yosys/docs/source/using_yosys/synthesis/cell_libs.rst

130 lines
4.0 KiB
ReStructuredText

Mapping to cell libraries
-------------------------
.. role:: yoscrypt(code)
:language: yoscrypt
While much of this documentation focuses on the use of Yosys with FPGAs, it is
also possible to map to cell libraries which can be used in designing ASICs.
This section will cover a brief `example project`_, available in the Yosys
source code as ``docs/source/code_examples/intro/*``. The project contains a
simple ASIC synthesis script (``counter.ys``), a digital design written in
Verilog (``counter.v``), and a simple CMOS cell library (``mycells.lib``). Many
of the early steps here are already covered in more detail in the
:doc:`/getting_started/example_synth` document.
.. note::
The ``counter.ys`` script includes the commands used to generate the images
in this document. Code snippets in this document skip these commands;
including line numbers to allow the reader to follow along with the source.
To learn more about these commands, check out :ref:`interactive_show`.
.. _example project: https://github.com/YosysHQ/yosys/tree/krys/docs/docs/source/code_examples/intro
A simple counter
~~~~~~~~~~~~~~~~
First, let's quickly look at the design:
.. literalinclude:: /code_examples/intro/counter.v
:language: Verilog
:linenos:
:name: counter-v
:caption: ``counter.v``
This is a simple counter with reset and enable. If the reset signal, ``rst``,
is high then the counter will reset to 0. Otherwise, if the enable signal,
``en``, is high then the ``count`` register will increment by 1 each rising edge
of the clock, ``clk``.
Loading the design
~~~~~~~~~~~~~~~~~~
.. literalinclude:: /code_examples/intro/counter.ys
:language: yoscrypt
:lines: 1-3
:lineno-match:
:caption: ``counter.ys`` - read design
Our circuit now looks like this:
.. figure:: /_images/code_examples/intro/counter_00.*
:class: width-helper
:name: counter-hierarchy
``counter`` after :cmd:ref:`hierarchy`
Coarse-grain representation
~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. literalinclude:: /code_examples/intro/counter.ys
:language: yoscrypt
:lines: 7-10
:lineno-match:
:caption: ``counter.ys`` - the high-level stuff
.. figure:: /_images/code_examples/intro/counter_01.*
:class: width-helper
Coarse-grain representation of the ``counter`` module
Logic gate mapping
~~~~~~~~~~~~~~~~~~
.. TODO:: comment on similarities and/or differences with example_synth
.. literalinclude:: /code_examples/intro/counter.ys
:language: yoscrypt
:lines: 14-15
:lineno-match:
:caption: ``counter.ys`` - mapping to internal cell library
.. figure:: /_images/code_examples/intro/counter_02.*
:class: width-helper
``counter`` after :cmd:ref:`techmap`
Mapping to hardware
~~~~~~~~~~~~~~~~~~~
.. todo:: are we recalling or is this new information
For this example, we are using a Liberty file to describe a cell library which
our internal cell library will be mapped to:
.. literalinclude:: /code_examples/intro/mycells.lib
:language: Liberty
:linenos:
:name: mycells-lib
:caption: ``mycells.lib``
Recall that the Yosys built-in logic gate types are ``$_NOT_``, ``$_AND_``,
``$_OR_``, ``$_XOR_``, and ``$_MUX_`` with an assortment of dff memory types.
:ref:`mycells-lib` defines our target cells as ``BUF``, ``NOT``, ``NAND``,
``NOR``, and ``DFF``. Mapping between these is performed with the commands
:cmd:ref:`dfflibmap` and :cmd:ref:`abc` as follows:
.. literalinclude:: /code_examples/intro/counter.ys
:language: yoscrypt
:lines: 20-27
:lineno-match:
:caption: ``counter.ys`` - mapping to hardware
The final version of our ``counter`` module looks like this:
.. figure:: /_images/code_examples/intro/counter_03.*
:class: width-helper
``counter`` after hardware cell mapping
Before finally being output as a verilog file with :cmd:ref:`write_verilog`,
which can then be loaded into another tool:
.. literalinclude:: /code_examples/intro/counter.ys
:language: yoscrypt
:lines: 30-31
:lineno-match:
:caption: ``counter.ys`` - write synthesized design