pattern xilinx_dsp

state <SigBit> clock
state <SigSpec> sigA sigffAmuxY sigB sigffBmuxY sigC sigM sigP
state <IdString> postAddAB postAddMuxAB
state <bool> ffAenpol ffBenpol ffMenpol ffPenpol
state <int> ffPoffset

match dsp
	select dsp->type.in(\DSP48E1)
endmatch

code sigA sigffAmuxY sigB sigffBmuxY sigM
	sigA = port(dsp, \A);
	int i;
	for (i = GetSize(sigA)-1; i > 0; i--)
		if (sigA[i] != sigA[i-1])
			break;
	// Do not remove non-const sign bit
	if (sigA[i].wire)
		++i;
	sigA.remove(i, GetSize(sigA)-i);
	sigB = port(dsp, \B);
	for (i = GetSize(sigB)-1; i > 0; i--)
		if (sigB[i] != sigB[i-1])
			break;
	// Do not remove non-const sign bit
	if (sigB[i].wire)
		++i;
	sigB.remove(i, GetSize(sigB)-i);

	SigSpec P = port(dsp, \P);
	// Only care about those bits that are used
	for (i = 0; i < GetSize(P); i++) {
		if (nusers(P[i]) <= 1)
			break;
		sigM.append(P[i]);
	}
	log_assert(nusers(P.extract_end(i)) <= 1);
	//if (GetSize(sigM) <= 10)
	//	reject;

	sigffAmuxY = SigSpec();
	sigffBmuxY = SigSpec();
endcode

match ffA
	if param(dsp, \AREG).as_int() == 0
	select ffA->type.in($dff)
	// DSP48E1 does not support clock inversion
	select param(ffA, \CLK_POLARITY).as_bool()
	filter GetSize(port(ffA, \Q)) >= GetSize(sigA)
	slice offset GetSize(port(ffA, \Q))
	filter offset+GetSize(sigA) <= GetSize(port(ffA, \Q))
	filter port(ffA, \Q).extract(offset, GetSize(sigA)) == sigA
	optional
endmatch

code sigA sigffAmuxY clock
	if (ffA) {
		for (auto b : port(ffA, \Q))
			if (b.wire->get_bool_attribute(\keep))
				reject;

		clock = port(ffA, \CLK).as_bit();

		SigSpec A = sigA;
		A.replace(port(ffA, \Q), port(ffA, \D));
		// Only search for ffAmux if ffA.Q has at
		//   least 3 users (ffA, dsp, ffAmux) and
		//   its ffA.D only has two (ffA, ffAmux)
		if (nusers(sigA) >= 3 && nusers(A) == 2)
			sigffAmuxY = sigA;
		sigA = std::move(A);
	}
endcode

match ffAmux
	if !sigffAmuxY.empty()
	select ffAmux->type.in($mux)
	index <SigSpec> port(ffAmux, \Y) === port(ffA, \D)
	filter GetSize(port(ffAmux, \Y)) >= GetSize(sigA)
	slice offset GetSize(port(ffAmux, \Y))
	filter offset+GetSize(sigA) <= GetSize(port(ffAmux, \Y))
	filter port(ffAmux, \Y).extract(offset, GetSize(sigA)) == sigA
	choice <IdString> BA {\B, \A}
	filter offset+GetSize(sigffAmuxY) <= GetSize(port(ffAmux, \Y))
	filter port(ffAmux, BA).extract(offset, GetSize(sigffAmuxY)) == sigffAmuxY
	define <bool> pol (BA == \B)
	set ffAenpol pol
	optional
endmatch

match ffB
	if param(dsp, \BREG).as_int() == 0
	select ffB->type.in($dff)
	// DSP48E1 does not support clock inversion
	select param(ffB, \CLK_POLARITY).as_bool()
	filter GetSize(port(ffB, \Q)) >= GetSize(sigB)
	slice offset GetSize(port(ffB, \Q))
	filter offset+GetSize(sigB) <= GetSize(port(ffB, \Q))
	filter port(ffB, \Q).extract(offset, GetSize(sigB)) == sigB
	optional
endmatch

code sigB sigffBmuxY clock
	if (ffB) {
		for (auto b : port(ffB, \Q))
			if (b.wire->get_bool_attribute(\keep))
				reject;

		SigBit c = port(ffB, \CLK).as_bit();
		if (clock != SigBit() && c != clock)
			reject;
		clock = c;

		SigSpec B = sigB;
		B.replace(port(ffB, \Q), port(ffB, \D));
		// Only search for ffBmux if ffB.Q has at
		//   least 3 users (ffB, dsp, ffBmux) and
		//   its ffB.D only has two (ffB, ffBmux)
		if (nusers(sigB) >= 3 && nusers(B) == 2)
			sigffBmuxY = sigB;
		sigB = std::move(B);
	}
endcode

match ffBmux
	if !sigffBmuxY.empty()
	select ffBmux->type.in($mux)
	index <SigSpec> port(ffBmux, \Y) === port(ffB, \D)
	filter GetSize(port(ffBmux, \Y)) >= GetSize(sigB)
	slice offset GetSize(port(ffBmux, \Y))
	filter offset+GetSize(sigB) <= GetSize(port(ffBmux, \Y))
	filter port(ffBmux, \Y).extract(offset, GetSize(sigB)) == sigB
	choice <IdString> BA {\B, \A}
	filter offset+GetSize(sigffBmuxY) <= GetSize(port(ffBmux, \Y))
	filter port(ffBmux, BA).extract(offset, GetSize(sigffBmuxY)) == sigffBmuxY
	define <bool> pol (BA == \B)
	set ffBenpol pol
	optional
endmatch

match ffMmux
	if param(dsp, \MREG).as_int() == 0
	if nusers(sigM) == 2
	select ffMmux->type.in($mux)
	choice <IdString> BA {\B, \A}
	// new-value net must have exactly two users: dsp and ffM
	select nusers(port(ffMmux, BA)) == 2
	define <IdString> AB (BA == \B ? \A : \B)
	// keep-last-value net must have at least three users: ffMmux, ffM, downstream sink(s)
	select nusers(port(ffMmux, AB)) >= 3
	// ffMmux output must have two users: ffMmux and ffM.D
	select nusers(port(ffMmux, \Y)) == 2
	filter GetSize(port(ffMmux, \Y)) <= GetSize(sigM)
	filter port(ffMmux, BA) == sigM.extract(0, GetSize(port(ffMmux, \Y)))
	// Remaining bits on sigM must not have any other users
	filter nusers(sigM.extract_end(GetSize(port(ffMmux, BA)))) <= 1
	define <bool> pol (BA == \B)
	set ffMenpol pol
	optional
endmatch

code sigM
	if (ffMmux)
		sigM = port(ffMmux, \Y);
endcode

match ffM_enable
	if ffMmux
	if nusers(sigM) == 2
	select ffM_enable->type.in($dff)
	// DSP48E1 does not support clock inversion
	select param(ffM_enable, \CLK_POLARITY).as_bool()
	index <SigSpec> port(ffM_enable, \D) === sigM
	index <SigSpec> port(ffM_enable, \Q) === port(ffMmux, ffMenpol ? \A : \B)
endmatch

match ffM
	if !ffM_enable
	if param(dsp, \MREG).as_int() == 0
	if nusers(sigM) == 2
	select ffM->type.in($dff)
	// DSP48E1 does not support clock inversion
	select param(ffM, \CLK_POLARITY).as_bool()
	index <SigSpec> port(ffM, \D) === sigM
	optional
endmatch

code ffM clock sigM sigP
	if (ffM_enable) {
		log_assert(!ffM);
		ffM = ffM_enable;
	}
	if (ffM) {
		sigM = port(ffM, \Q);

		for (auto b : sigM)
			if (b.wire->get_bool_attribute(\keep))
				reject;

		SigBit c = port(ffM, \CLK).as_bit();
		if (clock != SigBit() && c != clock)
			reject;
		clock = c;
	}
	sigP = sigM;
endcode

match postAdd
	// Ensure that Z mux is not already used
	if port(dsp, \OPMODE).extract(4,3).is_fully_zero()

	select postAdd->type.in($add)
	select GetSize(port(postAdd, \Y)) <= 48
	select nusers(port(postAdd, \Y)) == 2
	choice <IdString> AB {\A, \B}
	select nusers(port(postAdd, AB)) <= 3
	filter ffMmux || nusers(port(postAdd, AB)) == 2
	filter !ffMmux || nusers(port(postAdd, AB)) == 3
	filter GetSize(port(postAdd, AB)) <= GetSize(sigP)
	filter port(postAdd, AB) == sigP.extract(0, GetSize(port(postAdd, AB)))
	filter nusers(sigP.extract_end(GetSize(port(postAdd, AB)))) <= 1
	set postAddAB AB
	optional
endmatch

code sigC sigP
	if (postAdd) {
		sigC = port(postAdd, postAddAB == \A ? \B : \A);

		// TODO for DSP48E1, which will have sign extended inputs/outputs
		//int natural_mul_width = GetSize(port(dsp, \A)) + GetSize(port(dsp, \B));
		//int actual_mul_width = GetSize(sigP);
		//int actual_acc_width = GetSize(sigC);

		//if ((actual_acc_width > actual_mul_width) && (natural_mul_width > actual_mul_width))
		//	reject;
		//if ((actual_acc_width != actual_mul_width) && (param(dsp, \A_SIGNED).as_bool() != param(postAdd, \A_SIGNED).as_bool()))
		//	reject;

		sigP = port(postAdd, \Y);
	}
endcode

match ffPmux
	if param(dsp, \PREG).as_int() == 0
	// new-value net must have exactly two users: dsp and ffP
	if nusers(sigP) == 2
	select ffPmux->type.in($mux)
	// ffPmux output must have two users: ffPmux and ffP.D
	select nusers(port(ffPmux, \Y)) == 2
	filter GetSize(port(ffPmux, \Y)) >= GetSize(sigP)

	choice <IdString> BA {\B, \A}
	slice offset GetSize(port(ffPmux, \Y))
	filter offset+GetSize(sigP) <= GetSize(port(ffPmux, \Y))
	filter port(ffPmux, BA).extract(offset, GetSize(sigP)) == sigP

	define <IdString> AB (BA == \B ? \A : \B)
	// keep-last-value net must have at least three users: ffPmux, ffP, downstream sink(s)
	filter nusers(port(ffPmux, AB)) >= 3
	define <bool> pol (BA == \B)
	set ffPenpol pol
	set ffPoffset offset
	optional
endmatch

code sigP
	if (ffPmux)
		sigP.replace(port(ffPmux, ffPenpol ? \B : \A), port(ffPmux, \Y));
endcode

match ffP_enable
	if ffPmux
	if nusers(sigP) == 2
	select ffP_enable->type.in($dff)
	// DSP48E1 does not support clock inversion
	select param(ffP_enable, \CLK_POLARITY).as_bool()
	index <SigSpec> port(ffP_enable, \D) === port(ffPmux, \Y)
	index <SigSpec> port(ffP_enable, \Q) === port(ffPmux, ffPenpol ? \A : \B)
	filter GetSize(port(ffP_enable, \D)) >= GetSize(sigP)
	filter ffPoffset+GetSize(sigP) <= GetSize(port(ffP_enable, \D))
	filter port(ffP_enable, \D).extract(ffPoffset, GetSize(sigP)) == sigP
endmatch

match ffP
	if !ffP_enable
	if param(dsp, \PREG).as_int() == 0
	if nusers(sigP) == 2
	select ffP->type.in($dff)
	// DSP48E1 does not support clock inversion
	select param(ffP, \CLK_POLARITY).as_bool()
	filter GetSize(port(ffP, \D)) >= GetSize(sigP)
	slice offset GetSize(port(ffP, \D))
	filter offset+GetSize(sigP) <= GetSize(port(ffP, \D))
	filter port(ffP, \D).extract(offset, GetSize(sigP)) == sigP
	optional
endmatch

code ffP sigP clock
	if (ffP_enable) {
		log_assert(!ffP);
		ffP = ffP_enable;
	}
	if (ffP) {
		for (auto b : port(ffP, \Q))
			if (b.wire->get_bool_attribute(\keep))
				reject;

		SigBit c = port(ffP, \CLK).as_bit();

		if (clock != SigBit() && c != clock)
			reject;

		clock = c;

		sigP.replace(port(ffP, \D), port(ffP, \Q));
	}
endcode

match postAddMux
	if postAdd
	if ffP
	select postAddMux->type.in($mux)
	select nusers(port(postAddMux, \Y)) == 2
	choice <IdString> AB {\A, \B}
	index <SigSpec> port(postAddMux, AB) === sigP
	index <SigSpec> port(postAddMux, \Y) === sigC
	set postAddMuxAB AB
	optional
endmatch

code sigC
	if (postAddMux)
		sigC = port(postAddMux, postAddMuxAB == \A ? \B : \A);
endcode

code
	accept;
endcode