mirror of https://github.com/YosysHQ/yosys.git
1571 lines
30 KiB
Verilog
1571 lines
30 KiB
Verilog
/*
|
|
* yosys -- Yosys Open SYnthesis Suite
|
|
*
|
|
* Copyright (C) 2012 Clifford Wolf <clifford@clifford.at>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
* ---
|
|
*
|
|
* The Simulation Library.
|
|
*
|
|
* This verilog library contains simple simulation models for the internal
|
|
* cells ($not, ...) generated by the frontends and used in most passes.
|
|
*
|
|
* This library can be used to verify the internal netlists as generated
|
|
* by the different frontends and passes.
|
|
*
|
|
* Note that memory can only be simulated when all $memrd and $memwr cells
|
|
* have been merged to stand-alone $mem cells (this is what the "memory_collect"
|
|
* pass is doing).
|
|
*
|
|
*/
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$not (A, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = ~$signed(A);
|
|
end else begin:BLOCK2
|
|
assign Y = ~A;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$pos (A, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A);
|
|
end else begin:BLOCK2
|
|
assign Y = A;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$neg (A, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = -$signed(A);
|
|
end else begin:BLOCK2
|
|
assign Y = -A;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$and (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) & $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A & B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$or (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) | $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A | B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$xor (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) ^ $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A ^ B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$xnor (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) ~^ $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A ~^ B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$reduce_and (A, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = &$signed(A);
|
|
end else begin:BLOCK2
|
|
assign Y = &A;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$reduce_or (A, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = |$signed(A);
|
|
end else begin:BLOCK2
|
|
assign Y = |A;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$reduce_xor (A, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = ^$signed(A);
|
|
end else begin:BLOCK2
|
|
assign Y = ^A;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$reduce_xnor (A, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = ~^$signed(A);
|
|
end else begin:BLOCK2
|
|
assign Y = ~^A;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$reduce_bool (A, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = !(!$signed(A));
|
|
end else begin:BLOCK2
|
|
assign Y = !(!A);
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$shl (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) << B;
|
|
end else begin:BLOCK2
|
|
assign Y = A << B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$shr (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) >> B;
|
|
end else begin:BLOCK2
|
|
assign Y = A >> B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$sshl (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) <<< B;
|
|
end else begin:BLOCK2
|
|
assign Y = A <<< B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$sshr (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) >>> B;
|
|
end else begin:BLOCK2
|
|
assign Y = A >>> B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$shift (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(B) < 0 ? A << -B : A >> B;
|
|
end else begin:BLOCK2
|
|
assign Y = A >> B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$shiftx (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (Y_WIDTH > 0)
|
|
if (B_SIGNED) begin:BLOCK1
|
|
assign Y = A[$signed(B) +: Y_WIDTH];
|
|
end else begin:BLOCK2
|
|
assign Y = A[B +: Y_WIDTH];
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$fa (A, B, C, X, Y);
|
|
|
|
parameter WIDTH = 1;
|
|
|
|
input [WIDTH-1:0] A, B, C;
|
|
output [WIDTH-1:0] X, Y;
|
|
|
|
wire [WIDTH-1:0] t1, t2, t3;
|
|
|
|
assign t1 = A ^ B, t2 = A & B, t3 = C & t1;
|
|
assign Y = t1 ^ C, X = (t2 | t3) ^ (Y ^ Y);
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$lcu (P, G, CI, CO);
|
|
|
|
parameter WIDTH = 1;
|
|
|
|
input [WIDTH-1:0] P, G;
|
|
input CI;
|
|
|
|
output reg [WIDTH-1:0] CO;
|
|
|
|
integer i;
|
|
always @* begin
|
|
CO = 'bx;
|
|
if (^{P, G, CI} !== 1'bx) begin
|
|
CO[0] = G[0] || (P[0] && CI);
|
|
for (i = 1; i < WIDTH; i = i+1)
|
|
CO[i] = G[i] || (P[i] && CO[i-1]);
|
|
end
|
|
end
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$alu (A, B, CI, BI, X, Y, CO);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 1;
|
|
parameter B_WIDTH = 1;
|
|
parameter Y_WIDTH = 1;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] X, Y;
|
|
|
|
input CI, BI;
|
|
output [Y_WIDTH-1:0] CO;
|
|
|
|
wire [Y_WIDTH-1:0] AA, BB;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign AA = $signed(A), BB = BI ? ~$signed(B) : $signed(B);
|
|
end else begin:BLOCK2
|
|
assign AA = $unsigned(A), BB = BI ? ~$unsigned(B) : $unsigned(B);
|
|
end
|
|
endgenerate
|
|
|
|
// this is 'x' if Y and CO should be all 'x', and '0' otherwise
|
|
wire y_co_undef = ^{A, A, B, B, CI, CI, BI, BI};
|
|
|
|
assign X = AA ^ BB;
|
|
assign Y = (AA + BB + CI) ^ {Y_WIDTH{y_co_undef}};
|
|
|
|
function get_carry;
|
|
input a, b, c;
|
|
get_carry = (a&b) | (a&c) | (b&c);
|
|
endfunction
|
|
|
|
genvar i;
|
|
generate
|
|
assign CO[0] = get_carry(AA[0], BB[0], CI) ^ y_co_undef;
|
|
for (i = 1; i < Y_WIDTH; i = i+1) begin:BLOCK3
|
|
assign CO[i] = get_carry(AA[i], BB[i], CO[i-1]) ^ y_co_undef;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$lt (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) < $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A < B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$le (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) <= $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A <= B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$eq (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) == $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A == B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$ne (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) != $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A != B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$eqx (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) === $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A === B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$nex (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) !== $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A !== B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$ge (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) >= $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A >= B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$gt (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) > $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A > B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$add (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) + $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A + B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$sub (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) - $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A - B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$mul (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) * $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A * B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$macc (A, B, Y);
|
|
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
parameter CONFIG = 4'b0000;
|
|
parameter CONFIG_WIDTH = 4;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output reg [Y_WIDTH-1:0] Y;
|
|
|
|
// Xilinx XSIM does not like $clog2() below..
|
|
function integer my_clog2;
|
|
input integer v;
|
|
begin
|
|
if (v > 0)
|
|
v = v - 1;
|
|
my_clog2 = 0;
|
|
while (v) begin
|
|
v = v >> 1;
|
|
my_clog2 = my_clog2 + 1;
|
|
end
|
|
end
|
|
endfunction
|
|
|
|
localparam integer num_bits = CONFIG[3:0] > 0 ? CONFIG[3:0] : 1;
|
|
localparam integer num_ports = (CONFIG_WIDTH-4) / (2 + 2*num_bits);
|
|
localparam integer num_abits = my_clog2(A_WIDTH) > 0 ? my_clog2(A_WIDTH) : 1;
|
|
|
|
function [2*num_ports*num_abits-1:0] get_port_offsets;
|
|
input [CONFIG_WIDTH-1:0] cfg;
|
|
integer i, cursor;
|
|
begin
|
|
cursor = 0;
|
|
get_port_offsets = 0;
|
|
for (i = 0; i < num_ports; i = i+1) begin
|
|
get_port_offsets[(2*i + 0)*num_abits +: num_abits] = cursor;
|
|
cursor = cursor + cfg[4 + i*(2 + 2*num_bits) + 2 +: num_bits];
|
|
get_port_offsets[(2*i + 1)*num_abits +: num_abits] = cursor;
|
|
cursor = cursor + cfg[4 + i*(2 + 2*num_bits) + 2 + num_bits +: num_bits];
|
|
end
|
|
end
|
|
endfunction
|
|
|
|
localparam [2*num_ports*num_abits-1:0] port_offsets = get_port_offsets(CONFIG);
|
|
|
|
`define PORT_IS_SIGNED (0 + CONFIG[4 + i*(2 + 2*num_bits)])
|
|
`define PORT_DO_SUBTRACT (0 + CONFIG[4 + i*(2 + 2*num_bits) + 1])
|
|
`define PORT_SIZE_A (0 + CONFIG[4 + i*(2 + 2*num_bits) + 2 +: num_bits])
|
|
`define PORT_SIZE_B (0 + CONFIG[4 + i*(2 + 2*num_bits) + 2 + num_bits +: num_bits])
|
|
`define PORT_OFFSET_A (0 + port_offsets[2*i*num_abits +: num_abits])
|
|
`define PORT_OFFSET_B (0 + port_offsets[2*i*num_abits + num_abits +: num_abits])
|
|
|
|
integer i, j;
|
|
reg [Y_WIDTH-1:0] tmp_a, tmp_b;
|
|
|
|
always @* begin
|
|
Y = 0;
|
|
for (i = 0; i < num_ports; i = i+1)
|
|
begin
|
|
tmp_a = 0;
|
|
tmp_b = 0;
|
|
|
|
for (j = 0; j < `PORT_SIZE_A; j = j+1)
|
|
tmp_a[j] = A[`PORT_OFFSET_A + j];
|
|
|
|
if (`PORT_IS_SIGNED && `PORT_SIZE_A > 0)
|
|
for (j = `PORT_SIZE_A; j < Y_WIDTH; j = j+1)
|
|
tmp_a[j] = tmp_a[`PORT_SIZE_A-1];
|
|
|
|
for (j = 0; j < `PORT_SIZE_B; j = j+1)
|
|
tmp_b[j] = A[`PORT_OFFSET_B + j];
|
|
|
|
if (`PORT_IS_SIGNED && `PORT_SIZE_B > 0)
|
|
for (j = `PORT_SIZE_B; j < Y_WIDTH; j = j+1)
|
|
tmp_b[j] = tmp_b[`PORT_SIZE_B-1];
|
|
|
|
if (`PORT_SIZE_B > 0)
|
|
tmp_a = tmp_a * tmp_b;
|
|
|
|
if (`PORT_DO_SUBTRACT)
|
|
Y = Y - tmp_a;
|
|
else
|
|
Y = Y + tmp_a;
|
|
end
|
|
for (i = 0; i < B_WIDTH; i = i+1) begin
|
|
Y = Y + B[i];
|
|
end
|
|
end
|
|
|
|
`undef PORT_IS_SIGNED
|
|
`undef PORT_DO_SUBTRACT
|
|
`undef PORT_SIZE_A
|
|
`undef PORT_SIZE_B
|
|
`undef PORT_OFFSET_A
|
|
`undef PORT_OFFSET_B
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$div (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) / $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A / B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$mod (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) % $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A % B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
`ifndef SIMLIB_NOPOW
|
|
|
|
module \$pow (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) ** $signed(B);
|
|
end else if (A_SIGNED) begin:BLOCK2
|
|
assign Y = $signed(A) ** B;
|
|
end else if (B_SIGNED) begin:BLOCK3
|
|
assign Y = A ** $signed(B);
|
|
end else begin:BLOCK4
|
|
assign Y = A ** B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
`endif
|
|
// --------------------------------------------------------
|
|
|
|
module \$logic_not (A, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED) begin:BLOCK1
|
|
assign Y = !$signed(A);
|
|
end else begin:BLOCK2
|
|
assign Y = !A;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$logic_and (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) && $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A && B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$logic_or (A, B, Y);
|
|
|
|
parameter A_SIGNED = 0;
|
|
parameter B_SIGNED = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
generate
|
|
if (A_SIGNED && B_SIGNED) begin:BLOCK1
|
|
assign Y = $signed(A) || $signed(B);
|
|
end else begin:BLOCK2
|
|
assign Y = A || B;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$slice (A, Y);
|
|
|
|
parameter OFFSET = 0;
|
|
parameter A_WIDTH = 0;
|
|
parameter Y_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
output [Y_WIDTH-1:0] Y;
|
|
|
|
assign Y = A >> OFFSET;
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$concat (A, B, Y);
|
|
|
|
parameter A_WIDTH = 0;
|
|
parameter B_WIDTH = 0;
|
|
|
|
input [A_WIDTH-1:0] A;
|
|
input [B_WIDTH-1:0] B;
|
|
output [A_WIDTH+B_WIDTH-1:0] Y;
|
|
|
|
assign Y = {B, A};
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$mux (A, B, S, Y);
|
|
|
|
parameter WIDTH = 0;
|
|
|
|
input [WIDTH-1:0] A, B;
|
|
input S;
|
|
output reg [WIDTH-1:0] Y;
|
|
|
|
always @* begin
|
|
if (S)
|
|
Y = B;
|
|
else
|
|
Y = A;
|
|
end
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$pmux (A, B, S, Y);
|
|
|
|
parameter WIDTH = 0;
|
|
parameter S_WIDTH = 0;
|
|
|
|
input [WIDTH-1:0] A;
|
|
input [WIDTH*S_WIDTH-1:0] B;
|
|
input [S_WIDTH-1:0] S;
|
|
output reg [WIDTH-1:0] Y;
|
|
|
|
integer i;
|
|
reg found_active_sel_bit;
|
|
|
|
always @* begin
|
|
Y = A;
|
|
found_active_sel_bit = 0;
|
|
for (i = 0; i < S_WIDTH; i = i+1)
|
|
if (S[i]) begin
|
|
Y = found_active_sel_bit ? 'bx : B >> (WIDTH*i);
|
|
found_active_sel_bit = 1;
|
|
end
|
|
end
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
`ifndef SIMLIB_NOLUT
|
|
|
|
module \$lut (A, Y);
|
|
|
|
parameter WIDTH = 0;
|
|
parameter LUT = 0;
|
|
|
|
input [WIDTH-1:0] A;
|
|
output reg Y;
|
|
|
|
wire lut0_out, lut1_out;
|
|
|
|
generate
|
|
if (WIDTH <= 1) begin:simple
|
|
assign {lut1_out, lut0_out} = LUT;
|
|
end else begin:complex
|
|
\$lut #( .WIDTH(WIDTH-1), .LUT(LUT ) ) lut0 ( .A(A[WIDTH-2:0]), .Y(lut0_out) );
|
|
\$lut #( .WIDTH(WIDTH-1), .LUT(LUT >> (2**(WIDTH-1))) ) lut1 ( .A(A[WIDTH-2:0]), .Y(lut1_out) );
|
|
end
|
|
|
|
if (WIDTH > 0) begin:lutlogic
|
|
always @* begin
|
|
casez ({A[WIDTH-1], lut0_out, lut1_out})
|
|
3'b?11: Y = 1'b1;
|
|
3'b?00: Y = 1'b0;
|
|
3'b0??: Y = lut0_out;
|
|
3'b1??: Y = lut1_out;
|
|
default: Y = 1'bx;
|
|
endcase
|
|
end
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
`endif
|
|
// --------------------------------------------------------
|
|
|
|
module \$assert (A, EN);
|
|
|
|
input A, EN;
|
|
|
|
always @* begin
|
|
if (A !== 1'b1 && EN === 1'b1) begin
|
|
$display("Assertation failed!");
|
|
$finish;
|
|
end
|
|
end
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
`ifndef SIMLIB_NOSR
|
|
|
|
module \$sr (SET, CLR, Q);
|
|
|
|
parameter WIDTH = 0;
|
|
parameter SET_POLARITY = 1'b1;
|
|
parameter CLR_POLARITY = 1'b1;
|
|
|
|
input [WIDTH-1:0] SET, CLR;
|
|
output reg [WIDTH-1:0] Q;
|
|
|
|
wire [WIDTH-1:0] pos_set = SET_POLARITY ? SET : ~SET;
|
|
wire [WIDTH-1:0] pos_clr = CLR_POLARITY ? CLR : ~CLR;
|
|
|
|
genvar i;
|
|
generate
|
|
for (i = 0; i < WIDTH; i = i+1) begin:bit
|
|
always @(posedge pos_set[i], posedge pos_clr[i])
|
|
if (pos_clr[i])
|
|
Q[i] <= 0;
|
|
else if (pos_set[i])
|
|
Q[i] <= 1;
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
`endif
|
|
// --------------------------------------------------------
|
|
|
|
module \$dff (CLK, D, Q);
|
|
|
|
parameter WIDTH = 0;
|
|
parameter CLK_POLARITY = 1'b1;
|
|
|
|
input CLK;
|
|
input [WIDTH-1:0] D;
|
|
output reg [WIDTH-1:0] Q;
|
|
wire pos_clk = CLK == CLK_POLARITY;
|
|
|
|
always @(posedge pos_clk) begin
|
|
Q <= D;
|
|
end
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$dffe (CLK, EN, D, Q);
|
|
|
|
parameter WIDTH = 0;
|
|
parameter CLK_POLARITY = 1'b1;
|
|
parameter EN_POLARITY = 1'b1;
|
|
|
|
input CLK, EN;
|
|
input [WIDTH-1:0] D;
|
|
output reg [WIDTH-1:0] Q;
|
|
wire pos_clk = CLK == CLK_POLARITY;
|
|
|
|
always @(posedge pos_clk) begin
|
|
if (EN == EN_POLARITY) Q <= D;
|
|
end
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
`ifndef SIMLIB_NOSR
|
|
|
|
module \$dffsr (CLK, SET, CLR, D, Q);
|
|
|
|
parameter WIDTH = 0;
|
|
parameter CLK_POLARITY = 1'b1;
|
|
parameter SET_POLARITY = 1'b1;
|
|
parameter CLR_POLARITY = 1'b1;
|
|
|
|
input CLK;
|
|
input [WIDTH-1:0] SET, CLR, D;
|
|
output reg [WIDTH-1:0] Q;
|
|
|
|
wire pos_clk = CLK == CLK_POLARITY;
|
|
wire [WIDTH-1:0] pos_set = SET_POLARITY ? SET : ~SET;
|
|
wire [WIDTH-1:0] pos_clr = CLR_POLARITY ? CLR : ~CLR;
|
|
|
|
genvar i;
|
|
generate
|
|
for (i = 0; i < WIDTH; i = i+1) begin:bit
|
|
always @(posedge pos_set[i], posedge pos_clr[i], posedge pos_clk)
|
|
if (pos_clr[i])
|
|
Q[i] <= 0;
|
|
else if (pos_set[i])
|
|
Q[i] <= 1;
|
|
else
|
|
Q[i] <= D[i];
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
`endif
|
|
// --------------------------------------------------------
|
|
|
|
module \$adff (CLK, ARST, D, Q);
|
|
|
|
parameter WIDTH = 0;
|
|
parameter CLK_POLARITY = 1'b1;
|
|
parameter ARST_POLARITY = 1'b1;
|
|
parameter ARST_VALUE = 0;
|
|
|
|
input CLK, ARST;
|
|
input [WIDTH-1:0] D;
|
|
output reg [WIDTH-1:0] Q;
|
|
wire pos_clk = CLK == CLK_POLARITY;
|
|
wire pos_arst = ARST == ARST_POLARITY;
|
|
|
|
always @(posedge pos_clk, posedge pos_arst) begin
|
|
if (pos_arst)
|
|
Q <= ARST_VALUE;
|
|
else
|
|
Q <= D;
|
|
end
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$dlatch (EN, D, Q);
|
|
|
|
parameter WIDTH = 0;
|
|
parameter EN_POLARITY = 1'b1;
|
|
|
|
input EN;
|
|
input [WIDTH-1:0] D;
|
|
output reg [WIDTH-1:0] Q;
|
|
|
|
always @* begin
|
|
if (EN == EN_POLARITY)
|
|
Q <= D;
|
|
end
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
`ifndef SIMLIB_NOSR
|
|
|
|
module \$dlatchsr (EN, SET, CLR, D, Q);
|
|
|
|
parameter WIDTH = 0;
|
|
parameter EN_POLARITY = 1'b1;
|
|
parameter SET_POLARITY = 1'b1;
|
|
parameter CLR_POLARITY = 1'b1;
|
|
|
|
input EN;
|
|
input [WIDTH-1:0] SET, CLR, D;
|
|
output reg [WIDTH-1:0] Q;
|
|
|
|
wire pos_en = EN == EN_POLARITY;
|
|
wire [WIDTH-1:0] pos_set = SET_POLARITY ? SET : ~SET;
|
|
wire [WIDTH-1:0] pos_clr = CLR_POLARITY ? CLR : ~CLR;
|
|
|
|
genvar i;
|
|
generate
|
|
for (i = 0; i < WIDTH; i = i+1) begin:bit
|
|
always @*
|
|
if (pos_clr[i])
|
|
Q[i] <= 0;
|
|
else if (pos_set[i])
|
|
Q[i] <= 1;
|
|
else if (pos_en)
|
|
Q[i] <= D[i];
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|
|
|
|
`endif
|
|
// --------------------------------------------------------
|
|
|
|
module \$fsm (CLK, ARST, CTRL_IN, CTRL_OUT);
|
|
|
|
parameter NAME = "";
|
|
|
|
parameter CLK_POLARITY = 1'b1;
|
|
parameter ARST_POLARITY = 1'b1;
|
|
|
|
parameter CTRL_IN_WIDTH = 1;
|
|
parameter CTRL_OUT_WIDTH = 1;
|
|
|
|
parameter STATE_BITS = 1;
|
|
parameter STATE_NUM = 1;
|
|
parameter STATE_NUM_LOG2 = 1;
|
|
parameter STATE_RST = 0;
|
|
parameter STATE_TABLE = 1'b0;
|
|
|
|
parameter TRANS_NUM = 1;
|
|
parameter TRANS_TABLE = 4'b0x0x;
|
|
|
|
input CLK, ARST;
|
|
input [CTRL_IN_WIDTH-1:0] CTRL_IN;
|
|
output reg [CTRL_OUT_WIDTH-1:0] CTRL_OUT;
|
|
|
|
wire pos_clk = CLK == CLK_POLARITY;
|
|
wire pos_arst = ARST == ARST_POLARITY;
|
|
|
|
reg [STATE_BITS-1:0] state;
|
|
reg [STATE_BITS-1:0] state_tmp;
|
|
reg [STATE_BITS-1:0] next_state;
|
|
|
|
reg [STATE_BITS-1:0] tr_state_in;
|
|
reg [STATE_BITS-1:0] tr_state_out;
|
|
reg [CTRL_IN_WIDTH-1:0] tr_ctrl_in;
|
|
reg [CTRL_OUT_WIDTH-1:0] tr_ctrl_out;
|
|
|
|
integer i;
|
|
|
|
task tr_fetch;
|
|
input [31:0] tr_num;
|
|
reg [31:0] tr_pos;
|
|
reg [STATE_NUM_LOG2-1:0] state_num;
|
|
begin
|
|
tr_pos = (2*STATE_NUM_LOG2+CTRL_IN_WIDTH+CTRL_OUT_WIDTH)*tr_num;
|
|
tr_ctrl_out = TRANS_TABLE >> tr_pos;
|
|
tr_pos = tr_pos + CTRL_OUT_WIDTH;
|
|
state_num = TRANS_TABLE >> tr_pos;
|
|
tr_state_out = STATE_TABLE >> (STATE_BITS*state_num);
|
|
tr_pos = tr_pos + STATE_NUM_LOG2;
|
|
tr_ctrl_in = TRANS_TABLE >> tr_pos;
|
|
tr_pos = tr_pos + CTRL_IN_WIDTH;
|
|
state_num = TRANS_TABLE >> tr_pos;
|
|
tr_state_in = STATE_TABLE >> (STATE_BITS*state_num);
|
|
tr_pos = tr_pos + STATE_NUM_LOG2;
|
|
end
|
|
endtask
|
|
|
|
always @(posedge pos_clk, posedge pos_arst) begin
|
|
if (pos_arst) begin
|
|
state_tmp = STATE_TABLE[STATE_BITS*(STATE_RST+1)-1:STATE_BITS*STATE_RST];
|
|
for (i = 0; i < STATE_BITS; i = i+1)
|
|
if (state_tmp[i] === 1'bz)
|
|
state_tmp[i] = 0;
|
|
state <= state_tmp;
|
|
end else begin
|
|
state_tmp = next_state;
|
|
for (i = 0; i < STATE_BITS; i = i+1)
|
|
if (state_tmp[i] === 1'bz)
|
|
state_tmp[i] = 0;
|
|
state <= state_tmp;
|
|
end
|
|
end
|
|
|
|
always @(state, CTRL_IN) begin
|
|
next_state <= STATE_TABLE[STATE_BITS*(STATE_RST+1)-1:STATE_BITS*STATE_RST];
|
|
CTRL_OUT <= 'bx;
|
|
// $display("---");
|
|
// $display("Q: %b %b", state, CTRL_IN);
|
|
for (i = 0; i < TRANS_NUM; i = i+1) begin
|
|
tr_fetch(i);
|
|
// $display("T: %b %b -> %b %b [%d]", tr_state_in, tr_ctrl_in, tr_state_out, tr_ctrl_out, i);
|
|
casez ({state, CTRL_IN})
|
|
{tr_state_in, tr_ctrl_in}: begin
|
|
// $display("-> %b %b <- MATCH", state, CTRL_IN);
|
|
{next_state, CTRL_OUT} <= {tr_state_out, tr_ctrl_out};
|
|
end
|
|
endcase
|
|
end
|
|
end
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
`ifndef SIMLIB_NOMEM
|
|
|
|
module \$memrd (CLK, ADDR, DATA);
|
|
|
|
parameter MEMID = "";
|
|
parameter ABITS = 8;
|
|
parameter WIDTH = 8;
|
|
|
|
parameter CLK_ENABLE = 0;
|
|
parameter CLK_POLARITY = 0;
|
|
parameter TRANSPARENT = 0;
|
|
|
|
input CLK;
|
|
input [ABITS-1:0] ADDR;
|
|
output [WIDTH-1:0] DATA;
|
|
|
|
initial begin
|
|
if (MEMID != "") begin
|
|
$display("ERROR: Found non-simulatable instance of $memrd!");
|
|
$finish;
|
|
end
|
|
end
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$memwr (CLK, EN, ADDR, DATA);
|
|
|
|
parameter MEMID = "";
|
|
parameter ABITS = 8;
|
|
parameter WIDTH = 8;
|
|
|
|
parameter CLK_ENABLE = 0;
|
|
parameter CLK_POLARITY = 0;
|
|
parameter PRIORITY = 0;
|
|
|
|
input CLK;
|
|
input [WIDTH-1:0] EN;
|
|
input [ABITS-1:0] ADDR;
|
|
input [WIDTH-1:0] DATA;
|
|
|
|
initial begin
|
|
if (MEMID != "") begin
|
|
$display("ERROR: Found non-simulatable instance of $memwr!");
|
|
$finish;
|
|
end
|
|
end
|
|
|
|
endmodule
|
|
|
|
// --------------------------------------------------------
|
|
|
|
module \$mem (RD_CLK, RD_ADDR, RD_DATA, WR_CLK, WR_EN, WR_ADDR, WR_DATA);
|
|
|
|
parameter MEMID = "";
|
|
parameter SIZE = 256;
|
|
parameter OFFSET = 0;
|
|
parameter ABITS = 8;
|
|
parameter WIDTH = 8;
|
|
|
|
parameter RD_PORTS = 1;
|
|
parameter RD_CLK_ENABLE = 1'b1;
|
|
parameter RD_CLK_POLARITY = 1'b1;
|
|
parameter RD_TRANSPARENT = 1'b1;
|
|
|
|
parameter WR_PORTS = 1;
|
|
parameter WR_CLK_ENABLE = 1'b1;
|
|
parameter WR_CLK_POLARITY = 1'b1;
|
|
|
|
input [RD_PORTS-1:0] RD_CLK;
|
|
input [RD_PORTS*ABITS-1:0] RD_ADDR;
|
|
output reg [RD_PORTS*WIDTH-1:0] RD_DATA;
|
|
|
|
input [WR_PORTS-1:0] WR_CLK;
|
|
input [WR_PORTS*WIDTH-1:0] WR_EN;
|
|
input [WR_PORTS*ABITS-1:0] WR_ADDR;
|
|
input [WR_PORTS*WIDTH-1:0] WR_DATA;
|
|
|
|
reg [WIDTH-1:0] memory [SIZE-1:0];
|
|
|
|
integer i, j;
|
|
reg [WR_PORTS-1:0] LAST_WR_CLK;
|
|
reg [RD_PORTS-1:0] LAST_RD_CLK;
|
|
|
|
function port_active;
|
|
input clk_enable;
|
|
input clk_polarity;
|
|
input last_clk;
|
|
input this_clk;
|
|
begin
|
|
casez ({clk_enable, clk_polarity, last_clk, this_clk})
|
|
4'b0???: port_active = 1;
|
|
4'b1101: port_active = 1;
|
|
4'b1010: port_active = 1;
|
|
default: port_active = 0;
|
|
endcase
|
|
end
|
|
endfunction
|
|
|
|
always @(RD_CLK, RD_ADDR, RD_DATA, WR_CLK, WR_EN, WR_ADDR, WR_DATA) begin
|
|
`ifdef SIMLIB_MEMDELAY
|
|
#`SIMLIB_MEMDELAY;
|
|
`endif
|
|
for (i = 0; i < RD_PORTS; i = i+1) begin
|
|
if ((!RD_TRANSPARENT[i] && RD_CLK_ENABLE[i]) && port_active(RD_CLK_ENABLE[i], RD_CLK_POLARITY[i], LAST_RD_CLK[i], RD_CLK[i]))
|
|
RD_DATA[i*WIDTH +: WIDTH] <= memory[RD_ADDR[i*ABITS +: ABITS] - OFFSET];
|
|
end
|
|
|
|
for (i = 0; i < WR_PORTS; i = i+1) begin
|
|
if (port_active(WR_CLK_ENABLE[i], WR_CLK_POLARITY[i], LAST_WR_CLK[i], WR_CLK[i]))
|
|
for (j = 0; j < WIDTH; j = j+1)
|
|
if (WR_EN[i*WIDTH+j])
|
|
memory[WR_ADDR[i*ABITS +: ABITS] - OFFSET][j] = WR_DATA[i*WIDTH+j];
|
|
end
|
|
|
|
for (i = 0; i < RD_PORTS; i = i+1) begin
|
|
if ((RD_TRANSPARENT[i] || !RD_CLK_ENABLE[i]) && port_active(RD_CLK_ENABLE[i], RD_CLK_POLARITY[i], LAST_RD_CLK[i], RD_CLK[i]))
|
|
RD_DATA[i*WIDTH +: WIDTH] <= memory[RD_ADDR[i*ABITS +: ABITS] - OFFSET];
|
|
end
|
|
|
|
LAST_RD_CLK <= RD_CLK;
|
|
LAST_WR_CLK <= WR_CLK;
|
|
end
|
|
|
|
endmodule
|
|
|
|
`endif
|
|
// --------------------------------------------------------
|