ethernet/rtl/phy_internal.v

137 lines
2.9 KiB
Coq
Raw Normal View History

// SPDX-License-Identifier: AGPL-3.0-Only OR CERN-OHL-S-2.0
/*
* Copyright (C) 2022 Sean Anderson <seanga2@gmail.com>
*
* PHY with internal (unexposed) MII and a wishbone management interface
*/
`include "common.vh"
`include "io.vh"
module phy_internal (
input clk_125,
input clk_250,
/* DP83223 */
input indicate_data,
input signal_detect,
output request_data,
/* MII */
input mii_tx_ce,
input mii_tx_en,
input mii_tx_er,
input [3:0] mii_txd,
output mii_rx_ce,
output mii_rx_dv,
output mii_rx_er,
output [3:0] mii_rxd,
output mii_col,
output mii_crs,
/* Wishbone management */
output wb_ack, wb_err,
input wb_cyc, wb_stb, wb_we,
input [4:0] wb_addr,
input [15:0] wb_data_write,
output [15:0] wb_data_read,
/* Control/status */
output link_status,
output receiving,
output false_carrier,
output symbol_error
);
parameter WISHBONE = 1;
parameter ENABLE_COUNTERS = 1;
parameter COUNTER_WIDTH = 15;
parameter [23:0] OUI = 0;
parameter [5:0] MODEL = 0;
parameter [3:0] REVISION = 0;
wire isolate, tx_data, signal_status, link_monitor_test, descrambler_test;
wire loopback, coltest;
wire [1:0] rx_data, rx_data_valid;
phy_core phy_core (
.clk(clk_125),
.tx_data(tx_data),
.rx_data(rx_data),
.rx_data_valid(rx_data_valid),
.signal_status(signal_status),
.tx_ce(mii_tx_ce),
.tx_en(mii_tx_en),
.txd(mii_txd),
.tx_er(mii_tx_er),
.rx_ce(mii_rx_ce),
.rx_dv(mii_rx_dv),
.rxd(mii_rxd),
.rx_er(mii_rx_er),
.crs(mii_crs),
.col(mii_col),
.loopback(loopback),
.coltest(coltest),
.link_monitor_test_mode(link_monitor_test),
.descrambler_test_mode(descrambler_test),
.link_status(link_status),
.receiving(receiving),
.false_carrier(false_carrier),
.symbol_error(symbol_error)
);
pmd_dp83223 pmd (
.clk_125(clk_125),
.clk_250(clk_250),
.signal_detect(signal_detect),
.request_data(request_data),
.indicate_data(indicate_data),
.tx_data(tx_data),
.rx_data(rx_data),
.rx_data_valid(rx_data_valid),
.signal_status(signal_status),
.loopback(loopback)
);
generate if (WISHBONE) begin
mdio_regs #(
.OUI(OUI),
.MODEL(MODEL),
.REVISION(REVISION),
.EMULATE_PULLUP(1'b1),
.ENABLE_COUNTERS(ENABLE_COUNTERS),
.COUNTER_WIDTH(COUNTER_WIDTH)
) mdio_regs (
.clk(clk_125),
.ack(wb_ack),
.err(wb_err),
.cyc(wb_cyc),
.stb(wb_stb),
.we(wb_we),
.addr(wb_addr),
.data_write(wb_data_write),
.data_read(wb_data_read),
.link_status(link_status),
.negative_wraparound(!rx_data_valid),
.positive_wraparound(rx_data_valid[1]),
.false_carrier(false_carrier),
.symbol_error(symbol_error),
.loopback(loopback),
.isolate(isolate),
.coltest(coltest),
.descrambler_test(descrambler_test),
.link_monitor_test(link_monitor_test)
);
end else begin
assign wb_ack = 0;
assign wb_err = wb_cyc && wb_stb;
assign loopback = 0;
assign coltest = 0;
assign descrambler_test = 0;
assign link_monitor_test = 0;
end endgenerate
endmodule