mirror of https://github.com/YosysHQ/yosys.git
362 lines
11 KiB
Verilog
362 lines
11 KiB
Verilog
/////////////////////////////////////////////////////////////////////
|
|
//// ////
|
|
//// WISHBONE rev.B2 compliant synthesizable I2C Slave model ////
|
|
//// ////
|
|
//// ////
|
|
//// Authors: Richard Herveille (richard@asics.ws) www.asics.ws ////
|
|
//// John Sheahan (jrsheahan@optushome.com.au) ////
|
|
//// ////
|
|
//// Downloaded from: http://www.opencores.org/projects/i2c/ ////
|
|
//// ////
|
|
/////////////////////////////////////////////////////////////////////
|
|
//// ////
|
|
//// Copyright (C) 2001,2002 Richard Herveille ////
|
|
//// richard@asics.ws ////
|
|
//// ////
|
|
//// This source file may be used and distributed without ////
|
|
//// restriction provided that this copyright statement is not ////
|
|
//// removed from the file and that any derivative work contains ////
|
|
//// the original copyright notice and the associated disclaimer.////
|
|
//// ////
|
|
//// THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY ////
|
|
//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED ////
|
|
//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ////
|
|
//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR ////
|
|
//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, ////
|
|
//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ////
|
|
//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE ////
|
|
//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR ////
|
|
//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ////
|
|
//// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ////
|
|
//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT ////
|
|
//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ////
|
|
//// POSSIBILITY OF SUCH DAMAGE. ////
|
|
//// ////
|
|
/////////////////////////////////////////////////////////////////////
|
|
|
|
// CVS Log
|
|
//
|
|
// $Id: i2c_slave_model.v,v 1.7 2006-09-04 09:08:51 rherveille Exp $
|
|
//
|
|
// $Date: 2006-09-04 09:08:51 $
|
|
// $Revision: 1.7 $
|
|
// $Author: rherveille $
|
|
// $Locker: $
|
|
// $State: Exp $
|
|
//
|
|
// Change History:
|
|
// $Log: not supported by cvs2svn $
|
|
// Revision 1.6 2005/02/28 11:33:48 rherveille
|
|
// Fixed Tsu:sta timing check.
|
|
// Added Thd:sta timing check.
|
|
//
|
|
// Revision 1.5 2003/12/05 11:05:19 rherveille
|
|
// Fixed slave address MSB='1' bug
|
|
//
|
|
// Revision 1.4 2003/09/11 08:25:37 rherveille
|
|
// Fixed a bug in the timing section. Changed 'tst_scl' into 'tst_sto'.
|
|
//
|
|
// Revision 1.3 2002/10/30 18:11:06 rherveille
|
|
// Added timing tests to i2c_model.
|
|
// Updated testbench.
|
|
//
|
|
// Revision 1.2 2002/03/17 10:26:38 rherveille
|
|
// Fixed some race conditions in the i2c-slave model.
|
|
// Added debug information.
|
|
// Added headers.
|
|
//
|
|
|
|
`include "timescale.v"
|
|
|
|
module i2c_slave_model (scl, sda);
|
|
|
|
//
|
|
// parameters
|
|
//
|
|
parameter I2C_ADR = 7'b001_0000;
|
|
|
|
//
|
|
// input && outpus
|
|
//
|
|
input scl;
|
|
inout sda;
|
|
|
|
//
|
|
// Variable declaration
|
|
//
|
|
wire debug = 1'b1;
|
|
|
|
reg [7:0] mem [3:0]; // initiate memory
|
|
reg [7:0] mem_adr; // memory address
|
|
reg [7:0] mem_do; // memory data output
|
|
|
|
reg sta, d_sta;
|
|
reg sto, d_sto;
|
|
|
|
reg [7:0] sr; // 8bit shift register
|
|
reg rw; // read/write direction
|
|
|
|
wire my_adr; // my address called ??
|
|
wire i2c_reset; // i2c-statemachine reset
|
|
reg [2:0] bit_cnt; // 3bit downcounter
|
|
wire acc_done; // 8bits transfered
|
|
reg ld; // load downcounter
|
|
|
|
reg sda_o; // sda-drive level
|
|
wire sda_dly; // delayed version of sda
|
|
|
|
// statemachine declaration
|
|
parameter idle = 3'b000;
|
|
parameter slave_ack = 3'b001;
|
|
parameter get_mem_adr = 3'b010;
|
|
parameter gma_ack = 3'b011;
|
|
parameter data = 3'b100;
|
|
parameter data_ack = 3'b101;
|
|
|
|
reg [2:0] state; // synopsys enum_state
|
|
|
|
//
|
|
// module body
|
|
//
|
|
|
|
initial
|
|
begin
|
|
sda_o = 1'b1;
|
|
state = idle;
|
|
mem[0] = 0;
|
|
mem[1] = 0;
|
|
mem[2] = 0;
|
|
mem[3] = 0;
|
|
end
|
|
|
|
// generate shift register
|
|
always @(posedge scl)
|
|
sr <= #1 {sr[6:0],sda};
|
|
|
|
//detect my_address
|
|
assign my_adr = (sr[7:1] == I2C_ADR);
|
|
// FIXME: This should not be a generic assign, but rather
|
|
// qualified on address transfer phase and probably reset by stop
|
|
|
|
//generate bit-counter
|
|
always @(posedge scl)
|
|
if(ld)
|
|
bit_cnt <= #1 3'b111;
|
|
else
|
|
bit_cnt <= #1 bit_cnt - 3'h1;
|
|
|
|
//generate access done signal
|
|
assign acc_done = !(|bit_cnt);
|
|
|
|
// generate delayed version of sda
|
|
// this model assumes a hold time for sda after the falling edge of scl.
|
|
// According to the Phillips i2c spec, there s/b a 0 ns hold time for sda
|
|
// with regards to scl. If the data changes coincident with the clock, the
|
|
// acknowledge is missed
|
|
// Fix by Michael Sosnoski
|
|
assign #1 sda_dly = sda;
|
|
|
|
|
|
//detect start condition
|
|
always @(negedge sda)
|
|
if(scl)
|
|
begin
|
|
sta <= #1 1'b1;
|
|
d_sta <= #1 1'b0;
|
|
sto <= #1 1'b0;
|
|
|
|
if(debug)
|
|
$display("DEBUG i2c_slave; start condition detected at %t", $time);
|
|
end
|
|
else
|
|
sta <= #1 1'b0;
|
|
|
|
always @(posedge scl)
|
|
d_sta <= #1 sta;
|
|
|
|
// detect stop condition
|
|
always @(posedge sda)
|
|
if(scl)
|
|
begin
|
|
sta <= #1 1'b0;
|
|
sto <= #1 1'b1;
|
|
|
|
if(debug)
|
|
$display("DEBUG i2c_slave; stop condition detected at %t", $time);
|
|
end
|
|
else
|
|
sto <= #1 1'b0;
|
|
|
|
//generate i2c_reset signal
|
|
assign i2c_reset = sta || sto;
|
|
|
|
// generate statemachine
|
|
always @(negedge scl or posedge sto)
|
|
if (sto || (sta && !d_sta) )
|
|
begin
|
|
state <= #1 idle; // reset statemachine
|
|
|
|
sda_o <= #1 1'b1;
|
|
ld <= #1 1'b1;
|
|
end
|
|
else
|
|
begin
|
|
// initial settings
|
|
sda_o <= #1 1'b1;
|
|
ld <= #1 1'b0;
|
|
|
|
case(state) // synopsys full_case parallel_case
|
|
idle: // idle state
|
|
if (acc_done && my_adr)
|
|
begin
|
|
state <= #1 slave_ack;
|
|
rw <= #1 sr[0];
|
|
sda_o <= #1 1'b0; // generate i2c_ack
|
|
|
|
#2;
|
|
if(debug && rw)
|
|
$display("DEBUG i2c_slave; command byte received (read) at %t", $time);
|
|
if(debug && !rw)
|
|
$display("DEBUG i2c_slave; command byte received (write) at %t", $time);
|
|
|
|
if(rw)
|
|
begin
|
|
mem_do <= #1 mem[mem_adr % 4];
|
|
|
|
if(debug)
|
|
begin
|
|
#2 $display("DEBUG i2c_slave; data block read %x from address %x (1)", mem_do, mem_adr);
|
|
#2 $display("DEBUG i2c_slave; memcheck [0]=%x, [1]=%x, [2]=%x", mem[4'h0], mem[4'h1], mem[4'h2]);
|
|
end
|
|
end
|
|
end
|
|
|
|
slave_ack:
|
|
begin
|
|
if(rw)
|
|
begin
|
|
state <= #1 data;
|
|
sda_o <= #1 mem_do[7];
|
|
end
|
|
else
|
|
state <= #1 get_mem_adr;
|
|
|
|
ld <= #1 1'b1;
|
|
end
|
|
|
|
get_mem_adr: // wait for memory address
|
|
if(acc_done)
|
|
begin
|
|
state <= #1 gma_ack;
|
|
mem_adr <= #1 sr; // store memory address
|
|
sda_o <= #1 !(sr <= 15); // generate i2c_ack, for valid address
|
|
|
|
if(debug)
|
|
#1 $display("DEBUG i2c_slave; address received. adr=%x, ack=%b", sr, sda_o);
|
|
end
|
|
|
|
gma_ack:
|
|
begin
|
|
state <= #1 data;
|
|
ld <= #1 1'b1;
|
|
end
|
|
|
|
data: // receive or drive data
|
|
begin
|
|
if(rw)
|
|
sda_o <= #1 mem_do[7];
|
|
|
|
if(acc_done)
|
|
begin
|
|
state <= #1 data_ack;
|
|
mem_adr <= #2 mem_adr + 8'h1;
|
|
sda_o <= #1 (rw && (mem_adr <= 15) ); // send ack on write, receive ack on read
|
|
|
|
if(rw)
|
|
begin
|
|
#3 mem_do <= mem[mem_adr % 4];
|
|
|
|
if(debug)
|
|
#5 $display("DEBUG i2c_slave; data block read %x from address %x (2)", mem_do, mem_adr);
|
|
end
|
|
|
|
if(!rw)
|
|
begin
|
|
mem[ mem_adr[3:0] ] <= #1 sr; // store data in memory
|
|
|
|
if(debug)
|
|
#2 $display("DEBUG i2c_slave; data block write %x to address %x", sr, mem_adr);
|
|
end
|
|
end
|
|
end
|
|
|
|
data_ack:
|
|
begin
|
|
ld <= #1 1'b1;
|
|
|
|
if(rw)
|
|
if(sr[0]) // read operation && master send NACK
|
|
begin
|
|
state <= #1 idle;
|
|
sda_o <= #1 1'b1;
|
|
end
|
|
else
|
|
begin
|
|
state <= #1 data;
|
|
sda_o <= #1 mem_do[7];
|
|
end
|
|
else
|
|
begin
|
|
state <= #1 data;
|
|
sda_o <= #1 1'b1;
|
|
end
|
|
end
|
|
|
|
endcase
|
|
end
|
|
|
|
// read data from memory
|
|
always @(posedge scl)
|
|
if(!acc_done && rw)
|
|
mem_do <= #1 {mem_do[6:0], 1'b1}; // insert 1'b1 for host ack generation
|
|
|
|
// generate tri-states
|
|
assign sda = sda_o ? 1'bz : 1'b0;
|
|
|
|
|
|
//
|
|
// Timing checks
|
|
//
|
|
|
|
wire tst_sto = sto;
|
|
wire tst_sta = sta;
|
|
|
|
specify
|
|
specparam normal_scl_low = 4700,
|
|
normal_scl_high = 4000,
|
|
normal_tsu_sta = 4700,
|
|
normal_thd_sta = 4000,
|
|
normal_tsu_sto = 4000,
|
|
normal_tbuf = 4700,
|
|
|
|
fast_scl_low = 1300,
|
|
fast_scl_high = 600,
|
|
fast_tsu_sta = 1300,
|
|
fast_thd_sta = 600,
|
|
fast_tsu_sto = 600,
|
|
fast_tbuf = 1300;
|
|
|
|
$width(negedge scl, normal_scl_low); // scl low time
|
|
$width(posedge scl, normal_scl_high); // scl high time
|
|
|
|
$setup(posedge scl, negedge sda &&& scl, normal_tsu_sta); // setup start
|
|
$setup(negedge sda &&& scl, negedge scl, normal_thd_sta); // hold start
|
|
$setup(posedge scl, posedge sda &&& scl, normal_tsu_sto); // setup stop
|
|
|
|
$setup(posedge tst_sta, posedge tst_sto, normal_tbuf); // stop to start time
|
|
endspecify
|
|
|
|
endmodule
|
|
|
|
|