mirror of https://github.com/YosysHQ/yosys.git
257 lines
10 KiB
Verilog
257 lines
10 KiB
Verilog
/*
|
|
* yosys -- Yosys Open SYnthesis Suite
|
|
*
|
|
* Copyright (C) 2012 Clifford Wolf <clifford@clifford.at>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
// ============================================================================
|
|
// FF mapping for Spartan 6. The primitives used are the same as Series 7,
|
|
// but with one major difference: the initial value is implied by the
|
|
// primitive type used (FFs with reset pin must have INIT set to 0 or x, FFs
|
|
// with set pin must have INIT set to 1 or x). For Yosys primitives without
|
|
// set/reset, this means we have to pick the primitive type based on the INIT
|
|
// value.
|
|
|
|
`ifndef _NO_FFS
|
|
|
|
// No reset.
|
|
|
|
module \$_DFF_N_ (input D, C, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
FDSE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .S(1'b0));
|
|
else
|
|
FDRE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .R(1'b0));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
module \$_DFF_P_ (input D, C, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
FDSE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .S(1'b0));
|
|
else
|
|
FDRE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .R(1'b0));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
|
|
// No reset, enable.
|
|
|
|
module \$_DFFE_NP_ (input D, C, E, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
FDSE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .S(1'b0));
|
|
else
|
|
FDRE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .R(1'b0));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
module \$_DFFE_PP_ (input D, C, E, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
FDSE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .S(1'b0));
|
|
else
|
|
FDRE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .R(1'b0));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
|
|
// Async reset.
|
|
|
|
module \$_DFF_NP0_ (input D, C, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
$error("Spartan 6 doesn't support FFs with asynchronous reset initialized to 1");
|
|
else
|
|
FDCE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
module \$_DFF_PP0_ (input D, C, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
$error("Spartan 6 doesn't support FFs with asynchronous reset initialized to 1");
|
|
else
|
|
FDCE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
|
|
module \$_DFF_NP1_ (input D, C, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b0)
|
|
$error("Spartan 6 doesn't support FFs with asynchronous set initialized to 0");
|
|
else
|
|
FDPE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
module \$_DFF_PP1_ (input D, C, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b0)
|
|
$error("Spartan 6 doesn't support FFs with asynchronous set initialized to 0");
|
|
else
|
|
FDPE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
|
|
// Async reset, enable.
|
|
|
|
module \$__DFFE_NP0 (input D, C, E, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
$error("Spartan 6 doesn't support FFs with asynchronous reset initialized to 1");
|
|
else
|
|
FDCE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .CLR( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
module \$__DFFE_PP0 (input D, C, E, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
$error("Spartan 6 doesn't support FFs with asynchronous reset initialized to 1");
|
|
else
|
|
FDCE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .CLR( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
|
|
module \$__DFFE_NP1 (input D, C, E, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b0)
|
|
$error("Spartan 6 doesn't support FFs with asynchronous set initialized to 0");
|
|
else
|
|
FDPE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .PRE( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
module \$__DFFE_PP1 (input D, C, E, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b0)
|
|
$error("Spartan 6 doesn't support FFs with asynchronous set initialized to 0");
|
|
else
|
|
FDPE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .PRE( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
|
|
// Sync reset.
|
|
|
|
module \$__DFFS_NP0_ (input D, C, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
$error("Spartan 6 doesn't support FFs with reset initialized to 1");
|
|
else
|
|
FDRE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .R( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
module \$__DFFS_PP0_ (input D, C, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
$error("Spartan 6 doesn't support FFs with reset initialized to 1");
|
|
else
|
|
FDRE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .R( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
|
|
module \$__DFFS_NP1_ (input D, C, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b0)
|
|
$error("Spartan 6 doesn't support FFs with set initialized to 0");
|
|
else
|
|
FDSE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .S( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
module \$__DFFS_PP1_ (input D, C, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b0)
|
|
$error("Spartan 6 doesn't support FFs with set initialized to 0");
|
|
else
|
|
FDSE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .S( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
|
|
// Sync reset, enable.
|
|
|
|
module \$__DFFSE_NP0 (input D, C, E, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
$error("Spartan 6 doesn't support FFs with reset initialized to 1");
|
|
else
|
|
FDRE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .R( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
module \$__DFFSE_PP0 (input D, C, E, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
$error("Spartan 6 doesn't support FFs with reset initialized to 1");
|
|
else
|
|
FDRE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .R( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
|
|
module \$__DFFSE_NP1 (input D, C, E, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b0)
|
|
$error("Spartan 6 doesn't support FFs with set initialized to 0");
|
|
else
|
|
FDSE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .S( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
module \$__DFFSE_PP1 (input D, C, E, R, output Q);
|
|
parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b0)
|
|
$error("Spartan 6 doesn't support FFs with set initialized to 0");
|
|
else
|
|
FDSE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .S( R));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
|
|
// Latches (no reset).
|
|
|
|
module \$_DLATCH_N_ (input E, D, output Q);
|
|
parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
LDPE #(.INIT(_TECHMAP_WIREINIT_Q_), .IS_G_INVERTED(1'b1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .PRE(1'b0));
|
|
else
|
|
LDCE #(.INIT(_TECHMAP_WIREINIT_Q_), .IS_G_INVERTED(1'b1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .CLR(1'b0));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
module \$_DLATCH_P_ (input E, D, output Q);
|
|
parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
|
|
generate if (_TECHMAP_WIREINIT_Q_ === 1'b1)
|
|
LDPE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .PRE(1'b0));
|
|
else
|
|
LDCE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .CLR(1'b0));
|
|
endgenerate
|
|
wire _TECHMAP_REMOVEINIT_Q_ = 1;
|
|
endmodule
|
|
|
|
// Latches with reset (TODO).
|
|
|
|
`endif
|
|
|