mirror of https://github.com/YosysHQ/yosys.git
320 lines
14 KiB
Verilog
320 lines
14 KiB
Verilog
/*
|
|
* yosys -- Yosys Open SYnthesis Suite
|
|
*
|
|
* Copyright (C) 2012 Clifford Wolf <clifford@clifford.at>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
// NOTE: This is still WIP.
|
|
(* techmap_celltype = "$altpll" *)
|
|
module _80_altpll_altera ( input [1:0] inclk,
|
|
input fbin,
|
|
input pllena,
|
|
input clkswitch,
|
|
input areset,
|
|
input pfdena,
|
|
input clkena,
|
|
input extclkena,
|
|
input scanclk,
|
|
input scanaclr,
|
|
input scanclkena,
|
|
input scanread,
|
|
input scanwrite,
|
|
input scandata,
|
|
input phasecounterselect,
|
|
input phaseupdown,
|
|
input phasestep,
|
|
input configupdate,
|
|
inout fbmimicbidir,
|
|
|
|
output [width_clock-1:0] clk,
|
|
output [3:0] extclk,
|
|
output [1:0] clkbad,
|
|
output enable0,
|
|
output enable1,
|
|
output activeclock,
|
|
output clkloss,
|
|
output locked,
|
|
output scandataout,
|
|
output scandone,
|
|
output sclkout0,
|
|
output sclkout1,
|
|
output phasedone,
|
|
output vcooverrange,
|
|
output vcounderrange,
|
|
output fbout,
|
|
output fref,
|
|
output icdrclk );
|
|
|
|
parameter intended_device_family = "MAX 10";
|
|
parameter operation_mode = "NORMAL";
|
|
parameter pll_type = "AUTO";
|
|
parameter qualify_conf_done = "OFF";
|
|
parameter compensate_clock = "CLK0";
|
|
parameter scan_chain = "LONG";
|
|
parameter primary_clock = "inclk0";
|
|
parameter inclk0_input_frequency = 1000;
|
|
parameter inclk1_input_frequency = 0;
|
|
parameter gate_lock_signal = "NO";
|
|
parameter gate_lock_counter = 0;
|
|
parameter lock_high = 1;
|
|
parameter lock_low = 0;
|
|
parameter valid_lock_multiplier = 1;
|
|
parameter invalid_lock_multiplier = 5;
|
|
parameter switch_over_type = "AUTO";
|
|
parameter switch_over_on_lossclk = "OFF" ;
|
|
parameter switch_over_on_gated_lock = "OFF" ;
|
|
parameter enable_switch_over_counter = "OFF";
|
|
parameter switch_over_counter = 0;
|
|
parameter feedback_source = "EXTCLK0" ;
|
|
parameter bandwidth = 0;
|
|
parameter bandwidth_type = "UNUSED";
|
|
parameter lpm_hint = "UNUSED";
|
|
parameter spread_frequency = 0;
|
|
parameter down_spread = "0.0";
|
|
parameter self_reset_on_gated_loss_lock = "OFF";
|
|
parameter self_reset_on_loss_lock = "OFF";
|
|
parameter lock_window_ui = "0.05";
|
|
parameter width_clock = 6;
|
|
parameter width_phasecounterselect = 4;
|
|
parameter charge_pump_current_bits = 9999;
|
|
parameter loop_filter_c_bits = 9999;
|
|
parameter loop_filter_r_bits = 9999;
|
|
parameter scan_chain_mif_file = "UNUSED";
|
|
parameter clk9_multiply_by = 1;
|
|
parameter clk8_multiply_by = 1;
|
|
parameter clk7_multiply_by = 1;
|
|
parameter clk6_multiply_by = 1;
|
|
parameter clk5_multiply_by = 1;
|
|
parameter clk4_multiply_by = 1;
|
|
parameter clk3_multiply_by = 1;
|
|
parameter clk2_multiply_by = 1;
|
|
parameter clk1_multiply_by = 1;
|
|
parameter clk0_multiply_by = 1;
|
|
parameter clk9_divide_by = 1;
|
|
parameter clk8_divide_by = 1;
|
|
parameter clk7_divide_by = 1;
|
|
parameter clk6_divide_by = 1;
|
|
parameter clk5_divide_by = 1;
|
|
parameter clk4_divide_by = 1;
|
|
parameter clk3_divide_by = 1;
|
|
parameter clk2_divide_by = 1;
|
|
parameter clk1_divide_by = 1;
|
|
parameter clk0_divide_by = 1;
|
|
parameter clk9_phase_shift = "0";
|
|
parameter clk8_phase_shift = "0";
|
|
parameter clk7_phase_shift = "0";
|
|
parameter clk6_phase_shift = "0";
|
|
parameter clk5_phase_shift = "0";
|
|
parameter clk4_phase_shift = "0";
|
|
parameter clk3_phase_shift = "0";
|
|
parameter clk2_phase_shift = "0";
|
|
parameter clk1_phase_shift = "0";
|
|
parameter clk0_phase_shift = "0";
|
|
|
|
parameter clk9_duty_cycle = 50;
|
|
parameter clk8_duty_cycle = 50;
|
|
parameter clk7_duty_cycle = 50;
|
|
parameter clk6_duty_cycle = 50;
|
|
parameter clk5_duty_cycle = 50;
|
|
parameter clk4_duty_cycle = 50;
|
|
parameter clk3_duty_cycle = 50;
|
|
parameter clk2_duty_cycle = 50;
|
|
parameter clk1_duty_cycle = 50;
|
|
parameter clk0_duty_cycle = 50;
|
|
|
|
parameter clk9_use_even_counter_mode = "OFF";
|
|
parameter clk8_use_even_counter_mode = "OFF";
|
|
parameter clk7_use_even_counter_mode = "OFF";
|
|
parameter clk6_use_even_counter_mode = "OFF";
|
|
parameter clk5_use_even_counter_mode = "OFF";
|
|
parameter clk4_use_even_counter_mode = "OFF";
|
|
parameter clk3_use_even_counter_mode = "OFF";
|
|
parameter clk2_use_even_counter_mode = "OFF";
|
|
parameter clk1_use_even_counter_mode = "OFF";
|
|
parameter clk0_use_even_counter_mode = "OFF";
|
|
parameter clk9_use_even_counter_value = "OFF";
|
|
parameter clk8_use_even_counter_value = "OFF";
|
|
parameter clk7_use_even_counter_value = "OFF";
|
|
parameter clk6_use_even_counter_value = "OFF";
|
|
parameter clk5_use_even_counter_value = "OFF";
|
|
parameter clk4_use_even_counter_value = "OFF";
|
|
parameter clk3_use_even_counter_value = "OFF";
|
|
parameter clk2_use_even_counter_value = "OFF";
|
|
parameter clk1_use_even_counter_value = "OFF";
|
|
parameter clk0_use_even_counter_value = "OFF";
|
|
|
|
parameter clk2_output_frequency = 0;
|
|
parameter clk1_output_frequency = 0;
|
|
parameter clk0_output_frequency = 0;
|
|
|
|
parameter vco_min = 0;
|
|
parameter vco_max = 0;
|
|
parameter vco_center = 0;
|
|
parameter pfd_min = 0;
|
|
parameter pfd_max = 0;
|
|
parameter m_initial = 1;
|
|
parameter m = 0;
|
|
parameter n = 1;
|
|
parameter m2 = 1;
|
|
parameter n2 = 1;
|
|
parameter ss = 0;
|
|
parameter l0_high = 1;
|
|
parameter l1_high = 1;
|
|
parameter g0_high = 1;
|
|
parameter g1_high = 1;
|
|
parameter g2_high = 1;
|
|
parameter g3_high = 1;
|
|
parameter e0_high = 1;
|
|
parameter e1_high = 1;
|
|
parameter e2_high = 1;
|
|
parameter e3_high = 1;
|
|
parameter l0_low = 1;
|
|
parameter l1_low = 1;
|
|
parameter g0_low = 1;
|
|
parameter g1_low = 1;
|
|
parameter g2_low = 1;
|
|
parameter g3_low = 1;
|
|
parameter e0_low = 1;
|
|
parameter e1_low = 1;
|
|
parameter e2_low = 1;
|
|
parameter e3_low = 1;
|
|
parameter l0_initial = 1;
|
|
parameter l1_initial = 1;
|
|
parameter g0_initial = 1;
|
|
parameter g1_initial = 1;
|
|
parameter g2_initial = 1;
|
|
parameter g3_initial = 1;
|
|
parameter e0_initial = 1;
|
|
parameter e1_initial = 1;
|
|
parameter e2_initial = 1;
|
|
parameter e3_initial = 1;
|
|
parameter l0_mode = "bypass";
|
|
parameter l1_mode = "bypass";
|
|
parameter g0_mode = "bypass";
|
|
parameter g1_mode = "bypass";
|
|
parameter g2_mode = "bypass";
|
|
parameter g3_mode = "bypass";
|
|
parameter e0_mode = "bypass";
|
|
parameter e1_mode = "bypass";
|
|
parameter e2_mode = "bypass";
|
|
parameter e3_mode = "bypass";
|
|
parameter l0_ph = 0;
|
|
parameter l1_ph = 0;
|
|
parameter g0_ph = 0;
|
|
parameter g1_ph = 0;
|
|
parameter g2_ph = 0;
|
|
parameter g3_ph = 0;
|
|
parameter e0_ph = 0;
|
|
parameter e1_ph = 0;
|
|
parameter e2_ph = 0;
|
|
parameter e3_ph = 0;
|
|
parameter m_ph = 0;
|
|
parameter l0_time_delay = 0;
|
|
parameter l1_time_delay = 0;
|
|
parameter g0_time_delay = 0;
|
|
parameter g1_time_delay = 0;
|
|
parameter g2_time_delay = 0;
|
|
parameter g3_time_delay = 0;
|
|
parameter e0_time_delay = 0;
|
|
parameter e1_time_delay = 0;
|
|
parameter e2_time_delay = 0;
|
|
parameter e3_time_delay = 0;
|
|
parameter m_time_delay = 0;
|
|
parameter n_time_delay = 0;
|
|
parameter extclk3_counter = "e3" ;
|
|
parameter extclk2_counter = "e2" ;
|
|
parameter extclk1_counter = "e1" ;
|
|
parameter extclk0_counter = "e0" ;
|
|
parameter clk9_counter = "c9" ;
|
|
parameter clk8_counter = "c8" ;
|
|
parameter clk7_counter = "c7" ;
|
|
parameter clk6_counter = "c6" ;
|
|
parameter clk5_counter = "l1" ;
|
|
parameter clk4_counter = "l0" ;
|
|
parameter clk3_counter = "g3" ;
|
|
parameter clk2_counter = "g2" ;
|
|
parameter clk1_counter = "g1" ;
|
|
parameter clk0_counter = "g0" ;
|
|
parameter enable0_counter = "l0";
|
|
parameter enable1_counter = "l0";
|
|
parameter charge_pump_current = 2;
|
|
parameter loop_filter_r = "1.0";
|
|
parameter loop_filter_c = 5;
|
|
parameter vco_post_scale = 0;
|
|
parameter vco_frequency_control = "AUTO";
|
|
parameter vco_phase_shift_step = 0;
|
|
parameter lpm_type = "altpll";
|
|
|
|
parameter port_clkena0 = "PORT_CONNECTIVITY";
|
|
parameter port_clkena1 = "PORT_CONNECTIVITY";
|
|
parameter port_clkena2 = "PORT_CONNECTIVITY";
|
|
parameter port_clkena3 = "PORT_CONNECTIVITY";
|
|
parameter port_clkena4 = "PORT_CONNECTIVITY";
|
|
parameter port_clkena5 = "PORT_CONNECTIVITY";
|
|
parameter port_extclkena0 = "PORT_CONNECTIVITY";
|
|
parameter port_extclkena1 = "PORT_CONNECTIVITY";
|
|
parameter port_extclkena2 = "PORT_CONNECTIVITY";
|
|
parameter port_extclkena3 = "PORT_CONNECTIVITY";
|
|
parameter port_extclk0 = "PORT_CONNECTIVITY";
|
|
parameter port_extclk1 = "PORT_CONNECTIVITY";
|
|
parameter port_extclk2 = "PORT_CONNECTIVITY";
|
|
parameter port_extclk3 = "PORT_CONNECTIVITY";
|
|
parameter port_clk0 = "PORT_CONNECTIVITY";
|
|
parameter port_clk1 = "PORT_CONNECTIVITY";
|
|
parameter port_clk2 = "PORT_CONNECTIVITY";
|
|
parameter port_clk3 = "PORT_CONNECTIVITY";
|
|
parameter port_clk4 = "PORT_CONNECTIVITY";
|
|
parameter port_clk5 = "PORT_CONNECTIVITY";
|
|
parameter port_clk6 = "PORT_CONNECTIVITY";
|
|
parameter port_clk7 = "PORT_CONNECTIVITY";
|
|
parameter port_clk8 = "PORT_CONNECTIVITY";
|
|
parameter port_clk9 = "PORT_CONNECTIVITY";
|
|
parameter port_scandata = "PORT_CONNECTIVITY";
|
|
parameter port_scandataout = "PORT_CONNECTIVITY";
|
|
parameter port_scandone = "PORT_CONNECTIVITY";
|
|
parameter port_sclkout1 = "PORT_CONNECTIVITY";
|
|
parameter port_sclkout0 = "PORT_CONNECTIVITY";
|
|
parameter port_clkbad0 = "PORT_CONNECTIVITY";
|
|
parameter port_clkbad1 = "PORT_CONNECTIVITY";
|
|
parameter port_activeclock = "PORT_CONNECTIVITY";
|
|
parameter port_clkloss = "PORT_CONNECTIVITY";
|
|
parameter port_inclk1 = "PORT_CONNECTIVITY";
|
|
parameter port_inclk0 = "PORT_CONNECTIVITY";
|
|
parameter port_fbin = "PORT_CONNECTIVITY";
|
|
parameter port_fbout = "PORT_CONNECTIVITY";
|
|
parameter port_pllena = "PORT_CONNECTIVITY";
|
|
parameter port_clkswitch = "PORT_CONNECTIVITY";
|
|
parameter port_areset = "PORT_CONNECTIVITY";
|
|
parameter port_pfdena = "PORT_CONNECTIVITY";
|
|
parameter port_scanclk = "PORT_CONNECTIVITY";
|
|
parameter port_scanaclr = "PORT_CONNECTIVITY";
|
|
parameter port_scanread = "PORT_CONNECTIVITY";
|
|
parameter port_scanwrite = "PORT_CONNECTIVITY";
|
|
parameter port_enable0 = "PORT_CONNECTIVITY";
|
|
parameter port_enable1 = "PORT_CONNECTIVITY";
|
|
parameter port_locked = "PORT_CONNECTIVITY";
|
|
parameter port_configupdate = "PORT_CONNECTIVITY";
|
|
parameter port_phasecounterselect = "PORT_CONNECTIVITY";
|
|
parameter port_phasedone = "PORT_CONNECTIVITY";
|
|
parameter port_phasestep = "PORT_CONNECTIVITY";
|
|
parameter port_phaseupdown = "PORT_CONNECTIVITY";
|
|
parameter port_vcooverrange = "PORT_CONNECTIVITY";
|
|
parameter port_vcounderrange = "PORT_CONNECTIVITY";
|
|
parameter port_scanclkena = "PORT_CONNECTIVITY";
|
|
parameter using_fbmimicbidir_port = "ON";
|
|
|
|
endmodule
|