mirror of https://github.com/YosysHQ/yosys.git
367 lines
11 KiB
Verilog
367 lines
11 KiB
Verilog
/*
|
|
* yosys -- Yosys Open SYnthesis Suite
|
|
*
|
|
* Copyright (C) 2012 Clifford Wolf <clifford@clifford.at>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
// See Xilinx UG953 and UG474 for a description of the cell types below.
|
|
// http://www.xilinx.com/support/documentation/user_guides/ug474_7Series_CLB.pdf
|
|
// http://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_4/ug953-vivado-7series-libraries.pdf
|
|
|
|
module VCC(output P);
|
|
assign P = 1;
|
|
endmodule
|
|
|
|
module GND(output G);
|
|
assign G = 0;
|
|
endmodule
|
|
|
|
module IBUF(output O, input I);
|
|
parameter IOSTANDARD = "default";
|
|
parameter IBUF_LOW_PWR = 0;
|
|
assign O = I;
|
|
endmodule
|
|
|
|
module OBUF(output O, input I);
|
|
parameter IOSTANDARD = "default";
|
|
parameter DRIVE = 12;
|
|
parameter SLEW = "SLOW";
|
|
assign O = I;
|
|
endmodule
|
|
|
|
module BUFG(output O, input I);
|
|
assign O = I;
|
|
endmodule
|
|
|
|
module BUFGCTRL(
|
|
output O,
|
|
input I0, input I1,
|
|
input S0, input S1,
|
|
input CE0, input CE1,
|
|
input IGNORE0, input IGNORE1);
|
|
|
|
parameter [0:0] INIT_OUT = 1'b0;
|
|
parameter PRESELECT_I0 = "FALSE";
|
|
parameter PRESELECT_I1 = "FALSE";
|
|
parameter [0:0] IS_CE0_INVERTED = 1'b0;
|
|
parameter [0:0] IS_CE1_INVERTED = 1'b0;
|
|
parameter [0:0] IS_S0_INVERTED = 1'b0;
|
|
parameter [0:0] IS_S1_INVERTED = 1'b0;
|
|
parameter [0:0] IS_IGNORE0_INVERTED = 1'b0;
|
|
parameter [0:0] IS_IGNORE1_INVERTED = 1'b0;
|
|
|
|
wire I0_internal = ((CE0 ^ IS_CE0_INVERTED) ? I0 : INIT_OUT);
|
|
wire I1_internal = ((CE1 ^ IS_CE1_INVERTED) ? I1 : INIT_OUT);
|
|
wire S0_true = (S0 ^ IS_S0_INVERTED);
|
|
wire S1_true = (S1 ^ IS_S1_INVERTED);
|
|
|
|
assign O = S0_true ? I0_internal : (S1_true ? I1_internal : INIT_OUT);
|
|
|
|
endmodule
|
|
|
|
module BUFHCE(output O, input I, input CE);
|
|
|
|
parameter [0:0] INIT_OUT = 1'b0;
|
|
parameter CE_TYPE = "SYNC";
|
|
parameter [0:0] IS_CE_INVERTED = 1'b0;
|
|
|
|
assign O = ((CE ^ IS_CE_INVERTED) ? I : INIT_OUT);
|
|
|
|
endmodule
|
|
|
|
// module OBUFT(output O, input I, T);
|
|
// assign O = T ? 1'bz : I;
|
|
// endmodule
|
|
|
|
// module IOBUF(inout IO, output O, input I, T);
|
|
// assign O = IO, IO = T ? 1'bz : I;
|
|
// endmodule
|
|
|
|
module INV(output O, input I);
|
|
assign O = !I;
|
|
endmodule
|
|
|
|
module LUT1(output O, input I0);
|
|
parameter [1:0] INIT = 0;
|
|
assign O = I0 ? INIT[1] : INIT[0];
|
|
endmodule
|
|
|
|
module LUT2(output O, input I0, I1);
|
|
parameter [3:0] INIT = 0;
|
|
wire [ 1: 0] s1 = I1 ? INIT[ 3: 2] : INIT[ 1: 0];
|
|
assign O = I0 ? s1[1] : s1[0];
|
|
endmodule
|
|
|
|
module LUT3(output O, input I0, I1, I2);
|
|
parameter [7:0] INIT = 0;
|
|
wire [ 3: 0] s2 = I2 ? INIT[ 7: 4] : INIT[ 3: 0];
|
|
wire [ 1: 0] s1 = I1 ? s2[ 3: 2] : s2[ 1: 0];
|
|
assign O = I0 ? s1[1] : s1[0];
|
|
endmodule
|
|
|
|
module LUT4(output O, input I0, I1, I2, I3);
|
|
parameter [15:0] INIT = 0;
|
|
wire [ 7: 0] s3 = I3 ? INIT[15: 8] : INIT[ 7: 0];
|
|
wire [ 3: 0] s2 = I2 ? s3[ 7: 4] : s3[ 3: 0];
|
|
wire [ 1: 0] s1 = I1 ? s2[ 3: 2] : s2[ 1: 0];
|
|
assign O = I0 ? s1[1] : s1[0];
|
|
endmodule
|
|
|
|
module LUT5(output O, input I0, I1, I2, I3, I4);
|
|
parameter [31:0] INIT = 0;
|
|
wire [15: 0] s4 = I4 ? INIT[31:16] : INIT[15: 0];
|
|
wire [ 7: 0] s3 = I3 ? s4[15: 8] : s4[ 7: 0];
|
|
wire [ 3: 0] s2 = I2 ? s3[ 7: 4] : s3[ 3: 0];
|
|
wire [ 1: 0] s1 = I1 ? s2[ 3: 2] : s2[ 1: 0];
|
|
assign O = I0 ? s1[1] : s1[0];
|
|
endmodule
|
|
|
|
module LUT6(output O, input I0, I1, I2, I3, I4, I5);
|
|
parameter [63:0] INIT = 0;
|
|
wire [31: 0] s5 = I5 ? INIT[63:32] : INIT[31: 0];
|
|
wire [15: 0] s4 = I4 ? s5[31:16] : s5[15: 0];
|
|
wire [ 7: 0] s3 = I3 ? s4[15: 8] : s4[ 7: 0];
|
|
wire [ 3: 0] s2 = I2 ? s3[ 7: 4] : s3[ 3: 0];
|
|
wire [ 1: 0] s1 = I1 ? s2[ 3: 2] : s2[ 1: 0];
|
|
assign O = I0 ? s1[1] : s1[0];
|
|
endmodule
|
|
|
|
module LUT6_2(output O6, output O5, input I0, I1, I2, I3, I4, I5);
|
|
parameter [63:0] INIT = 0;
|
|
wire [31: 0] s5 = I5 ? INIT[63:32] : INIT[31: 0];
|
|
wire [15: 0] s4 = I4 ? s5[31:16] : s5[15: 0];
|
|
wire [ 7: 0] s3 = I3 ? s4[15: 8] : s4[ 7: 0];
|
|
wire [ 3: 0] s2 = I2 ? s3[ 7: 4] : s3[ 3: 0];
|
|
wire [ 1: 0] s1 = I1 ? s2[ 3: 2] : s2[ 1: 0];
|
|
assign O6 = I0 ? s1[1] : s1[0];
|
|
|
|
wire [15: 0] s5_4 = I4 ? INIT[31:16] : INIT[15: 0];
|
|
wire [ 7: 0] s5_3 = I3 ? s5_4[15: 8] : s5_4[ 7: 0];
|
|
wire [ 3: 0] s5_2 = I2 ? s5_3[ 7: 4] : s5_3[ 3: 0];
|
|
wire [ 1: 0] s5_1 = I1 ? s5_2[ 3: 2] : s5_2[ 1: 0];
|
|
assign O5 = I0 ? s5_1[1] : s5_1[0];
|
|
endmodule
|
|
|
|
module MUXCY(output O, input CI, DI, S);
|
|
assign O = S ? CI : DI;
|
|
endmodule
|
|
|
|
module MUXF7(output O, input I0, I1, S);
|
|
assign O = S ? I1 : I0;
|
|
endmodule
|
|
|
|
module MUXF8(output O, input I0, I1, S);
|
|
assign O = S ? I1 : I0;
|
|
endmodule
|
|
|
|
module XORCY(output O, input CI, LI);
|
|
assign O = CI ^ LI;
|
|
endmodule
|
|
|
|
module CARRY4(output [3:0] CO, O, input CI, CYINIT, input [3:0] DI, S);
|
|
assign O = S ^ {CO[2:0], CI | CYINIT};
|
|
assign CO[0] = S[0] ? CI | CYINIT : DI[0];
|
|
assign CO[1] = S[1] ? CO[0] : DI[1];
|
|
assign CO[2] = S[2] ? CO[1] : DI[2];
|
|
assign CO[3] = S[3] ? CO[2] : DI[3];
|
|
endmodule
|
|
|
|
`ifdef _EXPLICIT_CARRY
|
|
|
|
module CARRY0(output CO_CHAIN, CO_FABRIC, O, input CI, CI_INIT, DI, S);
|
|
parameter CYINIT_FABRIC = 0;
|
|
wire CI_COMBINE;
|
|
if(CYINIT_FABRIC) begin
|
|
assign CI_COMBINE = CI_INIT;
|
|
end else begin
|
|
assign CI_COMBINE = CI;
|
|
end
|
|
assign CO_CHAIN = S ? CI_COMBINE : DI;
|
|
assign CO_FABRIC = S ? CI_COMBINE : DI;
|
|
assign O = S ^ CI_COMBINE;
|
|
endmodule
|
|
|
|
module CARRY(output CO_CHAIN, CO_FABRIC, O, input CI, DI, S);
|
|
assign CO_CHAIN = S ? CI : DI;
|
|
assign CO_FABRIC = S ? CI : DI;
|
|
assign O = S ^ CI;
|
|
endmodule
|
|
|
|
`endif
|
|
|
|
module FDRE (output reg Q, input C, CE, D, R);
|
|
parameter [0:0] INIT = 1'b0;
|
|
parameter [0:0] IS_C_INVERTED = 1'b0;
|
|
parameter [0:0] IS_D_INVERTED = 1'b0;
|
|
parameter [0:0] IS_R_INVERTED = 1'b0;
|
|
initial Q <= INIT;
|
|
generate case (|IS_C_INVERTED)
|
|
1'b0: always @(posedge C) if (R == !IS_R_INVERTED) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED;
|
|
1'b1: always @(negedge C) if (R == !IS_R_INVERTED) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED;
|
|
endcase endgenerate
|
|
endmodule
|
|
|
|
module FDSE (output reg Q, input C, CE, D, S);
|
|
parameter [0:0] INIT = 1'b0;
|
|
parameter [0:0] IS_C_INVERTED = 1'b0;
|
|
parameter [0:0] IS_D_INVERTED = 1'b0;
|
|
parameter [0:0] IS_S_INVERTED = 1'b0;
|
|
initial Q <= INIT;
|
|
generate case (|IS_C_INVERTED)
|
|
1'b0: always @(posedge C) if (S == !IS_S_INVERTED) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED;
|
|
1'b1: always @(negedge C) if (S == !IS_S_INVERTED) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED;
|
|
endcase endgenerate
|
|
endmodule
|
|
|
|
module FDCE (output reg Q, input C, CE, D, CLR);
|
|
parameter [0:0] INIT = 1'b0;
|
|
parameter [0:0] IS_C_INVERTED = 1'b0;
|
|
parameter [0:0] IS_D_INVERTED = 1'b0;
|
|
parameter [0:0] IS_CLR_INVERTED = 1'b0;
|
|
initial Q <= INIT;
|
|
generate case ({|IS_C_INVERTED, |IS_CLR_INVERTED})
|
|
2'b00: always @(posedge C, posedge CLR) if ( CLR) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED;
|
|
2'b01: always @(posedge C, negedge CLR) if (!CLR) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED;
|
|
2'b10: always @(negedge C, posedge CLR) if ( CLR) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED;
|
|
2'b11: always @(negedge C, negedge CLR) if (!CLR) Q <= 1'b0; else if (CE) Q <= D ^ IS_D_INVERTED;
|
|
endcase endgenerate
|
|
endmodule
|
|
|
|
module FDPE (output reg Q, input C, CE, D, PRE);
|
|
parameter [0:0] INIT = 1'b0;
|
|
parameter [0:0] IS_C_INVERTED = 1'b0;
|
|
parameter [0:0] IS_D_INVERTED = 1'b0;
|
|
parameter [0:0] IS_PRE_INVERTED = 1'b0;
|
|
initial Q <= INIT;
|
|
generate case ({|IS_C_INVERTED, |IS_PRE_INVERTED})
|
|
2'b00: always @(posedge C, posedge PRE) if ( PRE) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED;
|
|
2'b01: always @(posedge C, negedge PRE) if (!PRE) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED;
|
|
2'b10: always @(negedge C, posedge PRE) if ( PRE) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED;
|
|
2'b11: always @(negedge C, negedge PRE) if (!PRE) Q <= 1'b1; else if (CE) Q <= D ^ IS_D_INVERTED;
|
|
endcase endgenerate
|
|
endmodule
|
|
|
|
module FDRE_1 (output reg Q, input C, CE, D, R);
|
|
parameter [0:0] INIT = 1'b0;
|
|
initial Q <= INIT;
|
|
always @(negedge C) if (R) Q <= 1'b0; else if(CE) Q <= D;
|
|
endmodule
|
|
|
|
module FDSE_1 (output reg Q, input C, CE, D, S);
|
|
parameter [0:0] INIT = 1'b1;
|
|
initial Q <= INIT;
|
|
always @(negedge C) if (S) Q <= 1'b1; else if(CE) Q <= D;
|
|
endmodule
|
|
|
|
module FDCE_1 (output reg Q, input C, CE, D, CLR);
|
|
parameter [0:0] INIT = 1'b0;
|
|
initial Q <= INIT;
|
|
always @(negedge C, posedge CLR) if (CLR) Q <= 1'b0; else if (CE) Q <= D;
|
|
endmodule
|
|
|
|
module FDPE_1 (output reg Q, input C, CE, D, PRE);
|
|
parameter [0:0] INIT = 1'b1;
|
|
initial Q <= INIT;
|
|
always @(negedge C, posedge PRE) if (PRE) Q <= 1'b1; else if (CE) Q <= D;
|
|
endmodule
|
|
|
|
module RAM32X1D (
|
|
output DPO, SPO,
|
|
input D, WCLK, WE,
|
|
input A0, A1, A2, A3, A4,
|
|
input DPRA0, DPRA1, DPRA2, DPRA3, DPRA4
|
|
);
|
|
parameter INIT = 32'h0;
|
|
parameter IS_WCLK_INVERTED = 1'b0;
|
|
wire [4:0] a = {A4, A3, A2, A1, A0};
|
|
wire [4:0] dpra = {DPRA4, DPRA3, DPRA2, DPRA1, DPRA0};
|
|
reg [31:0] mem = INIT;
|
|
assign SPO = mem[a];
|
|
assign DPO = mem[dpra];
|
|
wire clk = WCLK ^ IS_WCLK_INVERTED;
|
|
always @(posedge clk) if (WE) mem[a] <= D;
|
|
endmodule
|
|
|
|
module RAM64X1D (
|
|
output DPO, SPO,
|
|
input D, WCLK, WE,
|
|
input A0, A1, A2, A3, A4, A5,
|
|
input DPRA0, DPRA1, DPRA2, DPRA3, DPRA4, DPRA5
|
|
);
|
|
parameter INIT = 64'h0;
|
|
parameter IS_WCLK_INVERTED = 1'b0;
|
|
wire [5:0] a = {A5, A4, A3, A2, A1, A0};
|
|
wire [5:0] dpra = {DPRA5, DPRA4, DPRA3, DPRA2, DPRA1, DPRA0};
|
|
reg [63:0] mem = INIT;
|
|
assign SPO = mem[a];
|
|
assign DPO = mem[dpra];
|
|
wire clk = WCLK ^ IS_WCLK_INVERTED;
|
|
always @(posedge clk) if (WE) mem[a] <= D;
|
|
endmodule
|
|
|
|
module RAM128X1D (
|
|
output DPO, SPO,
|
|
input D, WCLK, WE,
|
|
input [6:0] A, DPRA
|
|
);
|
|
parameter INIT = 128'h0;
|
|
parameter IS_WCLK_INVERTED = 1'b0;
|
|
reg [127:0] mem = INIT;
|
|
assign SPO = mem[A];
|
|
assign DPO = mem[DPRA];
|
|
wire clk = WCLK ^ IS_WCLK_INVERTED;
|
|
always @(posedge clk) if (WE) mem[A] <= D;
|
|
endmodule
|
|
|
|
module SRL16E (
|
|
output Q,
|
|
input A0, A1, A2, A3, CE, CLK, D
|
|
);
|
|
parameter [15:0] INIT = 16'h0000;
|
|
parameter [0:0] IS_CLK_INVERTED = 1'b0;
|
|
|
|
reg [15:0] r = INIT;
|
|
assign Q = r[{A3,A2,A1,A0}];
|
|
generate
|
|
if (IS_CLK_INVERTED) begin
|
|
always @(negedge CLK) if (CE) r <= { r[14:0], D };
|
|
end
|
|
else
|
|
always @(posedge CLK) if (CE) r <= { r[14:0], D };
|
|
endgenerate
|
|
endmodule
|
|
|
|
module SRLC32E (
|
|
output Q,
|
|
output Q31,
|
|
input [4:0] A,
|
|
input CE, CLK, D
|
|
);
|
|
parameter [31:0] INIT = 32'h00000000;
|
|
parameter [0:0] IS_CLK_INVERTED = 1'b0;
|
|
|
|
reg [31:0] r = INIT;
|
|
assign Q31 = r[31];
|
|
assign Q = r[A];
|
|
generate
|
|
if (IS_CLK_INVERTED) begin
|
|
always @(negedge CLK) if (CE) r <= { r[30:0], D };
|
|
end
|
|
else
|
|
always @(posedge CLK) if (CE) r <= { r[30:0], D };
|
|
endgenerate
|
|
endmodule
|