module mem2reg_test1(in_addr, in_data, out_addr, out_data); input [1:0] in_addr, out_addr; input [3:0] in_data; output reg [3:0] out_data; reg [3:0] array [2:0]; always @* begin array[0] = 0; array[1] = 23; array[2] = 42; array[in_addr] = in_data; out_data = array[out_addr]; end endmodule // ------------------------------------------------------ module mem2reg_test2(clk, reset, mode, addr, data); input clk, reset, mode; input [2:0] addr; output [3:0] data; (* mem2reg *) reg [3:0] mem [0:7]; assign data = mem[addr]; integer i; always @(posedge clk) begin if (reset) begin for (i=0; i<8; i=i+1) mem[i] <= i; end else if (mode) begin for (i=0; i<8; i=i+1) mem[i] <= mem[i]+1; end else begin mem[addr] <= 0; end end endmodule // ------------------------------------------------------ // http://www.reddit.com/r/yosys/comments/28d9lx/problem_with_concatenation_of_two_dimensional/ module mem2reg_test3( input clk, input [8:0] din_a, output reg [7:0] dout_a, output [7:0] dout_b); reg [7:0] dint_c [0:7]; always @(posedge clk) begin {dout_a[0], dint_c[3]} <= din_a; end assign dout_b = dint_c[3]; endmodule