Detecting non-clock signal edges with RisingEdge and FallingEdge is not
very robust, and is recommended against. Track edges manually.
Fixes: f6f3f02 ("Add phy_core")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
This module integrates the PCS with the descrambler, implements the PMA
(which is just the link monitor), and implements loopback and coltest
functions. This is more of the PCS/PMA, but the descrambler is
technically part of the PMD, so it's the "core" instead.
We deviate from the standard in one important way: the link doesn't come
up until the descambler is locked. I think this makes sense, since if
the descrambler isn't locked, then the incoming data will be gibberish.
I suspect this isn't part of the standard because the descrambler
doesn't have a locked output in X3.263, so IEEE would have had to
specify it.
Loopback is actually implemented in the PMD, but it modifies the
behavior in several places. It disables collisions (unless
coltest is enabled). Additionally, we need to force the link up (to
avoid the lengthy stabilization timer), but ensure it is down for at
least once cycle (to ensure the descrambler desynchronizes).
On the test side, we just go through the "happy path," as many of the
edge conditions are tested for in the submodule tests. Several of those
tests are modified so that their helper functions can be reused in this
test. In particular, the rx path is now async so that we can feed it
rx_data.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Sean Anderson