mirror of https://github.com/YosysHQ/yosys.git
291 lines
12 KiB
ReStructuredText
291 lines
12 KiB
ReStructuredText
.. _chapter:techmap:
|
|
|
|
.. todo:: less academic, check text is coherent
|
|
|
|
Technology mapping
|
|
==================
|
|
|
|
Previous chapters outlined how HDL code is transformed into an RTL netlist. The
|
|
RTL netlist is still based on abstract coarse-grain cell types like arbitrary
|
|
width adders and even multipliers. This chapter covers how an RTL netlist is
|
|
transformed into a functionally equivalent netlist utilizing the cell types
|
|
available in the target architecture.
|
|
|
|
Technology mapping is often performed in two phases. In the first phase RTL
|
|
cells are mapped to an internal library of single-bit cells (see
|
|
:ref:`sec:celllib_gates`). In the second phase this netlist of internal gate
|
|
types is transformed to a netlist of gates from the target technology library.
|
|
|
|
When the target architecture provides coarse-grain cells (such as block ram or
|
|
ALUs), these must be mapped to directly form the RTL netlist, as information on
|
|
the coarse-grain structure of the design is lost when it is mapped to bit-width
|
|
gate types.
|
|
|
|
Cell substitution
|
|
-----------------
|
|
|
|
The simplest form of technology mapping is cell substitution, as performed by
|
|
the techmap pass. This pass, when provided with a Verilog file that implements
|
|
the RTL cell types using simpler cells, simply replaces the RTL cells with the
|
|
provided implementation.
|
|
|
|
When no map file is provided, techmap uses a built-in map file that maps the
|
|
Yosys RTL cell types to the internal gate library used by Yosys. The curious
|
|
reader may find this map file as `techlibs/common/techmap.v` in the Yosys source
|
|
tree.
|
|
|
|
Additional features have been added to techmap to allow for conditional mapping
|
|
of cells (see :doc:`/cmd/techmap`). This can for example be useful if the target
|
|
architecture supports hardware multipliers for certain bit-widths but not for
|
|
others.
|
|
|
|
A usual synthesis flow would first use the techmap pass to directly map some RTL
|
|
cells to coarse-grain cells provided by the target architecture (if any) and
|
|
then use techmap with the built-in default file to map the remaining RTL cells
|
|
to gate logic.
|
|
|
|
Subcircuit substitution
|
|
-----------------------
|
|
|
|
Sometimes the target architecture provides cells that are more powerful than the
|
|
RTL cells used by Yosys. For example a cell in the target architecture that can
|
|
calculate the absolute-difference of two numbers does not match any single RTL
|
|
cell type but only combinations of cells.
|
|
|
|
For these cases Yosys provides the extract pass that can match a given set of
|
|
modules against a design and identify the portions of the design that are
|
|
identical (i.e. isomorphic subcircuits) to any of the given modules. These
|
|
matched subcircuits are then replaced by instances of the given modules.
|
|
|
|
The extract pass also finds basic variations of the given modules, such as
|
|
swapped inputs on commutative cell types.
|
|
|
|
In addition to this the extract pass also has limited support for frequent
|
|
subcircuit mining, i.e. the process of finding recurring subcircuits in the
|
|
design. This has a few applications, including the design of new coarse-grain
|
|
architectures :cite:p:`intersynthFdlBookChapter`.
|
|
|
|
The hard algorithmic work done by the extract pass (solving the isomorphic
|
|
subcircuit problem and frequent subcircuit mining) is performed using the
|
|
SubCircuit library that can also be used stand-alone without Yosys (see
|
|
:ref:`sec:SubCircuit`).
|
|
|
|
.. _sec:techmap_extern:
|
|
|
|
Gate-level technology mapping
|
|
-----------------------------
|
|
|
|
On the gate-level the target architecture is usually described by a "Liberty
|
|
file". The Liberty file format is an industry standard format that can be used
|
|
to describe the behaviour and other properties of standard library cells .
|
|
|
|
Mapping a design utilizing the Yosys internal gate library (e.g. as a result of
|
|
mapping it to this representation using the techmap pass) is performed in two
|
|
phases.
|
|
|
|
First the register cells must be mapped to the registers that are available on
|
|
the target architectures. The target architecture might not provide all
|
|
variations of d-type flip-flops with positive and negative clock edge,
|
|
high-active and low-active asynchronous set and/or reset, etc. Therefore the
|
|
process of mapping the registers might add additional inverters to the design
|
|
and thus it is important to map the register cells first.
|
|
|
|
Mapping of the register cells may be performed by using the dfflibmap pass. This
|
|
pass expects a Liberty file as argument (using the -liberty option) and only
|
|
uses the register cells from the Liberty file.
|
|
|
|
Secondly the combinational logic must be mapped to the target architecture. This
|
|
is done using the external program ABC via the abc pass by using the -liberty
|
|
option to the pass. Note that in this case only the combinatorial cells are used
|
|
from the cell library.
|
|
|
|
Occasionally Liberty files contain trade secrets (such as sensitive timing
|
|
information) that cannot be shared freely. This complicates processes such as
|
|
reporting bugs in the tools involved. When the information in the Liberty file
|
|
used by Yosys and ABC are not part of the sensitive information, the additional
|
|
tool yosys-filterlib (see :ref:`sec:filterlib`) can be used to strip the
|
|
sensitive information from the Liberty file.
|
|
|
|
Techmap by example
|
|
------------------
|
|
|
|
As a quick recap, the :cmd:ref:`techmap` command replaces cells in the design
|
|
with implementations given as Verilog code (called "map files"). It can replace
|
|
Yosys' internal cell types (such as ``$or``) as well as user-defined cell types.
|
|
|
|
- Verilog parameters are used extensively to customize the internal cell types.
|
|
- Additional special parameters are used by techmap to communicate meta-data to
|
|
the map files.
|
|
- Special wires are used to instruct techmap how to handle a module in the map
|
|
file.
|
|
- Generate blocks and recursion are powerful tools for writing map files.
|
|
|
|
Mapping OR3X1
|
|
~~~~~~~~~~~~~
|
|
|
|
.. todo:: add/expand supporting text
|
|
|
|
.. note::
|
|
|
|
This is a simple example for demonstration only. Techmap shouldn't be used
|
|
to implement basic logic optimization.
|
|
|
|
.. literalinclude:: /code_examples/techmap/red_or3x1_map.v
|
|
:language: verilog
|
|
:caption: ``docs/source/code_examples/techmap/red_or3x1_map.v``
|
|
|
|
.. figure:: /_images/code_examples/techmap/red_or3x1.*
|
|
:class: width-helper
|
|
|
|
.. literalinclude:: /code_examples/techmap/red_or3x1_test.ys
|
|
:language: yoscrypt
|
|
:caption: ``docs/source/code_examples/techmap/red_or3x1_test.ys``
|
|
|
|
.. literalinclude:: /code_examples/techmap/red_or3x1_test.v
|
|
:language: verilog
|
|
:caption: ``docs/source/code_examples/techmap/red_or3x1_test.v``
|
|
|
|
Conditional techmap
|
|
~~~~~~~~~~~~~~~~~~~
|
|
|
|
- In some cases only cells with certain properties should be substituted.
|
|
- The special wire ``_TECHMAP_FAIL_`` can be used to disable a module
|
|
in the map file for a certain set of parameters.
|
|
- The wire ``_TECHMAP_FAIL_`` must be set to a constant value. If it
|
|
is non-zero then the module is disabled for this set of parameters.
|
|
- Example use-cases:
|
|
|
|
- coarse-grain cell types that only operate on certain bit widths
|
|
- memory resources for different memory geometries (width, depth, ports, etc.)
|
|
|
|
Example:
|
|
|
|
.. figure:: /_images/code_examples/techmap/sym_mul.*
|
|
:class: width-helper
|
|
|
|
.. literalinclude:: /code_examples/techmap/sym_mul_map.v
|
|
:language: verilog
|
|
:caption: ``docs/source/code_examples/techmap/sym_mul_map.v``
|
|
|
|
.. literalinclude:: /code_examples/techmap/sym_mul_test.v
|
|
:language: verilog
|
|
:caption: ``docs/source/code_examples/techmap/sym_mul_test.v``
|
|
|
|
.. literalinclude:: /code_examples/techmap/sym_mul_test.ys
|
|
:language: yoscrypt
|
|
:caption: ``docs/source/code_examples/techmap/sym_mul_test.ys``
|
|
|
|
|
|
Scripting in map modules
|
|
~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
- The special wires ``_TECHMAP_DO_*`` can be used to run Yosys scripts
|
|
in the context of the replacement module.
|
|
- The wire that comes first in alphabetical oder is interpreted as string (must
|
|
be connected to constants) that is executed as script. Then the wire is
|
|
removed. Repeat.
|
|
- You can even call techmap recursively!
|
|
- Example use-cases:
|
|
|
|
- Using always blocks in map module: call :cmd:ref:`proc`
|
|
- Perform expensive optimizations (such as :cmd:ref:`freduce`) on cells
|
|
where this is known to work well.
|
|
- Interacting with custom commands.
|
|
|
|
.. note:: PROTIP:
|
|
|
|
Commands such as :cmd:ref:`shell`, ``show -pause``, and :cmd:ref:`dump` can
|
|
be used in the ``_TECHMAP_DO_*`` scripts for debugging map modules.
|
|
|
|
Example:
|
|
|
|
.. figure:: /_images/code_examples/techmap/mymul.*
|
|
:class: width-helper
|
|
|
|
.. literalinclude:: /code_examples/techmap/mymul_map.v
|
|
:language: verilog
|
|
:caption: ``docs/source/code_examples/techmap/mymul_map.v``
|
|
|
|
.. literalinclude:: /code_examples/techmap/mymul_test.v
|
|
:language: verilog
|
|
:caption: ``docs/source/code_examples/techmap/mymul_test.v``
|
|
|
|
.. literalinclude:: /code_examples/techmap/mymul_test.ys
|
|
:language: yoscrypt
|
|
:caption: ``docs/source/code_examples/techmap/mymul_test.ys``
|
|
|
|
Handling constant inputs
|
|
~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
- The special parameters ``_TECHMAP_CONSTMSK_<port-name>_`` and
|
|
``_TECHMAP_CONSTVAL_<port-name>_`` can be used to handle constant input values
|
|
to cells.
|
|
- The former contains 1-bits for all constant input bits on the port.
|
|
- The latter contains the constant bits or undef (x) for non-constant bits.
|
|
- Example use-cases:
|
|
|
|
- Converting arithmetic (for example multiply to shift).
|
|
- Identify constant addresses or enable bits in memory interfaces.
|
|
|
|
Example:
|
|
|
|
.. figure:: /_images/code_examples/techmap/mulshift.*
|
|
:class: width-helper
|
|
|
|
.. literalinclude:: /code_examples/techmap/mulshift_map.v
|
|
:language: verilog
|
|
:caption: ``docs/source/code_examples/techmap/mulshift_map.v``
|
|
|
|
.. literalinclude:: /code_examples/techmap/mulshift_test.v
|
|
:language: verilog
|
|
:caption: ``docs/source/code_examples/techmap/mulshift_test.v``
|
|
|
|
.. literalinclude:: /code_examples/techmap/mulshift_test.ys
|
|
:language: yoscrypt
|
|
:caption: ``docs/source/code_examples/techmap/mulshift_test.ys``
|
|
|
|
Handling shorted inputs
|
|
~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
- The special parameters ``_TECHMAP_BITS_CONNMAP_`` and
|
|
``_TECHMAP_CONNMAP_<port-name>_`` can be used to handle shorted inputs.
|
|
- Each bit of the port correlates to an ``_TECHMAP_BITS_CONNMAP_`` bits wide
|
|
number in ``_TECHMAP_CONNMAP_<port-name>_``.
|
|
- Each unique signal bit is assigned its own number. Identical fields in the ``_TECHMAP_CONNMAP_<port-name>_`` parameters mean shorted signal bits.
|
|
- The numbers 0-3 are reserved for ``0``, ``1``, ``x``, and ``z`` respectively.
|
|
- Example use-cases:
|
|
|
|
- Detecting shared clock or control signals in memory interfaces.
|
|
- In some cases this can be used for for optimization.
|
|
|
|
Example:
|
|
|
|
.. figure:: /_images/code_examples/techmap/addshift.*
|
|
:class: width-helper
|
|
|
|
.. literalinclude:: /code_examples/techmap/addshift_map.v
|
|
:language: verilog
|
|
:caption: ``docs/source/code_examples/techmap/addshift_map.v``
|
|
|
|
.. literalinclude:: /code_examples/techmap/addshift_test.v
|
|
:language: verilog
|
|
:caption: ``docs/source/code_examples/techmap/addshift_test.v``
|
|
|
|
.. literalinclude:: /code_examples/techmap/addshift_test.ys
|
|
:language: yoscrypt
|
|
:caption: ``docs/source/code_examples/techmap/addshift_test.ys``
|
|
|
|
Notes on using techmap
|
|
~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
- Don't use positional cell parameters in map modules.
|
|
- You can use the ``$__``-prefix for internal cell types to avoid
|
|
collisions with the user-namespace. But always use two underscores or the
|
|
internal consistency checker will trigger on this cells.
|
|
- Techmap has two major use cases:
|
|
|
|
- Creating good logic-level representation of arithmetic functions. This
|
|
also means using dedicated hardware resources such as half- and full-adder
|
|
cells in ASICS or dedicated carry logic in FPGAs.
|
|
- Mapping of coarse-grain resources such as block memory or DSP cells.
|