mirror of https://github.com/YosysHQ/yosys.git
248 lines
6.7 KiB
Plaintext
248 lines
6.7 KiB
Plaintext
read_verilog << EOT
|
|
|
|
module dffe_00( input clk, en,
|
|
input d1, output reg q1,
|
|
);
|
|
always @( negedge clk ) begin
|
|
if ( ~en )
|
|
q1 <= d1;
|
|
end
|
|
endmodule
|
|
|
|
module dffe_01( input clk, en,
|
|
input d1, output reg q1,
|
|
);
|
|
always @( negedge clk ) begin
|
|
if ( en )
|
|
q1 <= d1;
|
|
end
|
|
endmodule
|
|
|
|
module dffe_10( input clk, en,
|
|
input d1, output reg q1,
|
|
);
|
|
always @( posedge clk ) begin
|
|
if ( ~en )
|
|
q1 <= d1;
|
|
end
|
|
endmodule
|
|
|
|
module dffe_11( input clk, en,
|
|
input d1, output reg q1,
|
|
);
|
|
always @( posedge clk ) begin
|
|
if ( en )
|
|
q1 <= d1;
|
|
end
|
|
endmodule
|
|
|
|
module dffe_wide_11( input clk, en,
|
|
input [3:0] d1, output reg [3:0] q1,
|
|
);
|
|
always @( posedge clk ) begin
|
|
if ( en )
|
|
q1 <= d1;
|
|
end
|
|
endmodule
|
|
|
|
EOT
|
|
|
|
proc
|
|
opt
|
|
|
|
design -save before
|
|
|
|
#------------------------------------------------------------------------------
|
|
|
|
# Test -pos
|
|
|
|
clockgate -pos pdk_icg ce:clkin:clkout -tie_lo scanen
|
|
|
|
# falling edge clock flops don't get matched on -pos
|
|
select -module dffe_00 -assert-count 0 t:\\pdk_icg
|
|
select -module dffe_01 -assert-count 0 t:\\pdk_icg
|
|
# rising edge clock flops do get matched on -pos
|
|
select -module dffe_10 -assert-count 1 t:\\pdk_icg
|
|
select -module dffe_11 -assert-count 1 t:\\pdk_icg
|
|
# if necessary, EN is inverted, since the given ICG
|
|
# is assumed to have an active-high EN
|
|
select -module dffe_10 -assert-count 1 t:\$_NOT_
|
|
select -module dffe_11 -assert-count 0 t:\$_NOT_
|
|
|
|
# Extra credit: multi-bit FFs work fine as well
|
|
select -module dffe_wide_11 -assert-count 1 t:\\pdk_icg
|
|
|
|
#------------------------------------------------------------------------------
|
|
|
|
# Test -neg
|
|
|
|
design -load before
|
|
clockgate -min_net_size 1 -neg pdk_icg ce:clkin:clkout -tie_lo scanen
|
|
|
|
# falling edge clock flops do get matched on -neg
|
|
select -module dffe_00 -assert-count 1 t:\\pdk_icg
|
|
select -module dffe_01 -assert-count 1 t:\\pdk_icg
|
|
# rising edge clock flops don't get matched on -neg
|
|
select -module dffe_10 -assert-count 0 t:\\pdk_icg
|
|
select -module dffe_11 -assert-count 0 t:\\pdk_icg
|
|
# if necessary, EN is inverted, since the given ICG
|
|
# is assumed to have an active-high EN
|
|
select -module dffe_00 -assert-count 1 t:\$_NOT_
|
|
select -module dffe_01 -assert-count 0 t:\$_NOT_
|
|
|
|
#------------------------------------------------------------------------------
|
|
|
|
# Same as first case, but on fine-grained cells
|
|
|
|
design -load before
|
|
|
|
techmap
|
|
|
|
clockgate -pos pdk_icg ce:clkin:clkout -tie_lo scanen
|
|
|
|
# falling edge clock flops don't get matched on -pos
|
|
select -module dffe_00 -assert-count 0 t:\\pdk_icg
|
|
select -module dffe_01 -assert-count 0 t:\\pdk_icg
|
|
# falling edge clock flops do get matched on -pos
|
|
select -module dffe_10 -assert-count 1 t:\\pdk_icg
|
|
select -module dffe_11 -assert-count 1 t:\\pdk_icg
|
|
# if necessary, EN is inverted, since the given ICG
|
|
# is assumed to have an active-high EN
|
|
select -module dffe_10 -assert-count 1 t:\$_NOT_
|
|
select -module dffe_11 -assert-count 0 t:\$_NOT_
|
|
|
|
# Extra credit: multi-bit FFs work fine as well
|
|
select -module dffe_wide_11 -assert-count 1 t:\\pdk_icg
|
|
|
|
#------------------------------------------------------------------------------
|
|
|
|
design -load before
|
|
clockgate -min_net_size 2 -neg pdk_icg ce:clkin:clkout -tie_lo scanen
|
|
|
|
# No FF set sharing a (clock, clock enable) pair is large enough
|
|
select -module dffe_00 -assert-count 0 t:\\pdk_icg
|
|
select -module dffe_01 -assert-count 0 t:\\pdk_icg
|
|
select -module dffe_10 -assert-count 0 t:\\pdk_icg
|
|
select -module dffe_11 -assert-count 0 t:\\pdk_icg
|
|
|
|
#------------------------------------------------------------------------------
|
|
|
|
design -reset
|
|
read_rtlil << EOT
|
|
|
|
module \bad1
|
|
wire input 1 \clk
|
|
wire input 3 \d1
|
|
wire input 2 \en
|
|
wire output 4 \q1
|
|
cell $dffe $auto$ff.cc:266:slice$27
|
|
parameter \CLK_POLARITY 1
|
|
parameter \EN_POLARITY 1
|
|
parameter \WIDTH 1
|
|
connect \CLK \clk
|
|
connect \D \d1
|
|
connect \EN 1'1
|
|
connect \Q \q1
|
|
end
|
|
end
|
|
|
|
module \bad2
|
|
wire input 1 \clk
|
|
wire input 3 \d1
|
|
wire input 2 \en
|
|
wire output 4 \q1
|
|
cell $dffe $auto$ff.cc:266:slice$27
|
|
parameter \CLK_POLARITY 1
|
|
parameter \EN_POLARITY 1
|
|
parameter \WIDTH 1
|
|
connect \CLK 1'1
|
|
connect \D \d1
|
|
connect \EN \en
|
|
connect \Q \q1
|
|
end
|
|
end
|
|
|
|
EOT
|
|
|
|
# Check we don't choke on constants
|
|
clockgate -pos pdk_icg ce:clkin:clkout -tie_lo scanen
|
|
select -module bad1 -assert-count 0 t:\\pdk_icg
|
|
select -module bad2 -assert-count 0 t:\\pdk_icg
|
|
|
|
#------------------------------------------------------------------------------
|
|
|
|
# Regression test: EN is a bit from a multi-bit wire
|
|
design -reset
|
|
read_verilog << EOT
|
|
module dffe_wide_11( input clk, input [1:0] en,
|
|
input [3:0] d1, output reg [3:0] q1,
|
|
);
|
|
always @( posedge clk ) begin
|
|
if ( en[0] )
|
|
q1 <= d1;
|
|
end
|
|
endmodule
|
|
|
|
EOT
|
|
|
|
proc
|
|
opt
|
|
|
|
clockgate -pos pdk_icg ce:clkin:clkout -tie_lo scanen
|
|
select -assert-count 1 t:\\pdk_icg
|
|
|
|
#------------------------------------------------------------------------------
|
|
|
|
design -load before
|
|
clockgate -liberty clockgate.lib
|
|
|
|
# rising edge ICGs
|
|
select -module dffe_00 -assert-count 0 t:\\pos_small
|
|
select -module dffe_01 -assert-count 0 t:\\pos_small
|
|
|
|
select -module dffe_10 -assert-count 1 t:\\pos_small
|
|
select -module dffe_11 -assert-count 1 t:\\pos_small
|
|
|
|
# falling edge ICGs
|
|
select -module dffe_00 -assert-count 1 t:\\neg_small
|
|
select -module dffe_01 -assert-count 1 t:\\neg_small
|
|
|
|
select -module dffe_10 -assert-count 0 t:\\neg_small
|
|
select -module dffe_11 -assert-count 0 t:\\neg_small
|
|
|
|
# and nothing else
|
|
select -module dffe_00 -assert-count 0 t:\\pos_big
|
|
select -module dffe_01 -assert-count 0 t:\\pos_big
|
|
select -module dffe_10 -assert-count 0 t:\\pos_big
|
|
select -module dffe_11 -assert-count 0 t:\\pos_big
|
|
select -module dffe_00 -assert-count 0 t:\\pos_small_tielo
|
|
select -module dffe_01 -assert-count 0 t:\\pos_small_tielo
|
|
select -module dffe_10 -assert-count 0 t:\\pos_small_tielo
|
|
select -module dffe_11 -assert-count 0 t:\\pos_small_tielo
|
|
select -module dffe_00 -assert-count 0 t:\\neg_big
|
|
select -module dffe_01 -assert-count 0 t:\\neg_big
|
|
select -module dffe_10 -assert-count 0 t:\\neg_big
|
|
select -module dffe_11 -assert-count 0 t:\\neg_big
|
|
select -module dffe_00 -assert-count 0 t:\\neg_small_tielo
|
|
select -module dffe_01 -assert-count 0 t:\\neg_small_tielo
|
|
select -module dffe_10 -assert-count 0 t:\\neg_small_tielo
|
|
select -module dffe_11 -assert-count 0 t:\\neg_small_tielo
|
|
|
|
# if necessary, EN is inverted, since the given ICG
|
|
# is assumed to have an active-high EN
|
|
select -module dffe_10 -assert-count 1 t:\$_NOT_
|
|
select -module dffe_11 -assert-count 0 t:\$_NOT_
|
|
|
|
#------------------------------------------------------------------------------
|
|
|
|
design -load before
|
|
clockgate -liberty clockgate.lib -dont_use pos_small -dont_use neg_small
|
|
|
|
# rising edge ICGs
|
|
select -module dffe_10 -assert-count 1 t:\\pos_big
|
|
select -module dffe_11 -assert-count 1 t:\\pos_big
|
|
|
|
# falling edge ICGs
|
|
select -module dffe_00 -assert-count 1 t:\\neg_big
|
|
select -module dffe_01 -assert-count 1 t:\\neg_big
|