValue to circumvent?)
Other labels xxx xxx field before filename entry can be changed; also can provide an additional optional message
Multiple selection allows empty selection xxx xxx xxx

TODO

  • Windows: OFN_NOTESTFILECREATE might be necessary
  • Windows: OFN_NOVALIDATE - see what happens without a hook
  • Windows: OFN_SHAREAWARE - this is a weird one but it's network related
  • Windows: templates seem to be how to provide extra parameters, but their usage isn't documented on the OPENFILENAME struct help page; check the rest of MSDN
  • Mac OS X: turn on both setExtensionHidden: and setCanSelectHiddenExtension: to show the extnesion in the dialog
  • Mac OS X: turn on setTreatsFilePackagesAsDirectories: since file packages (bundles) are an OS X-specific concept